Sharp TM150 User manual

1-1
Introduction
Introduction
Thank you for purchasing this SHARP mobile handset.
Before and while using the handset, please read this
manual thoroughly and retain it for future reference. This
handset is your partner. Handle it carefully at all times to
ensure its long-term performance.
About this Operation Manual
Instruction scheme
Instructions in this manual are carefully designed to help
you operate the handset smoothly and easily. At the
beginning of each section, the steps that have to be
followed to reach the function you wish to utilize are
shown (Example 1). The steps for all subsequent
subsections are simplified (Example 2). Make sure to
press Bto enter your selection.
Example 1:
(Excerpt from “Viewing the Contacts List” on page 9-54)
1Press B.
The main menu appears.
2Press a, b, cor dto highlight “Contacts”
and press B.
3Press aor bto highlight “Contacts list” and
press B.
The index view of the “Contacts list” appears.
In example 1, each step to reach the “Contacts list” is
shown.
Example 2:
(Excerpt from “Selecting the Memory for saving” on
page 9-55)
1At the main menu, select in the following order:
“Contacts” →“Contacts list.”
2Press C[Options].
The “Options” menu appears.
In example 2, the steps to reach the “Contacts list” are
simplified as shown above (step1).
Symbols
B, a, b, c, dand C[Options] indicate the
operation keys in this manual. For information on
the keys and handset operations, refer to “Parts
and Controls” on page 4-22.
This indicates useful extra information for
operating the handset.
This indicates important background information
or items that need to be recognized when
operating the handset.
This indicates operations that require extreme
caution before performing on the handset.

1-2
Introduction
NOTICE
We strongly recommend that you keep separate
permanent written records of all important data. Data
may be lost or altered in virtually any electronic
memory product under certain circumstances.
Therefore, we assume no responsibility for data lost or
otherwise rendered unusable, whether as a result of
improper use, repairs, defects, battery replacement,
use after the specified battery life has expired or any
other cause.
We assume no responsibility, directly or indirectly, for
financial losses or claims from third parties resulting
from the use of this product and any of its functions,
such as stolen credit card numbers, the loss or
alteration of stored data, etc.
All company and/or product names are trademarks
and/or registered trademarks of their respective
holders.
Screen layouts illustrated in this operation manual
may differ from those on the handset.
The information described in this operation manual is
subject to change without notice.
Some of the functions described in this operation
manual may not be supported by all networks.
We assume no responsibility for content, information,
etc. downloaded from the network.
The CGS-LCD used for the main display is a world
advanced technology product, giving you fine picture
quality. Occasionally, a few black or bright pixels may
appear on the screen. Please note that this will not
have any impact on any of the features or
performance.
Copyright
According to copyright laws, the reproduction, alteration
and use of material protected by copyright (music,
pictures, etc.) is only permitted for personal or private use.
If the user is not in possession of more extensive
copyrights or has not received explicit permission from
the copyright owner to reproduce, alter or use a copy
which made or modified in this way, this is considered to
be a violation of the copyright laws and gives the
copyright owner the right to claim for damages. For this
reason, avoid the illegal use of material protected by
copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.

1-3
Introduction
Powered by JBlend™, Copyright1997-2004 Aplix
Corporation. All rights reserved.
Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun Microsystems,
Inc. in the U.S. and other countries.
JBlend and all JBlend-based trademarks and logos are
trademarks or registered trademarks of Aplix Corporation in
Japan and other countries.
In this product, JBlend™ is incorporated.
JBlend™ is a Java execution environment
that Aplix developed for implementing
advanced performance and fast operation
on small-memory systems. JBlend and
JBlend logo are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
Licensed by Inter Digital Technology Corporation under one
or more of the following United States Patents and/or their
domestic or foreign counterparts and other patents
pending, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450 & 4,811,420.
Licensed under U.S. Patent 4,558,302 and foreign
counterparts.
CP8 PATENT
SD logo is a trademark.
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928
and 6,011,554; Australian Pat. No. 727539; Canadian Pat.
No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong
Kong Standard Pat. No. HK0940329; Republic of Singapore
Pat. No. 51383; Euro. Pat. No. 0 842 463 (96927260.8) DE/
DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional
patents are pending worldwide.
Use of this product in any manner that complies with the
MPEG-4 Visual Standard is prohibited, except for use
directly related to (a) data or information ( i ) generated by
and obtained without charge from a consumer not thereby
engaged in a business enterprise, and ( ii ) for personal use
only; and (b) other uses specifically and separately licensed
by MPEG LA, L.L.C.

