Sencor SSS 6800 TE User manual

SSS 6800 TE
EN User Manual Bluetooth speaker
CZ Uživatelská příručka Bluetooth reproduktor
SK Používateľská príručka Bluetooth reproduktor
HU Felhasználói kézikönyv Bluetooth hangszóró
PL Podręcznik użytkownika Głośnik Bluetooth

EN
2 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Table of Contents
Safety Instructions.................................................................................. 3
Supply content ........................................................................................6
Description of the BT speaker.............................................................6
Putting into operation.............................................................................7
Charging....................................................................................................8
LED indicators..........................................................................................9
Pairing devices via Bluetooth..............................................................9
TWS function..........................................................................................10
Power bank feature................................................................................11
Audio AUX-IN ........................................................................................12
Play/Pause button.................................................................................12
Volume and track playback control...................................................13
Tlačítko reset...........................................................................................13
Ingression protection (IPX6)................................................................14
Technical specifications........................................................................15
INSTRUCTIONS AND INFORMATION ABOUT
THE DISPOSAL OF DISCARDED PACKAGE .................................. 17
DISPOSAL OF DISCARDED ELECTRICAL
AND ELECTRONIC EQUIPMENT...................................................... 17

EN
EN 3
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Safety Instructions
This product has been designed with the utmost safety in mind.
However, incorrect use may lead to electric shock or fire. This
is why users should observe the following instructions when
using this device.
This device uses asemiconductor unit and contains no user
serviceable parts. Do not disassemble this device, otherwise you
are exposed to the risk of electric shock. If any damage to this
product occurs, please have this product repaired by aqualified
service technician.
Power source
Power supply of this unit must be match the serial plate data.
Heat source
Keep this unit out of heat sources like stove or direct sunlight.
Cleaning
Prior to cleaning, please disconnect power first. For cleaning,
don’t use liquid detergents or caustic liquids - just clean the unit
with asoft cloth.
Heavy objects
Do not place heavy objects on the unit, otherwise damage
might occur.

EN
4 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Connecting other devices
Before connecting other devices to this unit, please make sure
to disconnect power. Otherwise damage to the unit or personal
injury might occur.
Faults to be repaired
If any of the following problems occurs, please disconnect
power to the unit and contact aqualified service technician.
A. Power cord or plug is damaged.
B. Liquids or other foreign objects have penetrated inside the
product.
C. If the unit does not work even if it’sbeing operated
according to the instructions, don’t press any buttons
other than those described in these instructions.
Otherwise, damage to this unit may occur along with
amore demanding repair.
D. This unit has fallen on the ground from abig height.
E. Burns can be smelled from the product inside.
Maintenance
If you don’t have enough technical knowledge necessary to
maintain this unit, don’t attempt to repair it by yourself. By
removing cover, you are exposed to arisk of electric shock. If
needed, please contact aqualified service technician.
Replacement of parts
If you need to replace any part of this unit, ask your service
technician to make areplacement for equal spare part models.
If other spare part models are used for replacement, serious
damage, electric shock or shortening the unit’slifetime may occur.

EN
EN 5
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Safety check
When done with the maintenance, ask your service technician
to perform an on-site safety check to make sure that the
unit’soperation is safe.
Note:
Before using this product, read these instructions carefully
and keep it well for future use.

EN
6 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Supply content
Supplied package contents:
 BT speaker
 Audio jack 3.5 mm connection cable
 USB-C charging cable
 Detachable strap
 User’smanual
Description of the BT speaker
1 2 3 4
5 6 7
89
0 qa

EN
EN 7
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
1Power on/off button
Battery charging status display
Source switching (Bluetooth/AUX-IN)
2„-“/Volume down/previous track button
3“Play/Pause” button
Call answer/reject/hang up/redial
Indoor/outdoor mode change
4„+“/Volume up/next track button
5Bluetooth connection LED indicator
6Battery charging level LED indicator
7Microphone
8Reset button
9Charging socket (USB-C)
0USB port
qa AUX-IN mini jack (3.5mm) socket
Putting into operation
Before first use, be sure to read the safety instructions contained
in this user'smanual carefully.
Before first use, please charge the BT speaker to amaximum
level. Hold down the power On button to turn on the BT
speaker. Turning on/off is indicated by asound signal. To turn
the BT speaker off, hold down the power On button.
Caution:
After alonger period of inactivity, the appliance will
turns itself off.

EN
8 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Charging
Acharged battery provides power for several hours of operation
at normal volume levels. Ahigh volume consumes more battery
power; therefore, we recommend listening at normal volume
levels. To charge the BT speaker, please connect the charging
adapter to the mains and then to the BT speaker.
Caution:
For charging, use only the original accessories
supplied with the appliance. To achieve the maximum
battery lifetime, it is best to start charging the
battery after the low battery power notification by
the LED indicator. Charge continuously until fully
charged. If the battery operation time becomes very
short, the battery lifetime has come to an end and
we recommend to have the battery replaced in an
authorized service.
Recommendation:
If the unit is not to be used for an extended period of time,
we recommend to fully charge the battery once every two
to three months. We recommend to store the unit with
athe battery charged to prevent irreparable damage to the
battery (loss of capacity).

