Seeley Braemar SBHVD1S Series User manual

OWNER’S MANUAL
CASSETTE INVERTER
(English) (SBHVD1S SERIES)
ONOFF
HOUR

SBHVD1S Series Inverter Cassettei
INDOOR
MODEL
OUTDOOR
MODELS
CAPACITY
COOL / HEAT
SBHV07D1S Wk2.8/Wk2.7S1D70VHCS
SBHV10D1S Wk0.21/Wk0.01S1D01VHCS
SBHV12D1S Wk8.31/Wk5.11S1D21VHCS
SBHV14D1S Wk0.61/Wk0.41S1D41VHCS
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VERY
LIKELY VOID YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit to download the terms.
Warranty terms are subject to property access and industry safety standards.)
www.braemar.net.au
iSBHVD1S Series Cassette Inverter Unit
INDOOR
MODEL
OUTDOOR
MODELS
CAPACITY
COOL / HEAT
SBHV07D1S Wk2.8/Wk2.7S1D70VHCS
SBHV10D1S Wk0.21/Wk0.01S1D01VHCS
SBHV12D1S Wk8.31/Wk5.11S1D21VHCS
SBHV14D1S Wk0.61/Wk0.41S1D41VHCS
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VOID
YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit to download the terms.
Warranty terms are subject to property access and industry safety standards.)
www.braemar.net.au
iSBHVD1S Series Cassette Inverter Unit
INDOOR
MODEL
OUTDOOR
MODELS
CAPACITY
COOL / HEAT
SBHV07D1SSCHV07D1S 7.2 kW / 8.2 kW
SBHV10D1SSCHV10D1S 10.0 kW / 12.0 kW
SBHV12D1SSCHV12D1S 11.5 kW / 13.8 kW
SBHV14D1SSCHV14D1S 14.0 kW / 16.0 kW
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VERY
LIKELY VOID YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit
download the terms. to
Warranty terms are subject to property access and industry safety standards.)
www.seeleyinternational.com/warranty

1
SEELEY INTERNATIONAL - OWNER’S MANUAL
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VERY
LIKELY VOID YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit to download the terms.
Warranty terms are subject to property access and industry safety standards.)
www.braemar.net.au
INDOOR
MODEL
OUTDOOR
MODELS
CAPACITY
COOL / HEAT
SBHV07D1S Wk2.8/Wk2.7S1D70VHCS
SBHV10D1S Wk0.21/Wk0.01S1D01VHCS
SBHV12D1S Wk8.31/Wk5.11S1D21VHCS
SBHV14D1S Wk0.61/Wk0.41S1D41VHCS
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VERY
LIKELY VOID YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit to download the terms.
Warranty terms are subject to property access and industry safety standards.)
www.braemar.net.au
iSBHVD1S Series Cassette Inverter Unit
INDOOR
MODEL
OUTDOOR
MODELS
CAPACITY
COOL / HEAT
SBHV07D1S Wk2.8/Wk2.7S1D70VHCS
SBHV10D1S Wk0.21/Wk0.01S1D01VHCS
SBHV12D1S Wk8.31/Wk5.11S1D21VHCS
SBHV14D1S Wk0.61/Wk0.41S1D41VHCS
IMPORTANT
VERY IMPORTANT
ANY FAILURE TO CARRY
OUT THE REQUIRED MAINTENANCE AND SERVICING, AND ANY
FAILURE TO FILL OUT THE MAINTENANCE SCHEDULE, WILL VOID
YOUR WARRANTY.
As with any product that has moving parts or is subject to wear and tear, it is
that you maintain your air conditioner and have it regularly
serviced. Accordingly, it is a condition of warranty cover for your air conditioner
that you comply with all of the maintenance and service requirements set out
in this Manual. Compliance with these requirements will prolong the life of your
air conditioner. Further, it is also a condition of warranty cover that the
Maintenance Schedule in the Manual is filled out (by signing and dating it in
the places indicated) when the item is completed.
(For complete warranty terms, refer to the separate Warranty Booklet sold with
the product. Alternatively, visit to download the terms.
Warranty terms are subject to property access and industry safety standards.)
www.braemar.net.au
iSBHVD1S Series Cassette Inverter Unit
INDOOR
MODEL
OUTDOOR
MODELS
CAPACITY
COOL / HEAT
SBHV07D1SSCHV07D1S 7.2 kW / 8.2 kW
SBHV10D1SSCHV10D1S 10.0 kW / 12.0 kW
SBHV12D1SSCHV12D1S 11.5 kW / 13.8 kW
SBHV14D1SSCHV14D1S 14.0 kW / 16.0 kW
MAIN COMPONENTS.........................................................................................2
INTRODUCTION & SAFETY ..............................................................................3
OPERATION
REMOTE CONTROLLER..............................................................................4
CONTROLLER LAYOUT...............................................................................5
ON/OFF .........................................................................................................6
MODE ............................................................................................................6
+ / - BUTTONS ..............................................................................................6
FAN SPEED...................................................................................................6
SWING UP / DOWN ......................................................................................6
CLOCK .......................................................................................................6-7
TIMER SETTINGS.........................................................................................7
TEMP .............................................................................................................7
X-FAN ............................................................................................................7
TURBO ..........................................................................................................8
LIGHT ............................................................................................................8
SLEEP ...........................................................................................................8
LOCK FUNCTION .........................................................................................8
FAHRENHEIT / CENTIGRADE .....................................................................8
ERROR DISPLAY.....................................................................................9-10
MAINTENANCE & SERVICE.......................................................................11-12
MAINTENANCE SCHEDULE ...........................................................................13
OPERATION TIPS.............................................................................................14
TROUBLESHOOTING ......................................................................................15
WARRANTY & SERVICE..................................................................................16
SEELEY INTERNATIONAL – OWNER’S MANUAL 1
CONTENTS
MAIN COMPONENTS.........................................................................................2
INTRODUCTION & SAFETY ..............................................................................3
OPERATION
REMOTE CONTROLLER..............................................................................4
CONTROLLER LAYOUT...............................................................................5
ON/OFF .........................................................................................................6
MODE ............................................................................................................6
+ / - BUTTONS ..............................................................................................6
FAN SPEED...................................................................................................6
SWING UP / DOWN ......................................................................................6
CLOCK .......................................................................................................6-7
TIMER SETTINGS.........................................................................................7
TEMP .............................................................................................................7
X-FAN ............................................................................................................7
TURBO ..........................................................................................................8
LIGHT ............................................................................................................8
SLEEP ...........................................................................................................8
LOCK FUNCTION .........................................................................................8
FAHRENHEIT / CENTIGRADE .....................................................................8
ERROR DISPLAY.....................................................................................9-10
MAINTENANCE & SERVICE.......................................................................11-12
MAINTENANCE SCHEDULE ...........................................................................13
OPERATION TIPS.............................................................................................14
TROUBLESHOOTING ......................................................................................15
WARRANTY & SERVICE..................................................................................16
CONTENTS

