Seville Classics SHE15385B User manual

Customer Service Informaon
Telephone: [phone]
Fax: [phone]
Hours: 8:30 AM – 4:30 PM (PST)
Email: [e-mail]
Homepage: www.SevilleClassics.com
082020
Specicaons
Dimensions: 36" W x 14" D x 56.5" H
Weight capacity Per shelf Overall
On leveling feet 300 lbs. (136 kg.) 1200 lbs. (544.3 kg.)
On wheels 82.5 lbs. (37.4 kg.) 330 lbs. (150 kg.)
Congratulaons!
Enjoy your now complete shelving unit.
Cauon
Place heavier items on the lower shelves and lighter ones on the top.
Do not stand or climb on the shelving system.
Do not drop heavy items on the system.
Do not move the system while loaded.
UltraDurable® Commercial-Grade NSF
4-Tier Steel Wire Shelving
Model #: SHE15385B
Thank you for choosing Seville Classics! We hope that you enjoy your
steel wire shelving! Please read through this guide for parts list, assembly
instrucons, frequently asked quesons and further contact informaon.
082020

D. Shelves (4)
Parts List
B. Boom Poles (2)
Please make sure you have all the parts on this list.
If you’re missing parts, contact us for replacements at
[phone] or send an email to [e-mail]
1
E. Feet (4)
Assembly Instrucons STEP 1.
Screw WHEELS (F) and LOCKING
WHEELS (G) into base of boom
poles with WRENCH (H). Or, screw in
LEVELING FEET (E). Repeat for all
boom poles.
STEP 2.
Snap SLIP SLEEVES (A) around the
grooves on BOTTOM POLES (B) for
your lowest shelf.
TIP! Count the number of grooves
from the boom of the pole to keep
the height consistent.
A. Slip Sleeves (16)
F. Wheels (2)
G. Locking wheels (2)
H. Wrench (1)
C. Top Poles (2)
2
STEP 3.
Fit SHELF (D) over the top of the 4 poles
and over SLIP SLEEVES (A).
Repeat STEPS 2-3 for remaining shelves.
TIP! If necessary, lightly tap shelves into
place with a rubber mallet.
STEP 4.
Screw TOP POLES (C) into the tops of the
BOTTOM POLES (B).
STEP 5.
Repeat STEPS 2-3 for remaining shelves.