Sena 10U User manual

1 2 3 4 5
18.Oct 6
Button Operation
Press for 1 sec Press and Hold
1”
1”
5” 12”
Tapping
Tap Tap Double Tapping
Headset
Power On/Off
Remote Control
1”
Press
+
Volume Adjustment
12”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v2.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Remote Control Pairing
Center Button
(-) Button
(+) Button
1”
Press
1”
Press
1”
Press
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction Button
Power On
Remote Control Headset
Deep Sleep
(+) Button
+
Center
Button
Tap
Center Button
Press
8”
(+) Button Press
10”
(+) Button
(+) Button
(-) Button
Pairing
Tap
Tap
Tap x 11
Note:
You can control the headset
using the Remote Control
only after you pair them
together.
Press
Tap
Tap
(+) Button
(+) Button
(-) Button
(-) Button
(-) Button
10U for Arai Full-face Helmets
Quick Start Guide
Installation
1 2
3 4
5
7
6
Charging
Getting Started
• Red: Charging
• Blue: Fully charged
DC Power Charging &
Firmware Upgrade Port
Speakers
Wired
Microphone
FM Antenna
Microphone connector
(–) Button
(+) Button
Battery
Antenna
Status LED
Remove the plastic tape from the battery slot to begin using the
Remote Control.

1 2 3 4 5
18.Oct 6
Button Operation
Press for 1 sec Press and Hold
1”
1”
5” 12”
Tapping
Tap Tap Double Tapping
Headset
Power On/Off
Remote Control
1”
Press
+
Volume Adjustment
12”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v2.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Remote Control Pairing
Center Button
(-) Button
(+) Button
1”
Press
1”
Press
1”
Press
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction Button
Power On
Remote Control Headset
Deep Sleep
(+) Button
+
Center
Button
Tap
Center Button
Press
8”
(+) Button Press
10”
(+) Button
(+) Button
(-) Button
Pairing
Tap
Tap
Tap x 11
Note:
You can control the headset
using the Remote Control
only after you pair them
together.
Press
Tap
Tap
(+) Button
(+) Button
(-) Button
(-) Button
(-) Button
10U for Arai Full-face Helmets
Quick Start Guide
Installation
1 2
3 4
5
7
6
Charging
Getting Started
• Red: Charging
• Blue: Fully charged
DC Power Charging &
Firmware Upgrade Port
Speakers
Wired
Microphone
FM Antenna
Microphone connector
(–) Button
(+) Button
Battery
Antenna
Status LED
Remove the plastic tape from the battery slot to begin using the
Remote Control.

1 2 3 4 5
18.Oct 6
Button Operation
Press for 1 sec Press and Hold
1”
1”
5” 12”
Tapping
Tap Tap Double Tapping
Headset
Power On/Off
Remote Control
1”
Press
+
Volume Adjustment
12”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v2.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Remote Control Pairing
Center Button
(-) Button
(+) Button
1”
Press
1”
Press
1”
Press
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction Button
Power On
Remote Control Headset
Deep Sleep
(+) Button
+
Center
Button
Tap
Center Button
Press
8”
(+) Button Press
10”
(+) Button
(+) Button
(-) Button
Pairing
Tap
Tap
Tap x 11
Note:
You can control the headset
using the Remote Control
only after you pair them
together.
Press
Tap
Tap
(+) Button
(+) Button
(-) Button
(-) Button
(-) Button
10U for Arai Full-face Helmets
Quick Start Guide
Installation
1 2
3 4
5
7
6
Charging
Getting Started
• Red: Charging
• Blue: Fully charged
DC Power Charging &
Firmware Upgrade Port
Speakers
Wired
Microphone
FM Antenna
Microphone connector
(–) Button
(+) Button
Battery
Antenna
Status LED
Remove the plastic tape from the battery slot to begin using the
Remote Control.