EN
EN 9
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
LED indicators
The Bluetooth connection LED indicator shows the following
speaker conditions:
 Flashing blue - The device is ready to be paired via
Bluetooth, no audio source is connected
 Solid blue – The BT speaker is paired to another device
via Bluetooth
 Solid green – Audio jack is connected to the device
The battery level LED indicator shows the following conditions
while the charging is in progress:
 Red indication – The device is discharged (<10% battery
level)
 Single white LED – The battery is charged to30%
 Two white LEDs – The battery is charged to30–70%
 Three white LEDs – The battery is charged to 70–100%
(the ongoing charging is indicated by flashing LED, the
LEDs will light steadily when the charging is finished)
Note:
To check the charging level while the BT speaker is
powered off, press the Power on button shortly.
Pairing devices via Bluetooth
Turn on the BT speaker and search for its Bluetooth name
"SSS 6800 TE" in the device to which you wish to pair and
start the pairing process. If you are requested to enter apairing
code while your device and the BT speaker are pairing, use the
code: “0000”. To disconnect apaired device, press “+“ (volume
up) and “-” (volume down) buttons simultaneously, until the

EN
10 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
LED indication on the device has changed. The BT speaker
remembers the last 8 paired units to which it will connect upon
powering up.
Note:
To ensure astable Bluetooth connection, make sure that
the distance between the BT speaker and your connected
device is kept within 15m. If an AUX-IN cable is connected
to the BT speaker, please select the Bluetooth playback
mode by pressing the Power on button.
Caution:
Some connected devices support common volume
setting. If some of the connected devices do not
support this feature, the volume setting will operate
separately on each device.
TWS function
If you buy another Bluetooth speaker („SSS 6800 TE“), you
can pair both speakers together for optimum stereo sound. First,
make sure your device is not connected to any BT speaker.
Place the BT speakers near each other (no more than 15m
apart) and turn them on. Press the Power on button on one
of the BT speakers twice to select the master BT speaker
(left channel) and wait until the speakers pair to each other
automatically. The blue-green indicator stops flashing and
once the BT speakers are paired, the master BT speaker (left
channel) will be marked by slowly flashing blue indication.
Use the volume control buttons to change the level

EN
EN 11
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
automatically on both paired BT speakers. Pressing and holding
down the volume control buttons ( “+” and“-”) simultaneously
on one of the BT speakers will interrupt the TWS connection.
Note:
If the BT speakers fail to be paired successfully to transfer
stereo sound, turn all engaged units off and then on again.
Caution:
The TWS function is only available in the Bluetooth
mode. It is not possible to pair the device with
another type of BT speaker with TWS function,
even within re-editions of products with a different
Bluetooth name. The TWS on the SSS 6800 TE is not
compatible with the SSS 6800 and SSS 6800 SE.
Power bank feature
The BT speaker can be used as apower bank to charge
other portable devices. Lift the protective cover of the BT
speaker’srear jacks and connect your portable device’scharging
cable to the USB port. The charging is performed automatically
while the BT speaker is turned on. To enable the Power bank
feature in adischarged BT speaker, press the Power on button
shortly.

EN
12 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Audio AUX-IN
The BT speaker is equipped with a3.5mm jack. Your device
can be connected to the BT speaker via the supplied audio
cable. First connect the audio plug to your device and then to
the BT speaker’sjack.
Caution:
Before connecting your device to the BT speaker, please
make sure that the output signal from your device is
set to its minimum (minimum output volume). This will
prevent the BT speaker from damage. When the BT
audio cable is connected, the speaker does not meet
the IPX6 protection class and in not water-resistant.
Note:
In this mode, not all functions of the BT speaker are
available. The Bluetooth feature is not automatically
enabled if an audio jack is connected to the BT speaker.
Play/Pause button
 Press the Play/Pause button to start or pause music
playback during the Bluetooth connection.
 An incoming call to apaired device connected via
Bluetooth will be accompanied by an acoustic signal,
interrupting the music playback. To answer/hang up an
incoming call, press the Play/Pause button briefly. To
reject incoming call, long press and hold the button. Press
and hold down the button to redial the last number (the
call will be made via the connected device).

EN
EN 13
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
 Press the Play/Pause button shortly twice to switch
between Indoor andOutdoor playback modes.
Note:
The reception of the BT speaker’smicrophone may be
attenuated due to the device’swater resistance. To improve
the reception, please speak loud and in the vicinity of the
BT speaker.
Volume and track playback control
To control the BT speaker’svolume (+/-), use the buttons on
the BT speaker. During music playback, you can press and hold
the “+” button to jump to the next track playback. To select the
previous track, press and hold the “-” button.
Reset button
To reset the BT speaker, use a blunt, non-metallic object with
a diameter of 3 mm and carefully insert it into the AUX-IN
connector. Gently press into the connector until you feel the
click of the button located behind the AUX-IN connector. Then
switch on the BT speaker using the power button.
TIP:
If there is an unexpected problem with the BT speaker
connection or function, reset the BT speaker.

