Seville Classics UltraHD 20594 User manual

ASSEMBLY INSTRUCTIONS
UltraHD® Cabinet Stacker
(Model No. 20594，20595)
(762cm x 45.7cm x 46.9cm H)
30in. W x 18in. D x 18.5in. H
Granite
Graphite
Reference page 9 for special care
and maintenance of stainless steel
SC230720

#3
#8-A
#1
#6
#55
#27-B
#55-A
#60
#61
#27
#63 #41
#23
#42
#17-A
#20-A
#14-A
#54
#14
Includes Engineered
Nylon Anchors for
quick assembly
#2
#7
#4 #15-A
#23
#18-A
#19-A
#15
#63
1

PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please see page 10.)
(#1) Left Panel x 1 PC (#2) Right Panel x 1 PC
(#3) Top Panel x 1 PC (#4) Bottom Panel x 1 PC
(#6) Left Door x 1 PC (#7) Right Door x 1 PC
(#8-A) Back Panel x 1 PC (#60) Mounting Strap x 2 PCS
2

(#19-A) Right Back Bottom Corner Protection x 1 PC (#20-A) Left Back Bottom Corner Protection x 1 PC
(#14-A)Left Back Upper Corner Protection D x 1 PC (#15-A)Right Back Upper Corner Protection C x 1 PC
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please see page 10.)
(#14) Corner Protection A x 1 PC (#15) Corner Protection B x 1 PC
(#17-A) Left Front Bottom Corner Protection x 1 PC (#18-A) Right Front Bottom Corner Protection x 1 PC
3

Included for quick assembly
(#42) Screw G (M4 x 30L) x 6 PCS (#54) Screw N (M4 x 10L) x 26 PCS
(#55) Screw M (M6 x 50L) x 2 PCS (#55-A) Wall Anchor x 2 PCS
(#21) Screw Driver x 1 PC (#22) KEY x 2 PCS
(#61) Screw O (M4 x 12L) x 2 PCS (#63) Engineered Nylon Anchor x 2 PCS
(#27-B) WASHER (M8)x 2 PCS (#41) Screw F (M4 x 8L) x 40 PCS
PARTS LIST
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please see page 10.)
(#23) Magnet x 2 PCS (#27) WASHER (M4) x 2 PCS
4

Step 1:
Step 2: Install Right Panel (#2)
Place the Top Panel (#3) and Right Panel (#2)
UltraHD® Cabinet Stacker (Model No. 20594,20595)
*NOTE: We recommend using TWO people to assemble the cabinet*
TIP: A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep on a low
torque setting.
Install Left Panel (#1) to the Top Panel (#3)
Place the Left Panel (#1) on the ground vertically.
Make sure the front of the panel faces downward.
Place the Top Panel (#3) next to the Left Panel (#1).
Line up the screw holes, use 3 pcs of Screw F (#41)
to tighten.
Back
Front
Back
#3
#1
#41
#2 #3
Step 3: Install Bottom Panel (#4).
Attach the Bottom Panel (#4) to the Left and Right
Side Panels (#1 and #2). Make sure the front of the
panel faces downward. Use 6 pcs of Screws G (#42)
to assemble the panels.
Place the Top Panel (#3) and Right Panel (#2)
vertically. Line up the screw holes, use 3 pcs of
Screw F (#41) to tighten.
Front
Front
#41
#42
#2
#4
Front
#1
5

Step 4:
UltraHD® Cabinet Stacker (Model No. 20594,20595)
*NOTE: We recommend using TWO people to assemble the cabinet*
1.Place the Back Panel (#8-A) onto both Left
and Right Side Panels (#1 and # 2) and Top and
Bottom Panel (#3 and #4). Use the 8 pcs of
Screw F (#41) to tighten.
2.Use Engineered Nylon Anchor (#63), Line up
the screw holes (as shown below), and press
firmly into them.
Install Back Panel (#8-A).
Front
#41
#8-A
#3
#4
#63
#3
Step 5:
Step 6:Install Left Door (#6)
Attach the Left Door (#6) to the Left Panel (#1).
Use 3 pcs of Screw F (#41) to tighten the Door
Panel.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame.
Install Magnet (#23)
Use 4 pcs of Screw F (#41) to install the Magnet
(#23) on the Top Panel (#3) and the Bottom
Panel (#4).
#23
#4
#41
#1
#41
#6
6