1 2 3 4 5
18.Oct 6
Button Operation
Press for 1 sec Press and Hold
1”
1”
5” 12”
Tapping
Tap Tap Double Tapping
Headset
Power On/Off
Remote Control
1”
Press
+
Volume Adjustment
12”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v2.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Remote Control Pairing
Center Button
(-) Button
(+) Button
1”
Press
1”
Press
1”
Press
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction Button
Power On
Remote Control Headset
Deep Sleep
(+) Button
+
Center
Button
Tap
Center Button
Press
8”
(+) Button Press
10”
(+) Button
(+) Button
(-) Button
Pairing
Tap
Tap
Tap x 11
Note:
You can control the headset
using the Remote Control
only after you pair them
together.
Press
Tap
Tap
(+) Button
(+) Button
(-) Button
(-) Button
(-) Button
10U for Arai Full-face Helmets
Quick Start Guide
Installation
1 2
3 4
5
7
6
Charging
Getting Started
• Red: Charging
• Blue: Fully charged
DC Power Charging &
Firmware Upgrade Port
Speakers
Wired
Microphone
FM Antenna
Microphone connector
(–) Button
(+) Button
Battery
Antenna
Status LED
Remove the plastic tape from the battery slot to begin using the
Remote Control.

1 2 3 4 5
18.Oct 6
Button Operation
Press for 1 sec Press and Hold
1”
1”
5” 12”
Tapping
Tap Tap Double Tapping
Headset
Power On/Off
Remote Control
1”
Press
+
Volume Adjustment
12”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v2.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Remote Control Pairing
Center Button
(-) Button
(+) Button
1”
Press
1”
Press
1”
Press
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction Button
Power On
Remote Control Headset
Deep Sleep
(+) Button
+
Center
Button
Tap
Center Button
Press
8”
(+) Button Press
10”
(+) Button
(+) Button
(-) Button
Pairing
Tap
Tap
Tap x 11
Note:
You can control the headset
using the Remote Control
only after you pair them
together.
Press
Tap
Tap
(+) Button
(+) Button
(-) Button
(-) Button
(-) Button
10U for Arai Full-face Helmets
Quick Start Guide
Installation
1 2
3 4
5
7
6
Charging
Getting Started
• Red: Charging
• Blue: Fully charged
DC Power Charging &
Firmware Upgrade Port
Speakers
Wired
Microphone
FM Antenna
Microphone connector
(–) Button
(+) Button
Battery
Antenna
Status LED
Remove the plastic tape from the battery slot to begin using the
Remote Control.

1 2 3 4 5
18.Oct 6
Button Operation
Press for 1 sec Press and Hold
1”
1”
5” 12”
Tapping
Tap Tap Double Tapping
Headset
Power On/Off
Remote Control
1”
Press
+
Volume Adjustment
12”
Press
Phone, Music Pairing
Select Sena 10U
Device A
Device B
......
Sena 10U v2.0
Bluetooth
l
l
l
l
l
0 0 0 0
PINEnter
Music Operation
Remote Control Pairing
Center Button
(-) Button
(+) Button
1”
Press
1”
Press
1”
Press
Center Button
Battery Slot
(-) Button
(+) Button
Multifunction Button
Power On
Remote Control Headset
Deep Sleep
(+) Button
+
Center
Button
Tap
Center Button
Press
8”
(+) Button Press
10”
(+) Button
(+) Button
(-) Button
Pairing
Tap
Tap
Tap x 11
Note:
You can control the headset
using the Remote Control
only after you pair them
together.
Press
Tap
Tap
(+) Button
(+) Button
(-) Button
(-) Button
(-) Button
10U for Arai Full-face Helmets
Quick Start Guide
Installation
1 2
3 4
5
7
6
Charging
Getting Started
• Red: Charging
• Blue: Fully charged
DC Power Charging &
Firmware Upgrade Port
Speakers
Wired
Microphone
FM Antenna
Microphone connector
(–) Button
(+) Button
Battery
Antenna
Status LED
Remove the plastic tape from the battery slot to begin using the
Remote Control.

