Sennheiser TeamConnect Ceiling Mic M User guide

Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Printed in Germany, Publ. 04/23, 597211/A02
TeamConnect
Ceiling Mic M
TCC M
Mounting instruction
Montageanleitung
Notice de montage
Istruzioni di montaggio
Instrucciones de montaje
Instruções de montagem
Montagehandleiding
Instrukcja montażu
Monteringsanvisning
Monteringsvejledning
Asennusohje
Οδηγίες συναρμολόγησης
Montaj kılavuzu
Инструкция по монтажу
安装指南
組立説明書
조립 지침
Sennheiser Documentation App
or online at
www.sennheiser.com/download
TCCM_
Flush MountedInterfaces
Swappable logo plateMicrophone alignment
ø 390 mm
ANALOGOUTPOE OUT STAT.RESE T POE IN/CTRL
POE
*push*
*push*
ANALOGOUTPOE OUT STAT.RESET POE IN/C TRL
POE
3x
*unfold* *push*
Align with camera control.
Check 0˚ mark before fastening!
4. Pull ropes to tension.
1. Attach safety ropes.
ø 15.35"
1Analog OUT
3Daisy Chain Status
5Reset
2PoE Out / Dante II
4PoE Staus
1 2
3
4 5 6
6PoE IN / CTRL /
Dante I
hard ceiling
suspended
ceiling
0˚
Use drilling template Art. no. 594561!
Use drilling template
Art. no. 594561!
Lefthand drive!
3x
ANALOGOUTPOE OUT STAT.RESE T POE IN/CTRL
POE
optional
cover
Attach safety rope and suspension ropes!
Follow mounting steps in chapter “Suspended”.
Attach pipe clamps if
needed (not included). 5. Fasten microphone.
Analog OUT
Reset
PoE IN/CtrlPoE OUT
+-
Plug and eyebolt
are not included.
2. Connect cable(s).
Cut o
overhanging rope!
3.
1. 2.
3. Lift microphone up towards ceiling.
Check Quick Guide Art. no.
592867 for scope of delivery!
Safety
Guide

Surface Mounted
Suspended
VESA Mounted
4x
4x
4x
ANALOGOUT POE OUT STAT.RESET POE IN/CTRL
POE
*push*
*push*
*push*
3x
3x
3x
*use cable conduit
(not included)
*
3x
15x
Use drilling template
Art. no. 594561!
or:
Use drilling template
Art. no. 594561!
or:
VESA Standard MIS D
Bushing M4 x 0.7 x 10 mm
Use distance holder (not included) in
combination with cable ducts.
15x
15x
or: Lefthand drive!
3x
Lefthand drive!
Cut o
overhanging rope!
ANALOGOUT POE OUT STAT.RESET POE IN/CTRL
POE
3x
3.
1. 2.
3.
1. 2.
3x
4. Pull rope to tension.
1. Attach safety rope.
5. Fasten microphone.
2. Connect cable(s).
3. Lift microphone up towards ceiling.