Seville Classics WEB722 User manual

0702202207022022
Seville Classics® Inc.
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Email: [email protected]
Homepage: www.sevilleclassics.com
•Dimensions: 24.5" to 45" W x 9" D x 28.9" H
•30 pair capacity (includes the floor underneath) of women’s shoes
(evenly distributed and fully expanded)
•25 pair capacity (includes the floor underneath) of men’s shoes
(evenly distributed and fully expanded)
•Weight: 5.5 lbs.
•Do not sit on the rack.
•Do not drop heavy items on the rack.
•Do not move the rack while loaded.
•Do not move rack by lifting the poles, use the handles at the top
of each side frame.
Model No.: WEB722
4-Tier Expandable Shoe Rack

Right Side Panel (1)
Side Panel (1)
C. Expandable Rods (8)
D. Screws (16) STEP 1.
to the thick side (L) of the
Expandable Rods (C) using the Screws (D) and a philips
screwdriver (not included).
Make sure the horizontal supports on the side panels angle
downward and face forward.
horizontal
support needs to
be angled
downward
facing the same
direction.
NOTE: Make sure the
square plates on the
side panels are facing
towards the inside.
Note: Phillips screwdriver is needed for assembly, not included.
Thick
side
Thin
side
(R)
B
D
C
Please make sure you have all the parts on this list.
(L)
(L)
(R)
Get help with assembly and report damaged or missing parts.
E mail: [e-mail]
Telep h o n e: 1 [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Get help with assembly and report damaged or missing parts.
E mail: [e-mail]
Telep h o n e: 1 [phone]
Hours: 8:30 AM - 4:30 PM (PST)

STEP 3.
Expand the shoe rack horizontally as needed.
STEP 2.
A�ach the Right Side Panel (A) to the thin side (R) of the
Expandable Rods (C) using the Screws (D) and a philips
screwdriver (not included).
Make sure the horizontal supports on the side panels angle
downward and face forward aligning with each other.
34
B
A
C D
(L)
(R)
Get help with assembly and report damaged or missing parts.
E mail: [e-mail]
Telep h o n e: 1 [phone]
Hours: 8:30 AM - 4:30 PM (PST)
Get help with assembly and report damaged or missing parts.
E mail: [e-mail]
Telep h o n e: 1 [phone]
Hours: 8:30 AM - 4:30 PM (PST)