7 8 9 10 11 12
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the
Remote Control's battery or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset
by gently pushing the pin-hole reset button located on
the battery.
Intercom Pairing
Headset A Headset B
Pairing
5”
PressCenter Button
Center Button
Center Button Center Button
Center Button
Center Button
Center Button
3”
Press
5”
Press
Center Button
Tap
Intercom Start/End
Tap
1st Friend 2nd Friend
Tap
Double Tap
3rd Friend
Tap
Triple Tap
Radio On/Off
1”
1”
1”
1”
1”
Press
Press
Press
Press
Press
(-) Button
(+) Button
(+) Button
(-) Button
Radio Seek Stations
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to www.sena.com for
more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
10”
PressCenter Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Mobile Phone Call Making and Answering
Reject
Answer
Tap
Center Button
Center Button
Center Button
Center Button
(+) Button
End
Voice Dial
Speed Dial
Press
Press
Press
Press
2”
2”
3”
3”
Tap
Double Tap
or
or
(+) Button
(+) Button
(-) Button
(-) Button
Tap
Center Button
MP0501657_2.0.0_EN_October2018

7 8 9 10 11 12
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the
Remote Control's battery or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset
by gently pushing the pin-hole reset button located on
the battery.
Intercom Pairing
Headset A Headset B
Pairing
5”
PressCenter Button
Center Button
Center Button Center Button
Center Button
Center Button
Center Button
3”
Press
5”
Press
Center Button
Tap
Intercom Start/End
Tap
1st Friend 2nd Friend
Tap
Double Tap
3rd Friend
Tap
Triple Tap
Radio On/Off
1”
1”
1”
1”
1”
Press
Press
Press
Press
Press
(-) Button
(+) Button
(+) Button
(-) Button
Radio Seek Stations
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to www.sena.com for
more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
10”
PressCenter Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Mobile Phone Call Making and Answering
Reject
Answer
Tap
Center Button
Center Button
Center Button
Center Button
(+) Button
End
Voice Dial
Speed Dial
Press
Press
Press
Press
2”
2”
3”
3”
Tap
Double Tap
or
or
(+) Button
(+) Button
(-) Button
(-) Button
Tap
Center Button
MP0501657_2.0.0_EN_October2018

7 8 9 10 11 12
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the
Remote Control's battery or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset
by gently pushing the pin-hole reset button located on
the battery.
Intercom Pairing
Headset A Headset B
Pairing
5”
PressCenter Button
Center Button
Center Button Center Button
Center Button
Center Button
Center Button
3”
Press
5”
Press
Center Button
Tap
Intercom Start/End
Tap
1st Friend 2nd Friend
Tap
Double Tap
3rd Friend
Tap
Triple Tap
Radio On/Off
1”
1”
1”
1”
1”
Press
Press
Press
Press
Press
(-) Button
(+) Button
(+) Button
(-) Button
Radio Seek Stations
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to www.sena.com for
more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
10”
PressCenter Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Mobile Phone Call Making and Answering
Reject
Answer
Tap
Center Button
Center Button
Center Button
Center Button
(+) Button
End
Voice Dial
Speed Dial
Press
Press
Press
Press
2”
2”
3”
3”
Tap
Double Tap
or
or
(+) Button
(+) Button
(-) Button
(-) Button
Tap
Center Button
MP0501657_2.0.0_EN_October2018