EN
14 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Ingression protection (IPX6)
The unit has an increased water protection class. The IPX6
protection class will protect the device against jets of water.
Caution:
Remember to always seal the BT speaker’sinputs
(No. 8–11 on “BT speaker description“ figure) with the
original sealing plug and make sure that the plug is
not damaged. Never charge the unit during possible
contact with fluids. The unit is designed for contact
with clean water only without any additives. Avoid
exposing the unit to contaminated or industrially
treated fluids (such as lemonade, sea/salt water,
oils, etc.).

EN
EN 15
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Technical specifications
Features
Waterproof Speaker with IPX6 Protection
Premium Fabric Speaker Cover
TWS Function (True Wireless Stereo)
LED Status Indicator (Connection/Battery Status)
Powerbank Function
Sound
Maximum Speaker Power 60W
Total Power Output (RMS) 50W
4 Speakers (2 Bass & Mid-Range, 2 Tweeters)
+ 2 Passive Radiators
Digital Sound Processor DSP
Frequency Response: 40Hz - 16KHz
Total Harmonic Distortion: ≤1%
Inputs
Bluetooth Audio 5.3
Connection Distance up to 15m
Audio Aux Input (3.5mm stereo Jack)
Others
Textile Strap for Easy Handle
Handsfree Function
Built-in Rechargeable Battery: 10 000mAh Li-Ion
Playback Time up to 13 Hours (50% Volume)
USB-C Charging
Charging Time max 6 Hours
Accessories: USB Charging Cable, 3.5mm Aux Cable,
Textil Strap, User Manual
Dimension: 320 x 134 x 134mm
Weight: 2 600g

EN
16 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
Bluetooth Version 5.3
Maximum Transmitter
Power
100mW @ 2.4GHz -
2.4835GHz
Codec SBC
Profiles HFP V1.5;A2DP
V1.2;AVRCP
V1.4,GAVDP
V1.2;AVDTP V1.2;SPP
V1.2;AVCTP V1.2

EN
EN 17
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
INSTRUCTIONS AND INFORMATION ABOUT
THE DISPOSAL OF DISCARDED PACKAGE
Return the packaging to acollection centre for disposal.
DISPOSAL OF DISCARDED ELECTRICAL AND
ELECTRONIC EQUIPMENT
This symbol placed on the product, accessories or
package notifies that the product must not be treated
as household waste. Please dispose of this product
in acollection centre designed for recycling electric
and electronic equipment. In some EU or European
countries, you can return your products to your local
dealer when buying anew equivalent product. Proper
disposal of this product helps save valuable natural
resources and prevents possible adverse impacts on the
environment and human health that might be caused
by improper waste disposal. For further information,
please contact your local authorities or the nearest
waste disposal collection centre. Wrong disposal of this
type of waste may be subject to alegal penalty.
For EU companies
If you need to dispose of an electric or electronic device, ask
your dealer oor supplier for necessary information.
Disposal in countries outside the European Union
To dispose of this product, please ask the ministry or your
dealer for the necessary information on correct disposal.
The product meets the respective EU requirements.

EN
18 EN
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
FAST ČR, a.s. hereby declares that the radio equipment type
SSS 6800 TE conforms to the 2014/53/EU Directive.
For full version of the EU declaration of conformity, please refer
to www.sencor.eu website.
Changes in the text, design and technical specifications may
be made without prior notice and we reserve the right to make
such changes.
The original version is in Czech.
Address of the manufacturer:
FAST ČR, a.s., U Sanitasu 1621, Říčany CZ-251 01

EN
EN 19
Copyright © 2022, Fast ČR, a. s. Revision 03/2022
EN Warranty conditions
Warranty card is not apart of the device packaging.
This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited
to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The
claim for service can be applied either at dealer’sshop where the product was bought, or at below mentioned
authorized service shops. The end-user is obligated to set up aclaim immediately when the defects appeared but
only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only
completed and clean (according to hygienic standards) product will be accepted. In case of eligible warranty claim
the warranty period will be prolonged by the period from the date of claim application till the date of taking over
the product by end-user, or the date the end-user is obligated to take it over. To obtain the service under this
warranty, end-user is obligated to certify his claim with duly completed following documents: receipt, certificate of
warranty, certificate of installation.
This warranty is void especially if apply as follows:
Defects which were put on sale.
Wear-out or damage caused by common use.
The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction
manual, used in contrary to legal enactment and common process of use or used for another purpose which
has been designed for.
The product was damaged by uncared-for or insufficient maintenance.
The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).
Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
The product was mechanically damaged (e.g. broken button, fall).
Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable working
conditions (e.g. high temperatures, high humidity, quakes).
Repair, modification or other failure action to the product by unauthorized person.
End-user did not prove enough his right to claim (time and place of purchase).
Data on presented documents differs from data on products.
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial
number or the warranty seal has been damaged).
Authorized service centers
Visit www.sencor. for detailed information about authorized service centers.com