Step 7:
Step 8:Install the Corner Protection A&B (#14&15) ,
Left Back Upper and Right Back Upper
UltraHD® Cabinet Stacker (Model No. 20594,20595)
*NOTE: We recommend using TWO people to assemble the cabinet*
Attach the Right Door (#7) to the Right Panel
(#2). Use 3 pcs of Screw F (#41) to tighten the
Door Panel.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame.
Install Right Door (#7)
#41
#7
#2
#41
#14
#14-A
Note
Step 9:Remove the top Corner Protection brackets
from Model No. 20162B /20163B Tall
Cabinet as the left photo shows.
Fully tighten the screws after all the corner
protections are attached.
1.Use 10 pcs of Screws F (#41) to install the
Corner Protection A and B (#14 and #15) onto
the top front of the cabinet.
2.Use 6 pcs of Screw F (#41) to install the
Corner Protection C and D (#14-A and #15-A)
onto the top abck of the cabinet.
Left Back Upper and Right Back Upper
Corner Protection C&D(#14-A&#15-A)
#15
#15-A
7

Step 10:
UltraHD® Cabinet Stacker (Model No. 20594,20595)
*NOTE: We recommend using TWO people to assemble the cabinet*
Remove 2 pcs (#60) Mounting Strap and
screws from the top back panel of
20162B/20163B.
Step 11:
A. Place Cabinet Stacker Model No. 20594 /
20595 on top of 20162B/20163B.
B. Attach the Left Front Bottom Corner Protection
(#17-A), Right Front Bottom Corner Protection
(#18-A), Right Back Bottom Corner Protection
(#19-A), Left Back Bottom Corner Protection (#20-
A) on the bottom of the cabinet, use 26 pcs of
Screw N (#54) to tighten.
Attach Cabinet Stacker Model No.
20594/20595
#20-A
#19-A
#18-A
#54
#17-A
8

Step 12:
UltraHD® Cabinet Stacker (Model No. 20594,20595)
*NOTE: We recommend using TWO people to assemble the cabinet*
Install Mounting Strap (#60)
A. Remove 1 pc Screw F (#41) from the Right
Back Upper Corner Protection.
B. Attach the Mounting Strap (#60) to the
back Corner Protection brackets as the left
photo shows using Screw O (#61) and
Washer (#27).
C. Drill a hole in the wall with a 5/16" drill
bit, insert the Wall Anchor (#55-A) into the
hole.
D. Attach the other end of the Mounting
Strap (#60) to the wall using Screw M (#55)
and Washer (#27-B).
#60
#55-A
#27-B
#55
#61
#27
Stainless Steel Maintenance:
These parts have an UltraGuard® fingerprint resistant finish. Do not use traditional
stainless steel cleaners on this unit. Lightly wipe off once a month with clean warm
water and a soft cloth (preferably a micro fiber cloth). This is the safest formula to
prevent new stains from appearing over time and manage unwanted fingerprints or
grease marks. Remember to always wipe in the direction of the surface grain (NEVER
ACROSS) and always use a lint-free cloth. Once the surface is clean,thoroughly wipe
dry with a soft absorbent cloth.
Repeat steps A through D to install the
other mounting strap.
Warning: To prevent possible tipping, it is suggested
that the Mounting Straps be installed. For safety,
secure the mounting straps to wood studs whenever
possible.
9

Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: [phone] within USA
Fax: [phone]
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: sup[email protected]
Website & Online Store: www.sevilleclassics.com
UltraHD® Line
***Please visit our website or call and inquire about our additional UltraHD Line***
CONTACT INFORMATION
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact our
bilingual (English and Spanish) customer service department at:
UltraHD® Tall Storage Cabinet
UltraHD® Mega Storage Cabinet
Model No. 16236 (Granite)
Model No. 16238 (Granite)
Model No. 20143 (Graphite)
Model No. 20148 (Graphite)
Model No. 20153 (Red)
Model No. 20158 (Red)
Model No. 20153 (Red)
Model No. 20158 (Red)
Model No. 20133 (White)
10

UltraHD® 4-Drawer Rolling Cabinet UltraHD® 6-Foot Height Adjustable Workbench
Model No. 20205 (Granite) Model No. 20293 (Granite)
Model No. 20258 (Graphite) Model No. 20292 (Graphite)
Model No. 20252 (White)
UltraHD® Wall Cabinet with Open Shelf UltraHD® 2-Door Rolling Workbench
Model No. 20230 (Granite) Model No. 20262 (Granite)
Model No. 20140 (Graphite) Model No. 20142 (Graphite)
Model No. 20150 (Red) Model No. 20152 (Red)
UltraHD® Trash Bin UltraHD® Lighted Workcenter
Model No. 20215 Model No. 20247 (Granite)
Model No. 20246 (Graphite)
Model No. 20157 (Red)
UltraHD® Line
11