SHANGRI-LA BICCA SLBICCABFNA User manual

BICCA BUFFET
SLBICCABFNA

Important Information:
•Please read the entire manual carefully before starting to assemble and/or using this
product. Follow the manual thoroughly and keep it for further reference.
•Two people are required for this assembly.
If gaps are present between the doors, refer to the above guide to adjust the hinges.
SAFETY & WARNINGS
WARNING: The screw supplied together with the anti-toppling bracket
is to be used only for fixing the anti-topple bracket to the furniture. Some
products must be fixed directly to the wall (without bracket) and for
these no screws are included. In addition to this, you will need to choose
a screw or fitting which is suitable for securing the bracket to the kind of
walls you have. If you are unsure about what type of screw to use
contact your local hardware store.

①
1260 x 400 x 18mm
x1
⑧
634 x 406 x 4mm
x2
②
624 x 400 x 18mm
x1
⑨
634 x 406 x 4mm
x1
③
624 x 380 x 18mm
x1
⑩
618 x 404 x 18mm
x1
④
624 x 380 x 18mm
x1
⑪
618 x 404 x 18mm
x2
⑤
624 x 400 x 18mm
x1
⑫
360 x 130 x 40mm
x2
⑥
1260 x 400 x 18mm
x1
⑬
1059 x 40 x 10mm
x2
⑦
395 x 365 x 18mm
x3
COMPONENTS

Hardware:
A80x38x19mm (x3)
BM6x40mm (x4)
CM5x55mm (x8)
DM6x45mm (x8)
EΦ15x12mm (x8)
FΦ8x30 (x16)
GΦ5x38mm (x8)
H15x13x10mm (x6)
J Φ3.5x20mm (x6)
KΦ35/FK9mm (x2)
LΦ35/FK17mm (x4)
MM4x14mm (x30)
NΦ5/ Φ5mm (x12)
P150x30x1mm (x2)
QM4x12mm (x4)
RΦ10mm (x6)
S 4mm (x1)
T3mm (x1)
UΦ21mm (x8)
Additional tools required:
Phillips head screwdriver Flat head screwdriver Mallet
•Electric drill may be required to create holes in wall for
secure mounting.
•Do not use an electric drill for tightening screws on the
cabinet during assembly.

Step 1:
FΦ8x30 (x16)
ASSEMBLY

Step 2:
DM6x45mm
(x8)
P150x30x1mm
(x2)
QM4x12mm
(x4)
RΦ10mm (x4)

Step 3:
EΦ15x12mm (x8)

Step 4:

Step 5:
GΦ5x38mm (x8)
T3mm (x1)

Step 6:
BM6x40mm (x4)
S 4mm (x1)

Step 7:
CM5x55mm (x8)

Step 8:
H15x13x10mm (x6)
J Φ3.5x20mm (x6)

Step 9:
NΦ5/ Φ5mm (x12)
UΦ21mm (x8)

Step 10:

Step 11:
A80x38x19mm
(x3)
KΦ35/FK9mm
(x2)
LΦ35/FK17mm
(x4)
MM4x14mm
(x18)
Step 11-A: Left door (part 10, hinge L)

Step 11-B: Middle door (part 11, hinge K)
Step 11-C: Right door (part 11, hinge L)

Step 12:
MM4x14mm (x12)

Step 13:
RΦ10mm (x2)
TOPPLING FURNITURE WARNING:
•It is strongly recommended that this product is permanently fixed to the wall.
•Please seek professional advice if you are in doubt of what fixing device to use.
•Regularly check that anchors are securely maintained.
•Stability of tall items may be affected by thick carpets or uneven floors.
•Do not place unanchored televisions on furniture.
Caution!
For your safety when attaching the anchor fixings, please note the following:
Check any electrical wires or plumbing inside the wall before drilling any holes (if you
are unsure please seek professional advice from a qualified tradesperson).

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com