SelectBlinds Inside Mount Spring Roller User manual

The roller shade, when mounted should not make contact with the top of the window frame or any other obstruction when
raised and lowered. Position the mounting brackets inside the window frame. The brackets need to be aligned
and level with one another. When the shade is installed it should move freely between the brackets.
Spring Roller-Standard Roll
163L
For Standard roll shades install the slotted bracket on the left side of the
window frame and the bracket with the round hole on the right.
For Reverse roll shades install the slotted bracket on the right and the
bracket with the round hole on the left.
Roller Shades Instructions
Spring Roller (Inside Mount)
*Shades with a large diameter rolls will receive an extended version of this bracket (RR642)
Spring Roller - Standard Roll
RR641 *
Attach the mounting brackets to the wall or
window frame with the locking bracket on the
left . These brackets can be used for ceiling
applications by mounting by rotating the foot of
the brackets to the top.
Spring Roller – Reverse Roll
RR641 *
Attach the mounting brackets to the wall or
window frame with the locking bracket on the
right . These brackets can be used for ceiling
applications by rotating the foot of the brackets to
the top.
Roller Shades Instructions
Spring Roller (Outside Mount)
The roller shade, when mounted should not make contact with the top of the window frame or any other obstruction when
raised and lowered. Position the mounting brackets outside the window frame. The brackets need to be aligned and level
with one another. When the shade is installed it should move freely between the brackets, be sure to allow 1/8” of
additional space between the brackets so the mechanism will rotate freely.

Please Follow These Installation Instructions
Roller Shade Installation Instructions
Continuous Loop Clutch System with Spring Loaded End Plug
Th univ rsal brack ts can b
mount d in thr diff r nt ways
With saf ty in mind w hav
provid d you with a P-Clip to
k p th b ad d chain out of
th r ach of small childr n.
Mount th P-Clip to th sid of
th window fram for insid
mount, or th fram or wall for
outsid mount. Do not apply
t nsion to th chain control.
Th chain should run through
th P-clip fr ly.
09/09
1
2
a
Installing th roll r shad
a. Plac spring load d nd plug sid into th brack t and compr ss until firmly ins rt d into th brack t
3For OB Mounts
a. Slid d corativ nd caps
ov r th brack ts
Covers are not available
for the F7 Brackets (2 ¼” x 3 ¼”)
b. Plac oth r nd of th shad into position on th brack t and adust until th spring load d nd plug sid
CLICKS in plac . Onc you h ar a CLICK, th shad is lock d in plac
Mounting Outsid Fram Mounting Insid Fram C iling Mount
Brack t Part # F5
Ext nsion Brack t Part # F6
A
B
C
1
2
2
11
12
a
a-1
a-2
a
a
"CLICK"
b-1
b-2
To unlock th shad ,
slid plastic stop to
r l as and pull shad
away from brack t
"CLICK"
Spring load d nd plug