SBHVD1S Series Inverter Cassette2
MAIN COMPONENTS
INDOOR UNIT
OUTDOOR UNIT
1. Drainage device
2. Condensate tube
3. Air vane
4. Connection pipe
5. Display panel
6. Remote control
7. Wired Controller
(optional)
8. Condensate tube
9. Gas Pipe
10. Liquid Pipe
8
1
2
3
4
5
67
910
Air outlet
receiver
window “88" display
timer
indicator
power
indicator
Test
button
Auto button
Air inlet

3
SEELEY INTERNATIONAL - OWNER’S MANUAL
MAIN COMPONENTS
INDOOR UNIT
OUTDOOR UNIT
1. Drainage device
2. Condensate tube
3. Air vane
4. Connection pipe
5. Display panel
6. Remote control
7. Wired Controller
(optional)
8. Condensate tube
9. Gas Pipe
10. Liquid Pipe
8
1
2
3
4
5
67
910
Air outlet
receiver
window “88" display
timer
indicator
power
indicator
Test
button
Auto button
Air inlet
INTRODUCTION & SAFETY
SEELEY INTERNATIONAL – OWNER’S MANUAL 3
Congratulations on purchasing a new
Braemar Air Conditioner!
Please keep this Manual and the
Warranty Booklet in a safe place,
along with the original purchase
documents, plus all relevant
certificates of compliance relating to
the installation work performed. Please
register the Warranty straight away, by
following the steps set out in the
Warranty Booklet.
The installer must read the Installation
Manual before installing the Braemar
Cassette Inverter Air Conditioning Unit.
The home owner/user should read the
Owner's Manual before operating the
Unit.
To ensure the warranty on the Unit is
continued and valid, the Unit must be
checked and serviced by the home
owner/user as per the requirements in
the Maintenance & Service section
and the Maintenance Schedule. This
will also prolong the life of your air
conditioner.
The home owner/user should regularly
check the Air Inlet side of the Outdoor
unit (see the diagram on page 2) to
ensure grass, leaf and other matter are
not drawn into or onto the Inlet side of
the Outdoor unit. Restriction to the air
flow across the coil will reduce the
system's capacity, and result in high
operation pressures and excessive
operating costs.
IMPORTANT!
THE AUSTRALIAN GREENHOUSE
OFFICE HAS ISSUED VARIOUS
REGULATIONS ON THE USE AND
DISPOSAL OF REFRIGERANTS IN
THE UNIT. FAILURE TO FOLLOW
THESE REGULATIONS MAY HARM
THE ENVIRONMENT AND COULD
LEAD TO THE IMPOSITION OF
SUBSTANTIAL FINES.
WHERE SPECIFIED, ONLY
QUALIFIED AND LICENSED
TECHNICIANS SHOULD PERFORM
WORK ON THIS UNIT, FAILING
WHICH THE WARRANTY ON THE
UNIT WILL BE VOID.
WARNING! This appliance is not
intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
INTRODUCTION & SAFETY
Congratulations on purchasing a new
Braemar Air Conditioner!
Please keep this Manual and the
Warranty Booklet in a safe place,
along with the original purchase
documents, plus all relevant
certificates of compliance relating to
the installation work performed. Please
register the Warranty straight away, by
following the steps set out in the
Warranty Booklet.
The installer must read the Installation
Manual before installing the Braemar
Cassette Inverter Air Conditioning Unit.
The home owner/user should read the
Owner's Manual before operating the
Unit.
To ensure the warranty on the Unit is
continued and valid, the Unit must be
checked and serviced by the home
owner/user as per the requirements in
the Maintenance & Service section
and the Maintenance Schedule. This
will also prolong the life of your air
conditioner.
The home owner/user should regularly
check the Air Inlet side of the Outdoor
unit (see the diagram on page 2) to
ensure grass, leaf and other matter are
not drawn into or onto the Inlet side of
the Outdoor unit. Restriction to the air
flow across the coil will reduce the
system's capacity, and result in high
operation pressures and excessive
operating costs.
IMPORTANT!
THE AUSTRALIAN GREENHOUSE
OFFICE HAS ISSUED VARIOUS
REGULATIONS ON THE USE AND
DISPOSAL OF REFRIGERANTS IN
THE UNIT. FAILURE TO FOLLOW
THESE REGULATIONS MAY HARM
THE ENVIRONMENT AND COULD
LEAD TO THE IMPOSITION OF
SUBSTANTIAL FINES.
WHERE SPECIFIED, ONLY
QUALIFIED AND LICENSED
TECHNICIANS SHOULD PERFORM
WORK ON THIS UNIT, FAILING
WHICH THE WARRANTY ON THE
UNIT WILL BE VOID.
WARNING! This appliance is not
intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.

SBHVD1S Series Inverter Cassette4
OPERATION
NOTE:
CHANGING BATTERIES
This is a generic remote
control, used for multiple types of air
conditioner. Not all functions shown
on the remote control may be
operational for this unit.
Push down on the battery panel to
open the battery compartment area.
Insert 2 x AAA 1.5V batteries, ensuring
the polarity aligns with the markings in
the battery compartment (refer below).
If the remote controller does not
activate, remove the batteries and re-
insert after waiting 30 seconds.
Your Braemar
has been designed
and built with reliable, quality
components. To ensure many years of
trouble free, dependable service
please read the following pages very
carefully, and please ensure that you
follow all of the instructions.
Please follow the below cautionary
notes when using the remote
controller:-
1. Ensure there are no obstructions
between the High Wall receiver and
remote controller.
2. Don’t let the remote control drop
onto hard surfaces or be subjected to
sudden shocks in any way.
The
warranty does not cover misuse or
accidental damage.
3. Don’t place the remote control in
direct sunlight, or near extremes of
temperature. This will affect the
control’s temperature reading.
4. Don’t place near strong
electromagnetic waves.
5. Don’t mix old and new batteries! If
the remote control will not be used for
a long time, remove the batteries to
avoid corrosion.
6
Cassette Air
Conditioning Unit
Don’t allow
the remote control to get wet.
. Before operating the air conditioner,
please read this manual carefully and
keep it in a safe place for future
reference.
REMOTE CONTROLLER
2

