Seville Classics UltraHD 20141 User manual

TR171205
UltraHD Height Adjustable Workbench
72 in W X 25 in D X 28.5~42 in H
ASSEMBLY INSTRUCTIONS
(Model No. 20141)
(1.82m x 63.5 cm x 72.4 cm~1.06 m)

(pg 1 of 5)

(#1) Bottom Crossbar x 1 PC
(#5) Leg x 3 PCS
PARTS LIST (pg 2 of 5)
(#3) Wood Top x 1 PC
(#2) Top Crossbar x 2 PCS
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please refer to page 5 of 5) to send you the missing parts.
(#25) Wrench x 1 PC
(#27-B) Washer x 38 PCS
(#26-B) Hand Knob x 6 PCS
(#6) Leveling Feet x 6 PCS
(#40) Screw E M8 x 18L 32 PCS

Step 1. Assemble Top Crossbar (#2)
Note:
Step 2.
Adjust the Height of the Leg(#5)
Note:
Step 3. Assemble Leg (#5)
Note:
Fasten all screws after this step.
Each Leg (#5) have holes near the bottom of the frame.
Make sure all the holes are facing the back of the unit.
Adjust the height of the workbench before
assembling the Hand Knob (#26-B). Height range
is from 28.5 in. to 42 in.
UltraHD Height Adjustable Workbench (Model No. 20141) (Pg 3 of 5)
*NOTE: We recommend using TWO people to assemble the work bench.
Open the package, remove and place all parts to the
side. Then open the package of the Solid Hardwood
Top (#3).
Attach both Top crossbars (#2) to the Solid
Hardwood Top (#3). Use 8 pcs Screw E (#40) with
Washer (#27-B) and Wrench (#25) to tighten.
Do not fullly tighten the screws after finish
assembling Step 3.
Attach the Legs (#5) as the left photo shows, line up
screw holes, use 18 pcs Screw E (#40) and Washer
(#27-B) to tighten the leg.
1. Adjust the Leg (#5) to your desired height.
2. Insert 6 pcs of Hand Knob (#26-B) into the leg
tube using Washer (#27-B).
Front
Back
Back
Front

Step 4.
Step 5. Assemble leveling Feet (#6)
Attach the Bottom Crossbar (#1) to the back of the
Legs (#5), line up the screw holes, use 6 pcs Screw E
(#40) with Washer (#27-B) and Wrench
(#25) to tighten.
If you want to adjust the height of the Workbench, turn the
workbench upside down. Untighten the Hand Knobs and
adjust the height.
Turn the workbench up right once you finish this step.
After installing Bottom Crossbar (#1), insert the
Leveling Feet (#6) into the Legs (#5), use Wrench
(#25) to tighten.
UltraHD Height Adjustable Workbench (Model No. 20141)(Pg 4 of 5)
*NOTE: We recommend using TWO people to assemble the work bench.
Assemble Bottom Crossbar (#1)
Front
Back

***Please visit our website or call and inquire about our additional UltraHD Line***
Website & Online Store: www.sevilleclassics.com
CONTACT INFORMATION (pg 5 of 5)
*If you are missing any parts, have any questions, or need additional assistance in assembly, please contact
our bilingual (English and Spanish) customer service department at:
Seville Classics, Inc.
19401 South Harborgate Way
Torrance, CA 90501
USA
Telephone: [phone] within USA
Hours: 9:00am - 4:30pm (Pacific Standard Time)
Fax: [phone]
E-mail: [email protected]

Model No. 20140
UltraHD Wall Cabinet
Model No. 20146
UltraHD Workbench
Model No. 20142
UltraHD Rolling Workbench
Model No. 20145
UltraHD Rolling Cabinet
Model No. 20148
UltraHD Storage Cabinet
Model No. 20143
UltraHD Storage Cabinet
UltraHD Line