Seville Classics 20288 User manual

TR170420
UltraHD Height Adjustable Workbench (Model No. 20288)
48 in W X 24 in D X 28.5-42 in H
ASSEMBLY INSTRUCTIONS
(1.21m x 60.9 cm x 72.4-106.7 cm)

(pg 1 of 5)

(#40) Screw E M8 x 18L 14 PCS
(#1) Wood Top x 1 PC
PARTS LIST (pg 2 of 5)
(#3-B) Bottom Crossbar x 1 PC
(#4) Top Crossbar x 2 PCS
Please check the parts carefully according to the parts list. If you are missing any parts, please call our
customer service department (please refer to page 5 of 5) to send you the missing parts.
(#26) Hand Knob x 4 PCS
(#27-B) Washer x 18 PCS
(#25) Wrench x 1 PC
(#5-B) Leg x 2 PCS
(#6) Leveling Feet x 4 PCS
M8X20 pcs

Step 1: Assemble Top Crossbar (#4)
Note:
Do not fullly tighten the screws after finish
assembling Step 2.
Step 2: Assemble Leg (#5-B)
UltraHD Height Adjustable Workbench (Model No. 20288) (Pg 3 of 5)
*NOTE: We recommend using TWO people to assemble the workbench.
Open the package, remove and place all parts to the
side. Then open the package of the Solid Hardwood
Top (#1).
Attach both Top crossbars (#4) to the Solid Hardwood
Top (#1). Use 10 pcs Screw E (#40) with Washer (#27-B)
and Wrench (#25) to tighten.
Insert the Leg (#5-B) into the tube of the Top
Crossbar (#4). Make sure the plastic sleeve
hole as the left picture shows attached
together properly.

Step 3:
42 In.
Note:
28.5 In.
Step 4:
28.5 In.
Assemble Bottom Crossbar (#3-B) and Leveling
Feet (#6)
Attach the Bottom Crossbar (#3-B) to the back of
(#5-B) Leg Piece, line up the screw holes, use 4 pcs
Screw E (#40) with Washer (#27-B) and Wrench
(#25) to tighten.
After installing Bottom Crossbar (#3-B), attach
Leveling Feet (#6) to Leg Pieces (#5-B), use Wrench
(#25) to tighten.
Adjust the height of the workbench before
assembling the Hand Knob (#26). Height range is
from 28.5 in. to 42 in.
42 In.
Turn the workbench up right once you finish this step.
UltraHD Height Adjustable Workbench (Model No. 20288) (Pg 4 of 5)
*NOTE: We recommend using TWO people to assemble the workbench.
Insert 4 pcs of Hand Knob (#26) into the leg tube
using Washer (#27-B).
Assemble Hand Knob (#26)
#25
#6

***Please visit our website or call and inquire about our additional UltraHD Line***
UltraHD Line
Model No. 16238
UltraHD Storage Cabinet
Model No. 16236
UltraHD Storage Cabinet
Model No. 20238
UltraHD Rolling Cabinet
Model No. 20204
UltraHD 6-Drawer Rolling Cabinet
USA
Telephone: [phone] within USA
Hours: 9:00am - 4:30pm (Pacific Standard Time)
Fax: [phone]
E-mail: [email protected]
Website & Online Store: www.sevilleclassics.com
CONTACT INFORMATION (pg 5 of 5)
*If you are missing any parts, have any questions, or need additional assistance in assembly, please contact
our bilingual (English and Spanish) customer service department at:
Seville Classics, Inc.
19401 South Harborgate Way
Torrance, CA 90501

Model No. 20217
UltraHD Trash Bin
Model No. 20255
UltraHD Tool Box
UltraHD Line
Model No. 20206
UltraHD Workbench
Model No. 20230
UltraHD Wall Cabinet
Model No. 20283
UltraHD Mobile Table
Model No. 20262
UltraHD Rolling Workbench