5
SEELEY INTERNATIONAL - OWNER’S MANUAL
OPERATION
NOTE:
CHANGING BATTERIES
This is a generic remote
control, used for multiple types of air
conditioner. Not all functions shown
on the remote control may be
operational for this unit.
Push down on the battery panel to
open the battery compartment area.
Insert 2 x AAA 1.5V batteries, ensuring
the polarity aligns with the markings in
the battery compartment (refer below).
If the remote controller does not
activate, remove the batteries and re-
insert after waiting 30 seconds.
Your Braemar
has been designed
and built with reliable, quality
components. To ensure many years of
trouble free, dependable service
please read the following pages very
carefully, and please ensure that you
follow all of the instructions.
Please follow the below cautionary
notes when using the remote
controller:-
1. Ensure there are no obstructions
between the High Wall receiver and
remote controller.
2. Don’t let the remote control drop
onto hard surfaces or be subjected to
sudden shocks in any way.
The
warranty does not cover misuse or
accidental damage.
3. Don’t place the remote control in
direct sunlight, or near extremes of
temperature. This will affect the
control’s temperature reading.
4. Don’t place near strong
electromagnetic waves.
5. Don’t mix old and new batteries! If
the remote control will not be used for
a long time, remove the batteries to
avoid corrosion.
6
Cassette Air
Conditioning Unit
Don’t allow
the remote control to get wet.
. Before operating the air conditioner,
please read this manual carefully and
keep it in a safe place for future
reference.
REMOTE CONTROLLER
2
CONTROLLER LAYOUT
ONOFF
HOUR
OPERATION cont.
SEELEY INTERNATIONAL – OWNER’S MANUAL 5
Signal transmitter
ON/OFF button
+ / - buttons
FAN button
CLOCK button
X-FAN button
TURBO button
SLEEP button
MODE button
SWING button
TIMER ON button
TEMP button
TIMER OFF button
LIGHT button
ONOFF
HOUR
CONTROLLER DISPLAY LAYOUT
Sleep mod
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mod
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
e
e
Send signal
X-Fan indicator
Set temperature
Set time
Turbo mode
TIMER ON /
TIMER OFF
Child lock
Light
Swing Up/Down
Set fan speed
CONTROLLER LAYOUT
ONOFF
HOUR
Signal transmitter
ON/OFF button
+ / - buttons
FAN button
CLOCK button
X-FAN button
TURBO button
SLEEP button
MODE button
SWING button
TIMER ON button
TEMP button
TIMER OFF button
LIGHT button
ONOFF
HOUR
CONTROLLER DISPLAY LAYOUT
Sleep mod
Clock
Heat mode
Fan mode
Dry mode
Cool mode
Auto mode
Operation mod
Temp. display type
:Set temp.
:Outdoor ambient temp.
:Indoor ambient temp.
e
e
Send signal
X-Fan indicator
Set temperature
Set time
Turbo mode
TIMER ON /
TIMER OFF
Child lock
Light
Swing Up/Down
Set fan speed
OPERATION cont.

SBHVD1S Series Inverter Cassette6
OPERATION cont.
ON / OFF
MODE
Press to turn the power on or off.
SLEEP function will be cancelled when
power is turned off.
Press to toggle between AUTO,
COOL, DRY, FAN and HEAT modes.
The remote controller & unit will
display the below icons:-
AUTO Mode - cycles between
COOL and HEAT modes
depending on ambient
temperature.
COOL Mode - refrigerated cooling
DRY mode - for extracting
moisture from the air.
FAN mode - Fan only operation
(no cooling).
HEAT mode - reverse cycle
heating
Use to adjust the SET temperature
within the range 16-30°C (61-86°F).
Hold the button down for quick
adjustment.
Note: TEMP adjustment is unavailable
in AUTO mode.
+ / - BUTTONS
FAN SPEED
CLOCK
Press the FAN button to toggle
between AUTO, Low, Medium and
High speed.
AUTO fan speed is default on power
up. In DRY mode, only Low FAN
speed is selected.
Press the CLOCK button to set the
clock time. will flash on the display,
and the clock can be adjusted by
pressing the ‘+’
SWING UP / DOWN
Press to adjust the UP/DOWN louvre,
each press will toggle between the
below settings:-
Where a single line indicates a fixed
position, multiple lines indicate
swinging up/down in the positions
shown.
If the louvre is set to OFF when
swinging, it will remain fixed in the last
position.
or ‘-’ buttons. Once
the correct time is set, press the
CLOCK button again to confirm the
clock setting. will be displayed
continuously, this indicates the clock
OFF
.
AUTO

