Shark DuoClean IC160UK Series User manual

A S SE M B LYWHAT’S INSIDE
IC160UK_Series_QSG_MP_180823_MV2
QUICK START GUIDE
Please be sure to read the enclosed Shark® Instructions prior to using your unit.
DuoClean™ Cordless Upright
with Powered Lift-Away™
A
B
C
D
NOTE: Not all units come with all accessories shown here.
Please see the top flap of your box for the select accessories
included with your unit.
NOTE: The Lithium-Ion Battery must be charged before first
use. A complete charge takes approximately 3.5 hours.
K
J
L
1 Insert wand into floor nozzle.
2 Insert handle into wand.
3 Align the bottom of pod onto the rails on
the front neck of the floor nozzle. Slide
pod down the rails until it clicks into place.
4 Connect hose to back of pod, and attach
hose clip onto wand.
5 Insert fully charged battery into pod with
the handle toward the back.
For proper operation, ensure all are firmly
connected.
E F
GH
I
A Handle and Hose
B Wand
C Vacuum Pod
D DuoClean™ Floor Nozzle
E Crevice Tool
F Dusting Brush
G Motorised Pet Tool (Certain Models Only)
H Wide Upholstery Tool
I Accessory Tote Bag
J Lithium-Ion Battery
K Charging Cord
L Battery Charging Cradle (Click)
(Click)
(Click)
1 2
4
(Click)
3
(Click)
5
(Click)

3 WAYS TO CHARGE
NOTE: The battery must be charged before first use.
A complete charge takes approximately 3.5 hours.
Charge Indicator gauge on top of battery will illuminate
when charging. See enclosed Instructions for details.
© 2018 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
DUOCLEAN AND POWERED LIFT-AWAY ARE TRADEMARKS OF EURO-PRO EUROPE LTD.
IN VACUUM
@sharkcleaninguk @sharkcleanuk @sharkcleanuk
CHARGING CRADLE
To remove the battery for charging, lift the handle on
top of the battery and pull up. The battery must be
charged before first use.
A complete charge takes approximately 3.5 hours.
IMPO RTANT: When charging, connect the charger
to the port first, then plug the charger into socket.
OUT OF VACUUM
VERSATILE CLEANING
SETTINGS
Press icon to turn power on
or off.
Power
Press icon to select surface
setting:
Carpet
For carpets.
Floor
For hard floors and rugs.
Press icon to boost power:
BOOST
When in Lift-Away®
mode, press BOOST icon
to turn on or off.
The default power setting
on floors and carpets is
ION Power mode. For an
additional boost of suction
power, press and hold the
BOOST icon.
MODES
NOTE: Vacuum pod may also remain on floor nozzle in
Above-Floor mode.
NOTE: Accessories attach to either the wand or the handle.
For cleaning carpets and hard
floors. To activate brushroll, step
on floor nozzle and tilt handle
back.
Use Powered Lift-Away to reach
under furniture to clean carpets
and hard floors.
POWERE D LIFT-AWAY™
UPRIGHT
Use the wand in Lift-Away mode
for more reach when cleaning
above-floor areas like coving or
skirting boards.
LIFT-AWAY™ WITH WAND
Use the handle in Lift-Away mode
for more detailed cleaning of
above-floor areas like upholstery,
window sills or stairs.
LIFT-AWAY WITH HANDLE
POWER BUTTON
SURFACE
SUCTION LEVEL
IMP ORTANT: Your unit will default to Max Power when
using in Lift-Away mode. Max Power shortens runtime.
NOTE: Select Carpet mode for stuck-on dust and debris.