Eagle Group SK-17 User manual

Step 1 - Attach split sleeves
(for bottom 4-sided truss
frame) to posts.
Snap split sleeve onto each post at
groove #5 (the wider part of the
taper goes toward the bottom).
split
sleeves
5
Step 2 - Assemble 4-sided truss frame to posts.
post
Eagle Foodservice Equipment, Eagle MHC, pecFAB®, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]
EG9858 Revised 03/11
(continued on back page)
CAUTION
IN PECT CONTENT IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RE PON IBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
IN TRUCTION HEET
#A226596 #SK-17 Heat Lamp Display Kit
ASSEMBLY INSTRUCTIONS
P rts List
# qty description
#1 1 14˝ x 48˝ wire shelf
#2 1 14˝ x 48˝ three-sided truss frame
#3 1 14˝ x 48˝ four-sided truss frame
#4 4 74˝ posts
#5 4 hooks
#6 2 heat lamp brackets
#7 4 screws, #8-32 x 3/8˝
#8 3 bags of 4 split sleeves
#1
#2
#4
#3
#8
#5
#6
4-sided
truss
frame
split
sleeve
4-sided
truss
frame
#7

top shelf
36˝-long
heat lamp
#SK-17 Heat Lamp Display Kit
ASSEMBLY INSTRUCTIONS
(End)
Step 4 - Assemble 3-sided truss frame
to posts.
Note: The open side of the 3-sided truss frame
indicates the front side of the unit.
Step 3 - Attach split sleeves
(for 3-sided frame) to posts.
Snap split sleeve onto each post at
groove #35.
split
sleeves
3-sided
truss frame
split
sleeve
3-sided
truss
frame
4-sided
truss frame
Step 7 - Install 36˝ heat lamp*.
Referring to illustration below,
bac screws out of heat lamp,
per end. Attach brac ets as shown.
Hoo heat lamp* onto underside of top shelf.
Assembly is complete.
* Heat lamps sold separately.
Display unit accommodates
pac aged heat lamps* up to
60˝ length.
36˝ units
48˝ units
60˝ units
35
Eagle Foodservice Equipment, Eagle MHC, pecFAB®, and Retail Display are divisions of Eagle Group. ©2011 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone]
Step 6 - Assemble top shelf to posts.
Step 5 - Attach split sleeves
(for top shelf) to posts.
Snap split sleeve onto each post at
the topmost groove.
split
sleeves
top shelf
74 split
sleeve
top
shelf
hooks
36˝-long
heat lamp
screws
screws
(from
heat lamp)