7
SEELEY INTERNATIONAL - OWNER’S MANUAL
OPERATION cont.
ON / OFF
MODE
Press to turn the power on or off.
SLEEP function will be cancelled when
power is turned off.
Press to toggle between AUTO,
COOL, DRY, FAN and HEAT modes.
The remote controller & unit will
display the below icons:-
AUTO Mode - cycles between
COOL and HEAT modes
depending on ambient
temperature.
COOL Mode - refrigerated cooling
DRY mode - for extracting
moisture from the air.
FAN mode - Fan only operation
(no cooling).
HEAT mode - reverse cycle
heating
Use to adjust the SET temperature
within the range 16-30°C (61-86°F).
Hold the button down for quick
adjustment.
Note: TEMP adjustment is unavailable
in AUTO mode.
+ / - BUTTONS
FAN SPEED
CLOCK
Press the FAN button to toggle
between AUTO, Low, Medium and
High speed.
AUTO fan speed is default on power
up. In DRY mode, only Low FAN
speed is selected.
Press the CLOCK button to set the
clock time. will flash on the display,
and the clock can be adjusted by
pressing the ‘+’
SWING UP / DOWN
Press to adjust the UP/DOWN louvre,
each press will toggle between the
below settings:-
Where a single line indicates a fixed
position, multiple lines indicate
swinging up/down in the positions
shown.
If the louvre is set to OFF when
swinging, it will remain fixed in the last
position.
or ‘-’ buttons. Once
the correct time is set, press the
CLOCK button again to confirm the
clock setting. will be displayed
continuously, this indicates the clock
OFF
.
AUTO
SEELEY INTERNATIONAL – OWNER’S MANUAL 7
OPERATION cont.
CLOCK cont.
TIMER OFF
‘12:00' is the default setting after
power up. Set the correct time to
enable the TIMER function to work
correctly.
or ‘-’
buttons to adjust the clock time for the
unit to start. Holding these buttons will
produce rapid adjustment.
When complete, press the TIMER ON
button again to set.
Pressing the TIMER ON button again
will CANCEL the TIMER ON function.
or ‘-’
buttons to adjust the clock time for the
unit to stop. Holding these buttons
down will produce rapid adjustment.
TIMER SETTINGS
TIMER ON
The unit can be programmed to turn
on, turn off or a combination of both
when in standby or power ON modes.
Use the below settings.
Press the button to enter
the setup. The icon will disappear
and “ON” will blink on the remote
controller display. Use the ‘
TIMER ON
+’
Press the TIMER OFF button to enter
the setup. The icon will disappear
and “OFF” will blink on the remote
controller display. Use the ‘+’
TIMER OFF cont.
When complete, press the TIMER OFF
button again to set.
Pressing the TIMER OFF button again
will cancel the TIMER OFF function.
Press the TEMP button to toggle
between the following on the indoor
display:
SET temperature (room target
temperature)
Indoor ambient temperature
Outdoor ambient temperature
(when equipped)
TEMP
Note: remote controller will always
display the SET temperature.
The X-FAN function can be used in
COOL or DRY modes, so as to
continue operation of the indoor fan for
several minutes after the power is
turned off (so as to remove excess
moisture from the indoor coil). The
icon will be displayed.
Default setting is X-FAN ‘OFF’, and is
not available in AUTO, FAN or HEAT
modes.
X-FAN
OPERATION cont.
CLOCK cont.
TIMER OFF
‘12:00' is the default setting after
power up. Set the correct time to
enable the TIMER function to work
correctly.
or ‘-’
buttons to adjust the clock time for the
unit to start. Holding these buttons will
produce rapid adjustment.
When complete, press the TIMER ON
button again to set.
Pressing the TIMER ON button again
will CANCEL the TIMER ON function.
or ‘-’
buttons to adjust the clock time for the
unit to stop. Holding these buttons
down will produce rapid adjustment.
TIMER SETTINGS
TIMER ON
The unit can be programmed to turn
on, turn off or a combination of both
when in standby or power ON modes.
Use the below settings.
Press the button to enter
the setup. The icon will disappear
and “ON” will blink on the remote
controller display. Use the ‘
TIMER ON
+’
Press the TIMER OFF button to enter
the setup. The icon will disappear
and “OFF” will blink on the remote
controller display. Use the ‘+’
TIMER OFF cont.
When complete, press the TIMER OFF
button again to set.
Pressing the TIMER OFF button again
will cancel the TIMER OFF function.
Press the TEMP button to toggle
between the following on the indoor
display:
SET temperature (room target
temperature)
Indoor ambient temperature
Outdoor ambient temperature
(when equipped)
TEMP
Note: remote controller will always
display the SET temperature.
The X-FAN function can be used in
COOL or DRY modes, so as to
continue operation of the indoor fan for
several minutes after the power is
turned off (so as to remove excess
moisture from the indoor coil). The
icon will be displayed.
Default setting is X-FAN ‘OFF’, and is
not available in AUTO, FAN or HEAT
modes.
X-FAN

SBHVD1S Series Inverter Cassette8
OPERATION cont.
TURBO
LIGHT
SLEEP
When the unit is first turned on in
COOL or HEAT modes, press TURBO
to quickly reach the SET temperature.
TURBO symbol will be shown on
the remote controller display. TURBO
mode is cancelled if MODE or FAN
speed is changed.
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL, HEAT or DRY modes,
press the SLEEP button to start up the
sleep function.
The icon is displayed on the
remote controller. Default setting is
SLEEP mode ‘OFF’.
In COOL and DRY modes, after
running for one hour, the main unit
SET temperature will increase by 1°C,
then after 2 hours will increase by 2°C,
then will continue to run at this
temperature.
In HEAT mode, the SET temperature
will decrease by 1°C and then 2°C for
the first 2 hours, and then stay
constant.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ‘+’ or ‘-’ buttons
simultaneously to lock (or unlock) the
remote controller. The icon will
be displayed, and will flicker when a
button is pressed.
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ‘-’ buttons simultaneously.
FAHRENHEIT / CENTIGRADE
OPERATION cont.
TURBO
LIGHT
SLEEP
When the unit is first turned on in
COOL or HEAT modes, press TURBO
to quickly reach the SET temperature.
TURBO symbol will be shown on
the remote controller display. TURBO
mode is cancelled if MODE or FAN
speed is changed.
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL, HEAT or DRY modes,
press the SLEEP button to start up the
sleep function.
The icon is displayed on the
remote controller. Default setting is
SLEEP mode ‘OFF’.
In COOL and DRY modes, after
running for one hour, the main unit
SET temperature will increase by 1°C,
then after 2 hours will increase by 2°C,
then will continue to run at this
temperature.
In HEAT mode, the SET temperature
will decrease by 1°C and then 2°C for
the first 2 hours, and then stay
constant.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ‘+’ or ‘-’ buttons
simultaneously to lock (or unlock) the
remote controller. The icon will
be displayed, and will flicker when a
button is pressed.
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ‘-’ buttons simultaneously.
FAHRENHEIT / CENTIGRADE
8SBHVD1S Series Cassette Inverter Unit
OPERATION cont.
TURBO
LIGHT
SLEEP
When the unit is first turned on in
COOL or HEAT modes, press TURBO
to quickly reach the SET temperature.
TURBO symbol will be shown on
the remote controller display. TURBO
mode is cancelled if MODE or FAN
speed is changed.
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL, HEAT or DRY modes,
press the SLEEP button to start up the
sleep function.
The icon is displayed on the
remote controller. Default setting is
SLEEP mode ‘OFF’.
In COOL and DRY modes, after
running for one hour, the main unit
SET temperature will increase by 1°C,
then after 2 hours will increase by 2°C,
then will continue to run at this
temperature.
In HEAT mode, the SET temperature
will decrease by 1°C and then 2°C for
the first 2 hours, and then stay
constant.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ‘+’ or ‘-’ buttons
simultaneously to lock (or unlock) the
remote controller. The icon will
be displayed, and will flicker when a
button is pressed.
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ‘-’ buttons simultaneously.
FAHRENHEIT / CENTIGRADE
8SBHVD1S Series Cassette Inverter Unit
OPERATION cont.
Indoor
display
Error code (example only)
ERROR DISPLAY
Your Cassette air conditioner includes abnormal operation detection hardware
and software. If the unit enters an abnormal state, the temperature indicator on
the fascia display will blink to display a corresponding error code.
Error codes and their meanings are shown below:
AUTO TEST
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Error Description
Compressor high pressure protection
Indoor anti-freeze protection
Compressor low pressure protection, refrigerant lack
protection and refrigerant collecting mode
Compressor high discharge temperature protection
Communication error
Indoor fan motor error
Full water protection
Indoor ambient temperature sensor error
Evaporator temperature sensor error
Condenser temperature sensor error
Outdoor ambient temperature sensor error
Discharge temperature sensor error
Temperature sensor error of wired controller
Outdoor memory chip error
Electric box sensor error
Compressor overload protection
Overloading
IPM protection
DC fan motor error
Error Code
E1
E2
E3
E4
E6
E8
E9
F0
F1
F2
F3
F4
F5
EE
PF
H3
H4
H5
H6

