Sengled Smart User manual

USER GUIDE
• Soft White A19 Bulbs
• Daylight A19 Bulbs
• Extra Bright Soft White A19 Bulbs
• Extra Bright Daylight A19 Bulbs
• Soft White BR30 Bulbs
• Multicolor A19 Bulbs
• Multicolor BR30 Bulbs
• Multicolor B11 Candle Bulb
• Vintage Edison ST19 Bulb
Sengled Smart LED

Introduction:
Sengled Smart LED bulbs oer an easy solution to having
app-controllable smart lighting in your home. These bulbs
enable you to control your lights in multiple ways—on/o,
dimming, schedules, etc.— through the Sengled Home app
on your phones or through partner programs like Amazon
Alexa, Google Assistant or Apple HomeKit (Sengled smart
hub E39-G8C required).
Note: A hub is required to control these bulbs.
Important Safety Information:
Before installing the Sengled Smart LED bulbs,
please read and follow all precautions, including:
• Turn o power before installation or removal. Discontinue
use if damaged.
• Warning: risk of electric shock. Do not attempt to
disassemble bulb.
• Not suitable for use with wall dimmers.
• Suitable for use in operating environment between
-4°F and 104°F (-20°C and 40°C).
• Not for use in emergency lighting.
• Indoor use only.
Wireless Specification:
Wireless Frequency Range:
2.4GHz (2405MHz~2480MHz, IEEE 802.15.4)
Operating channels Zigbee: 11-26
Maximum Transmitted Output Power: 9.98dBm
1

Installation Instructions:
The following instructions are applicable to adding your
Smart LED bulb to a Sengled Smart Hub. If you DO NOT
have Sengled Smart Hub and Sengled Home app
previously installed, please install your hub according to
its user guide in the package before installing bulbs.
If you have third-party hubs, such as SmartThings or
Amazon Echo Plus, you also can connect Sengled Smart
bulbs to these hubs according to their instructions in
apps. If you would like to find our latest list of supported
third party hubs, please refer to support.sengled.com.
Note: Please ensure your mobile device is connected to
the same wireless router that your Sengled smart hub is
connected with using 2.4G Hz.
1Open the Sengled Home app.
Go to Devices, select the + sign,
and choose Smart LED Lights
(from Zigbee Devices Hub Required).
Follow in-app instructions to finish installation.
2Ensure your Sengled Home app can discover the
bulbs. If the app could not discover the bulbs,
please use "Add Device Manually" option (QR
code scan method). If it still doesn't work, please
refer to the next section "Reset Instructions" for
how to reset your bulb before attempting to add it
back in.
Congratulations on successfully set up your smart
bulbs!
Reset Instructions:
To reset your Smart LED bulb, ensure that the bulb is on
and then quickly turn the bulb o and on at least 10
times (using a light switch or power bar works best). If
the reset is successful, the bulb will flash five times. If it
does not flash five times, you will have to try again.
Once successfully reset, please try to pair it in your
Sengled Home app again.
2

Operation:
The following section outlines some of the popular
operational modes of the Sengled Smart LED bulbs.
Applicable to all smart LED bulbs:
On / O
Smart LED bulbs can be controlled through a variety
of means:
• Manually via a wall switch
• Through Sengled Home app (including Widget)
• Through partner programs like Alexa,
Google Assistant, HomeKit, etc.
• Through Sengled Smart Light Switch
Dimming
Smart LED bulbs can be dimmed through the
following:
• Through Sengled Home app (including Widget)
• Through partner programs like Alexa,
Google Assistant, HomeKit, etc.
• Through Sengled Smart Light Switch
Note: Manual dimming via wall dimmers is not
supported.
Scheduling
Schedules can be created with Sengled Home app.
Check the in-app how-to pages through "Settings" for
the following two operations.
Third-Party Voice Control
• Set up Amazon Alexa by adding
Sengled Home Skill.
• Set up Google Assistant by adding
Sengled Home Service.
• Setup Apple HomeKit by “Add Accessory" from
iOS Home app. (Sengled smart hub E39-G8C
required)
A
B
C
D
3

If you have Sengled Smart LED Multicolor bulbs, the
following operations are also available:
Tuning Whites
Adjust whites via the white palette in the Sengled
Home app, or with voice control.
Changing Colors
Change between 16 million colors using the color
palette in the Sengled Home app, or with voice
control.
Frequently Asked Questions:
1. Are Sengled Smart LEDs suitable for use with wall
dimmers?
No, Sengled Smart LEDs are not suitable for use with
wall dimmers, or other variable power devices.
Dimming is supported via Sengled Home app or
compatible smart devices only.
2. Sengled Smart LED bulbs appear oline or
unresponsive, what should I do?
a) Please check the light switch and make sure that
it’s switched On.
b) Refresh the status of your Sengled Home app,
navigate to the Home tab, swipe down and then
release.
c) Check the status of your smart hub; make sure the
LED indicator lights are on properly. If the Power
LED is o, please check the power adapter; If
the network LED (Model: Z02-Hub)
or (Model: E39-G8C) is o, please check your
internet connection; If the Ethernet LED is o,
please check the Ethernet cable connection.
F
E
4

3. Can dierent types of Sengled smart devices be
used simultaneously?
Yes, a single Sengled hub can support up to 64
Sengled smart devices, including smart LED bulbs,
smart plugs, smart sensors, smart light switch, etc.
For the latest selection, please check out
Sengled.com.
Limited Warranty:
3-year limited warranty from original purchase date.
Sengled restrict warranty service for smart home device
to the country where Sengled or its authorized retailor
originally sold the device. To learn more about the
Limited Warranty for Sengled products, please visit
www.sengled.com/warranty.
Support:
If you encounter any issues, please reach out to your
local Sengled Support team.
Visit the following website for web support:
https://support.sengled.com/
Send emails to:
Suppor[email protected].com (USA)
SengledCanada@sengled.zendesk.com (CA)
Dial Customer Support Line 1-877-401-5990
10:00am-8:00 pm CST on Mon-Fri
11:00am-8:00 pm CST on Sat
1503260357/v3.0
5

FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator& your body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation et mise en œuvre de ce
matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette
antenne ou capteurs avec d’autres.
Table of contents
Other Sengled Lighting Equipment manuals

Sengled
Sengled ZM005 User manual

Sengled
Sengled W1G-N83W3 User manual

Sengled
Sengled smartsense 0058693001 User manual

Sengled
Sengled B11-U21W User manual

Sengled
Sengled Snap Crystal N1E-EE6 User manual

Sengled
Sengled 0059693040 User manual

Sengled
Sengled element Z01-hub User manual

Sengled
Sengled Soft White A19 Bulbs User manual

Sengled
Sengled W1G-N84 User manual