7 8 9 10 11 12
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the
Remote Control's battery or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset
by gently pushing the pin-hole reset button located on
the battery.
Intercom Pairing
Headset A Headset B
Pairing
5”
PressCenter Button
Center Button
Center Button Center Button
Center Button
Center Button
Center Button
3”
Press
5”
Press
Center Button
Tap
Intercom Start/End
Tap
1st Friend 2nd Friend
Tap
Double Tap
3rd Friend
Tap
Triple Tap
Radio On/Off
1”
1”
1”
1”
1”
Press
Press
Press
Press
Press
(-) Button
(+) Button
(+) Button
(-) Button
Radio Seek Stations
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to www.sena.com for
more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
10”
PressCenter Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Mobile Phone Call Making and Answering
Reject
Answer
Tap
Center Button
Center Button
Center Button
Center Button
(+) Button
End
Voice Dial
Speed Dial
Press
Press
Press
Press
2”
2”
3”
3”
Tap
Double Tap
or
or
(+) Button
(+) Button
(-) Button
(-) Button
Tap
Center Button
MP0501657_2.0.0_EN_October2018

7 8 9 10 11 12
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the
Remote Control's battery or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset
by gently pushing the pin-hole reset button located on
the battery.
Intercom Pairing
Headset A Headset B
Pairing
5”
PressCenter Button
Center Button
Center Button Center Button
Center Button
Center Button
Center Button
3”
Press
5”
Press
Center Button
Tap
Intercom Start/End
Tap
1st Friend 2nd Friend
Tap
Double Tap
3rd Friend
Tap
Triple Tap
Radio On/Off
1”
1”
1”
1”
1”
Press
Press
Press
Press
Press
(-) Button
(+) Button
(+) Button
(-) Button
Radio Seek Stations
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to www.sena.com for
more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
10”
PressCenter Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Mobile Phone Call Making and Answering
Reject
Answer
Tap
Center Button
Center Button
Center Button
Center Button
(+) Button
End
Voice Dial
Speed Dial
Press
Press
Press
Press
2”
2”
3”
3”
Tap
Double Tap
or
or
(+) Button
(+) Button
(-) Button
(-) Button
Tap
Center Button
MP0501657_2.0.0_EN_October2018

7 8 9 10 11 12
Troubleshooting
Remote Control Disconnection
If the Remote Control becomes disconnected with your headset, replace the
Remote Control's battery or go through the pairing process again. Meanwhile,
you can use the headset control buttons to operate the headset. Please refer
to the User’s Guide at www.sena.com for details on headset control button
operations.
Factory Reset
If you want to restore the 10U to factory default settings, use the Factory
Reset in the conguration menu. The headset automatically restores the
default settings and turns off.
Fault Reset
If the 10U is not working properly for any reason, reset
by gently pushing the pin-hole reset button located on
the battery.
Intercom Pairing
Headset A Headset B
Pairing
5”
PressCenter Button
Center Button
Center Button Center Button
Center Button
Center Button
Center Button
3”
Press
5”
Press
Center Button
Tap
Intercom Start/End
Tap
1st Friend 2nd Friend
Tap
Double Tap
3rd Friend
Tap
Triple Tap
Radio On/Off
1”
1”
1”
1”
1”
Press
Press
Press
Press
Press
(-) Button
(+) Button
(+) Button
(-) Button
Radio Seek Stations
Radio Move to Preset Station
I1I I2I ...I5I... I9I I10I
Radio Scan Up FM Band
Save to preset while scanning
Start
or
Stop
Save
Tap
Radio Save or Delete Preset
or
1 ~ 10, Cancel
Delete
Save
Setting
Configuration Menu
Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, please refer to the
leaet included in the package.
Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android or
iPhone from Google Play or App Store. Please refer to www.sena.com for
more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Setting to congure the headset settings.
10”
PressCenter Button
A full version of the manual is downloadable at
www.sena.com.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
Mobile Phone Call Making and Answering
Reject
Answer
Tap
Center Button
Center Button
Center Button
Center Button
(+) Button
End
Voice Dial
Speed Dial
Press
Press
Press
Press
2”
2”
3”
3”
Tap
Double Tap
or
or
(+) Button
(+) Button
(-) Button
(-) Button
Tap
Center Button
MP0501657_2.0.0_EN_October2018