9
SEELEY INTERNATIONAL - OWNER’S MANUAL
OPERATION cont.
TURBO
LIGHT
SLEEP
When the unit is first turned on in
COOL or HEAT modes, press TURBO
to quickly reach the SET temperature.
TURBO symbol will be shown on
the remote controller display. TURBO
mode is cancelled if MODE or FAN
speed is changed.
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL, HEAT or DRY modes,
press the SLEEP button to start up the
sleep function.
The icon is displayed on the
remote controller. Default setting is
SLEEP mode ‘OFF’.
In COOL and DRY modes, after
running for one hour, the main unit
SET temperature will increase by 1°C,
then after 2 hours will increase by 2°C,
then will continue to run at this
temperature.
In HEAT mode, the SET temperature
will decrease by 1°C and then 2°C for
the first 2 hours, and then stay
constant.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ‘+’ or ‘-’ buttons
simultaneously to lock (or unlock) the
remote controller. The icon will
be displayed, and will flicker when a
button is pressed.
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ‘-’ buttons simultaneously.
FAHRENHEIT / CENTIGRADE
OPERATION cont.
TURBO
LIGHT
SLEEP
When the unit is first turned on in
COOL or HEAT modes, press TURBO
to quickly reach the SET temperature.
TURBO symbol will be shown on
the remote controller display. TURBO
mode is cancelled if MODE or FAN
speed is changed.
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL, HEAT or DRY modes,
press the SLEEP button to start up the
sleep function.
The icon is displayed on the
remote controller. Default setting is
SLEEP mode ‘OFF’.
In COOL and DRY modes, after
running for one hour, the main unit
SET temperature will increase by 1°C,
then after 2 hours will increase by 2°C,
then will continue to run at this
temperature.
In HEAT mode, the SET temperature
will decrease by 1°C and then 2°C for
the first 2 hours, and then stay
constant.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ‘+’ or ‘-’ buttons
simultaneously to lock (or unlock) the
remote controller. The icon will
be displayed, and will flicker when a
button is pressed.
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ‘-’ buttons simultaneously.
FAHRENHEIT / CENTIGRADE
8SBHVD1S Series Cassette Inverter Unit
OPERATION cont.
TURBO
LIGHT
SLEEP
When the unit is first turned on in
COOL or HEAT modes, press TURBO
to quickly reach the SET temperature.
TURBO symbol will be shown on
the remote controller display. TURBO
mode is cancelled if MODE or FAN
speed is changed.
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL, HEAT or DRY modes,
press the SLEEP button to start up the
sleep function.
The icon is displayed on the
remote controller. Default setting is
SLEEP mode ‘OFF’.
In COOL and DRY modes, after
running for one hour, the main unit
SET temperature will increase by 1°C,
then after 2 hours will increase by 2°C,
then will continue to run at this
temperature.
In HEAT mode, the SET temperature
will decrease by 1°C and then 2°C for
the first 2 hours, and then stay
constant.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ‘+’ or ‘-’ buttons
simultaneously to lock (or unlock) the
remote controller. The icon will
be displayed, and will flicker when a
button is pressed.
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ‘-’ buttons simultaneously.
FAHRENHEIT / CENTIGRADE
8SBHVD1S Series Cassette Inverter Unit
OPERATION cont.
Indoor
display
Error code (example only)
ERROR DISPLAY
Your Cassette air conditioner includes abnormal operation detection hardware
and software. If the unit enters an abnormal state, the temperature indicator on
the fascia display will blink to display a corresponding error code.
Error codes and their meanings are shown below:
AUTO TEST
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Error Description
Compressor high pressure protection
Indoor anti-freeze protection
Compressor low pressure protection, refrigerant lack
protection and refrigerant collecting mode
Compressor high discharge temperature protection
Communication error
Indoor fan motor error
Full water protection
Indoor ambient temperature sensor error
Evaporator temperature sensor error
Condenser temperature sensor error
Outdoor ambient temperature sensor error
Discharge temperature sensor error
Temperature sensor error of wired controller
Outdoor memory chip error
Electric box sensor error
Compressor overload protection
Overloading
IPM protection
DC fan motor error
Error Code
E1
E2
E3
E4
E6
E8
E9
F0
F1
F2
F3
F4
F5
EE
PF
H3
H4
H5
H6

