SeaView SM-18-R User manual

INSTALLATION
INSTRUCTIONS
For Seaview Mast Mount:
SM-18-R
WWW.SEAVIEWGLOBAL.COM
Refer to website for most up to
date instructions and videos.

SMMBL-2
x1
SMMBR-2
x1
5/16” = 8mm 3/16” = 4.7mm
15/16” = 25mm
Tef-Gel or Equivalent
Sharpened dowel pin
X1
X2
X2
X3
X10
X12
X4
X14
X1
X1X1 X2
TOOLS NEEDED
PARTS INCLUDED
Sudbury Elastomeric
Marine Sealant is
recommended. To
purchase call 800-655-7922
or visit
www.seaviewglobal.com
1

2
1SM-18-R Mast Mount foot assembly.
Stainless
steel washer
Nylon washer
Long nylon
shoulder
washer
Long nylon
shoulder
washer
2Please note that when
installing the Seaview Mast
Mount, have it facing the
forward end of the boat.

SM-AD-ISO
3
4
If installing on a isomat mast you will need a Seaview isomat
adapter. Part number SM-AD-ISO.
Place the SM-18-R onto the mast and mark all the holes of each
mounting feet. Be sure that the mast mount is level. If the mast
mount feet are not assembled refer to the diagram step 16.
5Using a 3/16” drill bit, drill all
the marked holes.
3

6
7
Use a hole saw to drill a
hole for the cables. Be sure
to drill in the center of the
mast.
Punch a hole through the
rubber grommet using a
sharp dowel.
8Insert the rubber grommet
into the hole you drilled for
the cables.
4

9
10
Put some Tef-Gel into the
holes. Do not apply too much.
Insert the black nylon shoulder washers into the correct holes
on the mast mount feet. Use the supplied rivets to secure the
mast mount to the mast.
5

11
12
Mark two holes to fasten the anchor.
Drill the two holes.
13 Apply Tef-Gel to the two holes.
6

14 Secure the anchor to the mast using two rivets. Make sure the
lanyard is on the anchor prior to securing rivets.
15 Insert four nylon shoulder washers to the rails of the mast
mount.
Using your own hardware secure the radar to the mast mount.
7

16 Mount the radar as close to the mast as possible.
8

ISOMAT ADAPTER FLYBRIDGE
ADAPTER
SM-AD-ISO
For masts with an integral track at
the front which makes it dicult
to t a Seaview mast mount. Made
from marine grade aluminum and
powder coated brilliant white.
SM-AD-FB
Adjustable ybridge adapter kit with
35° of adjustment.
OPTIONAL ACCESSORIES
Call 800-655-7922 or visit www.seaviewglobal.com for available accessories.
SS MAST MOUNT GUARDS
Protect your radome from damage
and reduce wear and tear on the
sails with Seaview Mast Mount
Guards. Available for 18” - 24” closed
dome radars.
9

THIS PAGE IS INTENTIONALLY
LEFT PLANK.
10

Tel: [phone]
www.seaviewglobal.com
EUROPEAN OFFICE
Tel: [phone]
www.seaviewprogress.com 4-102418