SBHVD1S Series Inverter Cassette10
Number
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Error Description
Activation failure
Compressor phase sequence protection
Compressor stalling protection
Power protection
Indoor and outdoor mismatch
4-way valve direction changing protection
Drive reset protection
Over-current protection
Communication error between main control and drive
Drive module sensor error
Drive module over temperature protection
Zero passage protection
AC current protection
Drive current error
Sensor connecting protection
Temperature drift protection
Bus low voltage protection
Bus high voltage protection
Charge loop error
Input voltage abnormality
Drive memory chip error
Outdoor unit capacity code error
Drive desynchronizing protection
Pfc protection
Indoor unit capacity code error
Error Code
H7
HC
Lc
Ld
LE
LF
Lp
U7
P0
P5
P6
P7
P8
P9
PA
Pc
Pd
PE
PL
PH
PU
PP
ee
C4
C5
OPERATION cont.
ERROR DISPLAY cont.
MAINTENANCE & SERVICE
SAFETY
AIR FILTER
Always isolate power for the air
conditioner from electricity mains
before cleaning or maintenance.
It is important to check and clean the
air filter as per the Maintenance
Schedule. A dirty air filter will not allow
the correct amount of clean air to pass
through your air conditioner, resulting
in poor performance and increased
running costs. Please follow the below
steps:-
1. Release the central air inlet grille.
a. Screws secure the cover in place.
These are located in one of two
positions (model specific).
- In the corners of the grille
- Under screw covers located on the
panel (pull the two screw covers up to
remove the screws).
Remove the screws and set aside for
reinsertion later.
AIR FILTER cont.
b. Push the fasteners to unlock the
grille from the fascia.
2. Disassemble the grille by pulling
down to 45° angle and unclipping from
the fascia.
3. Remove the filter mesh. Clean the
filter mesh by vacuuming or washing
under running water (no warmer than
45°C). Use a mixture of mild detergent
and water if the filter has grease or oil
buildup. Dry in the shade.
NOTE: always ensure the filter is dry,
and in place prior to operating the air
conditioner.
SEELEY INTERNATIONAL – OWNER’S MANUAL 11
SCREW
MAINTENANCE & SERVICE
SAFETY
AIR FILTER
Always isolate power for the air
conditioner from electricity mains
before cleaning or maintenance.
It is important to check and clean the
air filter as per the Maintenance
Schedule. A dirty air filter will not allow
the correct amount of clean air to pass
through your air conditioner, resulting
in poor performance and increased
running costs. Please follow the below
steps:-
1. Release the central air inlet grille.
a. Screws secure the cover in place.
These are located in one of two
positions (model specific).
- In the corners of the grille
- Under screw covers located on the
panel (pull the two screw covers up to
remove the screws).
Remove the screws and set aside for
reinsertion later.
AIR FILTER cont.
b. Push the fasteners to unlock the
grille from the fascia.
2. Disassemble the grille by pulling
down to 45° angle and unclipping from
the fascia.
3. Remove the filter mesh. Clean the
filter mesh by vacuuming or washing
under running water (no warmer than
45°C). Use a mixture of mild detergent
and water if the filter has grease or oil
buildup. Dry in the shade.
NOTE: always ensure the filter is dry,
and in place prior to operating the air
conditioner.
SCREW

11
SEELEY INTERNATIONAL - OWNER’S MANUAL
Number
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
Error Description
Activation failure
Compressor phase sequence protection
Compressor stalling protection
Power protection
Indoor and outdoor mismatch
4-way valve direction changing protection
Drive reset protection
Over-current protection
Communication error between main control and drive
Drive module sensor error
Drive module over temperature protection
Zero passage protection
AC current protection
Drive current error
Sensor connecting protection
Temperature drift protection
Bus low voltage protection
Bus high voltage protection
Charge loop error
Input voltage abnormality
Drive memory chip error
Outdoor unit capacity code error
Drive desynchronizing protection
Pfc protection
Indoor unit capacity code error
Error Code
H7
HC
Lc
Ld
LE
LF
Lp
U7
P0
P5
P6
P7
P8
P9
PA
Pc
Pd
PE
PL
PH
PU
PP
ee
C4
C5
OPERATION cont.
ERROR DISPLAY cont.
MAINTENANCE & SERVICE
SAFETY
AIR FILTER
Always isolate power for the air
conditioner from electricity mains
before cleaning or maintenance.
It is important to check and clean the
air filter as per the Maintenance
Schedule. A dirty air filter will not allow
the correct amount of clean air to pass
through your air conditioner, resulting
in poor performance and increased
running costs. Please follow the below
steps:-
1. Release the central air inlet grille.
a. Screws secure the cover in place.
These are located in one of two
positions (model specific).
- In the corners of the grille
- Under screw covers located on the
panel (pull the two screw covers up to
remove the screws).
Remove the screws and set aside for
reinsertion later.
AIR FILTER cont.
b. Push the fasteners to unlock the
grille from the fascia.
2. Disassemble the grille by pulling
down to 45° angle and unclipping from
the fascia.
3. Remove the filter mesh. Clean the
filter mesh by vacuuming or washing
under running water (no warmer than
45°C). Use a mixture of mild detergent
and water if the filter has grease or oil
buildup. Dry in the shade.
NOTE: always ensure the filter is dry,
and in place prior to operating the air
conditioner.
SEELEY INTERNATIONAL – OWNER’S MANUAL 11
SCREW
MAINTENANCE & SERVICE
SAFETY
AIR FILTER
Always isolate power for the air
conditioner from electricity mains
before cleaning or maintenance.
It is important to check and clean the
air filter as per the Maintenance
Schedule. A dirty air filter will not allow
the correct amount of clean air to pass
through your air conditioner, resulting
in poor performance and increased
running costs. Please follow the below
steps:-
1. Release the central air inlet grille.
a. Screws secure the cover in place.
These are located in one of two
positions (model specific).
- In the corners of the grille
- Under screw covers located on the
panel (pull the two screw covers up to
remove the screws).
Remove the screws and set aside for
reinsertion later.
AIR FILTER cont.
b. Push the fasteners to unlock the
grille from the fascia.
2. Disassemble the grille by pulling
down to 45° angle and unclipping from
the fascia.
3. Remove the filter mesh. Clean the
filter mesh by vacuuming or washing
under running water (no warmer than
45°C). Use a mixture of mild detergent
and water if the filter has grease or oil
buildup. Dry in the shade.
NOTE: always ensure the filter is dry,
and in place prior to operating the air
conditioner.
SCREW

SBHVD1S Series Inverter Cassette12
MAINTENANCE & SERVICE cont.
INDOOR UNIT (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
12
MAINTENANCE & SERVICE cont.
INDOOR COIL (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
SBHVD1S Series Cassette Inverter Unit
12
MAINTENANCE & SERVICE cont.
INDOOR COIL (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
SBHVD1S Series Cassette Inverter Unit
12
MAINTENANCE & SERVICE cont.
INDOOR COIL (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
SBHVD1S Series Cassette Inverter Unit
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassettel Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:
SEELEY INTERNATIONAL – OWNER’S MANUAL 13
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassettel Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:
SEELEY INTERNATIONAL – OWNER’S MANUAL 13
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassettel Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:
SEELEY INTERNATIONAL – OWNER’S MANUAL 13
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassette Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:

13
SEELEY INTERNATIONAL - OWNER’S MANUAL
MAINTENANCE & SERVICE cont.
INDOOR UNIT (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
12
MAINTENANCE & SERVICE cont.
INDOOR COIL (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
SBHVD1S Series Cassette Inverter Unit
12
MAINTENANCE & SERVICE cont.
INDOOR COIL (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
SBHVD1S Series Cassette Inverter Unit
12
MAINTENANCE & SERVICE cont.
INDOOR COIL (REFER PAGE 2)
OUTDOOR UNIT
REFRIGERANT
PLEASE REFER TO THE NEXT
PAGE FOR THE MAINTENANCE
SCHEDULE
Ensure drain connections are checked
on an annual basis (as set out in the
Maintenance Schedule below). Drains
can become blocked by all types of
insects, and rats have been known to
chew through the drain to get to the
water in the pipe.
The Outdoor unit has either one or two
fans, it draws air through the appliance
to expel the heat generated during the
cooling cycle. We recommend
checking that plants haven't grown into
or around the air intake or outlet, along
with other debris that may build up
over time, namely, leaves and the like.
A lack of refrigerant, due to a leak, will
cause the compressor to overheat and
expire prematurely. You will notice a
decline in cooling effect and an
increase in power consumption.
Therefore, having a qualified, licensed
technician service your air conditioner
will save you money in the long term.
(REFER PAGE 2)
SBHVD1S Series Cassette Inverter Unit
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassettel Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:
SEELEY INTERNATIONAL – OWNER’S MANUAL 13
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassettel Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:
SEELEY INTERNATIONAL – OWNER’S MANUAL 13
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassettel Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:
SEELEY INTERNATIONAL – OWNER’S MANUAL 13
MAINTENANCE SCHEDULE
Installation Date:
Items to be done by the (please sign in the places indicated)Home Owner/User
Monthly Annually Year 1 Year 2 Year 3 Year 4 Year 5
Air filter cleaning
Air filter replacement
Maintain required clearance
around Outdoor unit
Items to be done by a
(Home owner/user must ensure that the technician signs and dates in the places indicated)
Qualified Licensed Technician
Check, clean or replace filter
Check drain from indoor coil
Check Outdoor unit clearances – maintain garden and debris
Check refrigerant charge
Check refrigeration connections for soundness
Check outdoor fans
Check electrical connections
Check overall installation
Report to the home owner/user all tasks that require attention
Please NOTE: the Maintenance Schedule covers Year 1 to Year 5. To preserve your
investment for many years afterwards, we strongly recommend that you continue to
maintain and service the Braemar Cassette Inverter Air Conditioning Unit as per the items
and frequency set out in the Schedule, and as indicated elsewhere in this Manual.
Year 1 – Date:
Year 2 – Date:
Year 3 – Date:
Year 4 – Date:
Year 5 – Date:
Annually
/ /
/ /
/ /
/ /
/ /
/ /
Installer:
Technician:
Technician:
Technician:
Technician:
Technician:

SBHVD1S Series Inverter Cassette14
OPERATION TIPS
The following events may occur during normal operation:
Compressor protection
• The compressor cannot restart for 3 minutes after it stops.
The supply air drops below a pre-determined set point; this prevents
the indoor coil from freezing.
A white mist may generate due to a large temperature difference
between air inlet and air outlet on COOL mode in an indoor
environment that has a high relative humidity.
You may hear a low hissing sound when the compressor is running or
has just stopped running.
This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low “squeak” sound when the compressor is
running or has just stopped running.
This is caused by heat expansion and cold contraction of the plastic parts
in the Unit when the temperature is changing.
This is a normal condition when the air conditioner has not been used for a
long time or during first use of the Unit.
This is caused by the Indoor unit giving off smells permeated from building
material, from furniture or smoke (for example if someone is cooking food).
When indoor air temperature reaches the setting on the remote controller, the
compressor will stop operating and after approximately 60 seconds the indoor
fan will stop blowing air. When the room temperature rises back to the set
point, the indoor fan and the compressor will start again.
1. Protection of the air conditioner.
2. A white mist coming out from the Indoor unit.
3. Low noise of the air conditioner.
4. Dust is blown out from the Indoor unit.
5. A peculiar smell comes out from the Indoor unit.
6. FAN operation during COOL mode.
•
•
•
•
14
OPERATION TIPS
The following events may occur during normal operation:
Compressor protection
• The compressor cannot restart for 3 minutes after it stops.
The supply air drops below a pre-determined set point; this prevents
the indoor coil from freezing.
A white mist may generate due to a large temperature difference
between air inlet and air outlet on COOL mode in an indoor
environment that has a high relative humidity.
You may hear a low hissing sound when the compressor is running or
has just stopped running.
This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low “squeak” sound when the compressor is
running or has just stopped running.
This is caused by heat expansion and cold contraction of the plastic parts
in the Unit when the temperature is changing.
This is a normal condition when the air conditioner has not been used for a
long time or during first use of the Unit.
This is caused by the Indoor unit giving off smells permeated from building
material, from furniture or smoke (for example if someone is cooking food).
When indoor air temperature reaches the setting on the remote controller, the
compressor will stop operating and after approximately 60 seconds the indoor
fan will stop blowing air. When the room temperature rises back to the set
point, the indoor fan and the compressor will start again.
1. Protection of the air conditioner.
2. A white mist coming out from the Indoor unit.
3. Low noise of the air conditioner.
4. Dust is blown out from the Indoor unit.
5. A peculiar smell comes out from the Indoor unit.
6. FAN operation during COOL mode.
•
•
•
•
SBHVD1S Series Cassette Inverter Unit

15
SEELEY INTERNATIONAL - OWNER’S MANUAL
OPERATION TIPS
The following events may occur during normal operation:
Compressor protection
• The compressor cannot restart for 3 minutes after it stops.
The supply air drops below a pre-determined set point; this prevents
the indoor coil from freezing.
A white mist may generate due to a large temperature difference
between air inlet and air outlet on COOL mode in an indoor
environment that has a high relative humidity.
You may hear a low hissing sound when the compressor is running or
has just stopped running.
This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low “squeak” sound when the compressor is
running or has just stopped running.
This is caused by heat expansion and cold contraction of the plastic parts
in the Unit when the temperature is changing.
This is a normal condition when the air conditioner has not been used for a
long time or during first use of the Unit.
This is caused by the Indoor unit giving off smells permeated from building
material, from furniture or smoke (for example if someone is cooking food).
When indoor air temperature reaches the setting on the remote controller, the
compressor will stop operating and after approximately 60 seconds the indoor
fan will stop blowing air. When the room temperature rises back to the set
point, the indoor fan and the compressor will start again.
1. Protection of the air conditioner.
2. A white mist coming out from the Indoor unit.
3. Low noise of the air conditioner.
4. Dust is blown out from the Indoor unit.
5. A peculiar smell comes out from the Indoor unit.
6. FAN operation during COOL mode.
•
•
•
•
14
OPERATION TIPS
The following events may occur during normal operation:
Compressor protection
• The compressor cannot restart for 3 minutes after it stops.
The supply air drops below a pre-determined set point; this prevents
the indoor coil from freezing.
A white mist may generate due to a large temperature difference
between air inlet and air outlet on COOL mode in an indoor
environment that has a high relative humidity.
You may hear a low hissing sound when the compressor is running or
has just stopped running.
This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low “squeak” sound when the compressor is
running or has just stopped running.
This is caused by heat expansion and cold contraction of the plastic parts
in the Unit when the temperature is changing.
This is a normal condition when the air conditioner has not been used for a
long time or during first use of the Unit.
This is caused by the Indoor unit giving off smells permeated from building
material, from furniture or smoke (for example if someone is cooking food).
When indoor air temperature reaches the setting on the remote controller, the
compressor will stop operating and after approximately 60 seconds the indoor
fan will stop blowing air. When the room temperature rises back to the set
point, the indoor fan and the compressor will start again.
1. Protection of the air conditioner.
2. A white mist coming out from the Indoor unit.
3. Low noise of the air conditioner.
4. Dust is blown out from the Indoor unit.
5. A peculiar smell comes out from the Indoor unit.
6. FAN operation during COOL mode.
•
•
•
•
SBHVD1S Series Cassette Inverter Unit
TROUBLESHOOTING
Problem Probable Cause Remedy
1. The air conditioner
does not run.
2. Remote controller
is not operating the
air conditioner.
3. There is insufficient
cooling.
4. ‘Clicking’ sound is
heard from the air
conditioner.
5. SET temperature
can’t be adjusted.
6. Cooler is not
operating at full
power, or at all
1.1 Power failure.
1.2 Fuse blown or circuit
breaker open.
1.3 Thermostat adjustment
too low (in heating mode)
or too high (in cooling
mode).
2.1 Remote controller is out
of range.
2.2 Poor signal reception.
2.3 No display on remote
controller.
3.1 The room was probably
very hot when you
started the system.
3.2 Air filter is dirty / blocked.
4.1 In heating or cooling
operation any plastic
parts may expand or
shrink due to a sudden
temperature change in
this event, a clicking
sound may occur.
5.1 Unit is operating in AUTO
mode.
5.2 The required SET
temperature is outside of
the allowable range.
6.1 DRED (Demand
Response energy saving)
mode has been activated
by the Electricity
Supplier.
1.1 Wait for power to resume.
1.2 Replace the fuse or reset
the breaker.
1.3 Check thermostat setting.
Is remote in a cold (COOL
mode) or hot (HEAT
mode) location.
2.1 Signal range is 8m.
2.2 Remove obstacles and
electrical interference.
2.3 Check batteries and
replace as needed.
3.1 Wait a while so the Unit
has enough time to cool
the room.
3.2 Clean the filter.
4.1 This is normal.
5.1 Temperature cannot be set
in AUTO mode.
5.2 SET temperature range is
16-30°C
6.1 DRED will stop grid power
demands are reduced
SEELEY INTERNATIONAL – OWNER’S MANUAL 15
TROUBLESHOOTING
Problem Probable Cause Remedy
1. The air conditioner
does not run.
2. Remote controller
is not operating the
air conditioner.
3. There is insufficient
cooling.
4. ‘Clicking’ sound is
heard from the air
conditioner.
5. SET temperature
can’t be adjusted.
6. Cooler is not
operating at full
power, or at all
1.1 Power failure.
1.2 Fuse blown or circuit
breaker open.
1.3 Thermostat adjustment
too low (in heating mode)
or too high (in cooling
mode).
2.1 Remote controller is out
of range.
2.2 Poor signal reception.
2.3 No display on remote
controller.
3.1 The room was probably
very hot when you
started the system.
3.2 Air filter is dirty / blocked.
4.1 In heating or cooling
operation any plastic
parts may expand or
shrink due to a sudden
temperature change in
this event, a clicking
sound may occur.
5.1 Unit is operating in AUTO
mode.
5.2 The required SET
temperature is outside of
the allowable range.
6.1 DRED (Demand
Response energy saving)
mode has been activated
by the Electricity
Supplier.
1.1 Wait for power to resume.
1.2 Replace the fuse or reset
the breaker.
1.3 Check thermostat setting.
Is remote in a cold (COOL
mode) or hot (HEAT
mode) location.
2.1 Signal range is 8m.
2.2 Remove obstacles and
electrical interference.
2.3 Check batteries and
replace as needed.
3.1 Wait a while so the Unit
has enough time to cool
the room.
3.2 Clean the filter.
4.1 This is normal.
5.1 Temperature cannot be set
in AUTO mode.
5.2 SET temperature range is
16-30°C
6.1 DRED will stop grid power
demands are reduced

SBHVD1S Series Inverter Cassette16
WARRANTY & SERVICE
For prompt, efficient service, please follow the above before calling the
appropriate number below.
When calling the Warranty Service number, please ensure you have your model
and serial number available, along with date of purchase, and if possible a
description of the problem.
For Refrigerated Cooling Issues 1300 526 477
16
WARRANTY & SERVICE
For prompt, efficient service, please follow the above before calling the
appropriate number below.
When calling the Warranty Service number, please ensure you have your model
and serial number available, along with date of purchase, and if possible a
description of the problem.
For Refrigerated Cooling Issues 1300 526 477
NOTE:
Seeley International strives for continuous product improvements, therefore specifications are subject
to change without notice. Unit colour may vary slightly from that depicted in this booklet.
Installation and commissioning of this system to the manufacturer's specification, and compliance
with industry standards, and local, state and national regulatory codes, are the responsibility of the
installer.
Information in this booklet was true and correct at the time of publishing. E & OE.
SBHVD1S Series Cassette Inverter Unit
NOTE:
Seeley International strives for continuous product improvements, therefore specifications are subject
to change without notice. Unit colour may vary slightly from that depicted in this booklet.
Installation and commissioning of this system to the manufacturer's specification, and compliance
with industry standards, and local, state and national regulatory codes, are the responsibility of the
installer.
Information in this booklet was true and correct at the time of publishing. E & OE.

17
SEELEY INTERNATIONAL - OWNER’S MANUAL
SEELEY INTERNATIONAL – OWNER’S MANUAL 17
NOTE
NOTE

SBHV07D1S01-C AU 1906
Warranty Service
Refrigerated Cooling 1300 526 477
seeleyinternational.com
It is the policy of Seeley International to introduce continuous
product improvements. Accordingly, specifications are
subject to change without notice. Please consult with your
dealer to confirm the specifications of the model selected.
seeleyinternational.com