1-4
Introduction
Safety Precautions and
Conditions of Use
Your handset conforms to international regulations
insofar as it is used under normal conditions and in
accordance with the following instructions.
Electromagnetic waves
Do not switch on your handset aboard an aircraft (as
your handset may interfere with the aircraft’s
electronic systems and disrupt the cellular network).
Current legislation forbids this use and legal action can
be taken against the user.
Do not switch on your handset in a hospital, except in
designated areas. Use of your handset’s functions
may affect the performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.). When
the handset function is on, do not bring it near medical
equipment or into areas in which medical equipment is
being used. If you have a hearing aid or a pacemaker,
only use the handset on the opposite side of your body
from where it is located. The handset should be kept
at least 6 inches (15.24 cm) from a pacemaker at
ANYTIME the handset is switched on.
Do not switch on your handset near gas or flammable
substances. Observe the rules concerning the use of
handsets at gas stations, chemical plants and at all
sites where a risk of explosion exists.
Caring for your handset
Do not allow children to use your handset without
supervision.
Never attempt to disassemble, repair or modify your
handset. Such action may result in bodily injury or
damage to the unit or other property. The product can
only be repaired by authorized service personnel.
Never allow any metallic objects (e.g., staples, paper
clips) to become inserted into your handset, as this
could result in the generation of excess heat or fire.
Do not use solvents to clean your handset. Use only a
soft, dry cloth.
Do not drop your handset or subject it to severe
impacts. Bending the body and pushing the display or
keys with force could damage the handset.
Do not carry your handset in your back pocket as it
could break when you sit down. The display is made of
glass and is particularly fragile.
Never touch liquid that might leak from a broken liquid
crystal display (LCD), as doing so may cause a skin
rash.
Avoid touching the external connector on the
underside of the handset, since the delicate
components within can be damaged by static
electricity.
Never use or store your handset in the following
locations:
- Anywhere it may be exposed to water (e.g.,
bathroom or sauna)

1-5
Introduction
- Conditions of high humidity (e.g., rain or fog)
- Conditions of extreme high temperatures (e.g.,
near fire or in a sealed automobile)
- In direct sunlight
- Locations or sites subject to strong vibration
It is advised that the device not be used by a driver
while the vehicle is moving, except in an emergency.
Speak only into a fixed, neck-slung or clipped-on
microphone when it would not distract your attention
from the road. Also see “Precautions Concerning
Vehicle Use” on page 1-7.
Never dispose of your device with ordinary waste.
Battery
Use your handset only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
Use only the standard accessory battery (CE-BL150).
Recommended temperature for using and storing
batteries is approximately 68°F (20°C).
The battery’s performance is limited in low
temperatures, particularly below 32°F (0°C) and the
handset may not work temporarily regardless of the
amount of remaining battery power.
Exposing the handset to extreme temperatures will
shorten battery life.
The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk time and standby time) is
noticeably shorter than normal, it is time to buy a new
battery.
Network configuration and handset usage will affect
talk time and standby time. Using games or camera
will hasten battery consumption.
When the battery charging alert is displayed on the
screen, charge the battery as soon as possible. If you
continue using your handset ignoring the alert, the
handset may malfunction and all data and settings you
have stored may be lost at any moment.
Charge the new battery as soon as possible after
removing the old one.
Before removing the battery from the handset, make
sure the handset is switched off.
Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive material
touches exposed terminals. When the battery is
detached from the handset, use a cover made of
nonconductive material for keeping and carrying the
battery safely.
Never attempt to disassemble or modify the battery.
Never touch any fluid that may leak from the internal
battery, as doing so may result in injury to the skin or
eyes.

1-6
Introduction
Never drop your handset or subject it to severe shock.
This may cause the internal battery to leak, ignite and/
or rupture. Always immediately remove your handset
from the vicinity of any open flame in the event the
internal battery leaks or emits an unusual odor.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” below.
Battery Disposal
Take the used battery to the local waste depot.
Do not expose the used battery to an open flame. Do
not dispose in water or dispose with household waste.
BATTERY DISPOSAL
THIS PRODUCT CONTAINS LITHIUM-ION BATTERY.
THIS BATTERY MUST BE DISPOSED OF PROPERLY.
CONTACT LOCAL AGENCIES FOR INFORMATION ON
RECYCLING AND DISPOSAL OPTIONS IN YOUR
AREA.
Antenna Care
Do not touch the antenna unnecessarily, while using
the handset. If it is held, call quality may be hindered
leading to shortened talk-time and stand-by time
because the handset may have to operate on a higher
power level than is necessary.
Use only the antenna supplied or one approved by
Sharp for your handset. Using unauthorized or
modified antenna may damage the handset.
Moreover, since the handset may violate the
appropriate regulations, it may lose performance or
exceed the limitation of SAR levels.
To avoid impaired performance, do not damage the
antenna of the handset.
While talking directly into the microphone, please hold
the handset so that the antenna is upwards over your
shoulder.
To avoid interfering with blasting operations, please
turn off the handset in a blasting area or in a place
where a “turn off two-way radio” sign is posted.
RF Connector
This RF connector is for connecting Sharp-approved
antennas to the handset. Do not connect unapproved
or modified equipment as this may damage the
handset or cause the SAR limit to be exceeded.
Do not touch or crowd the connector unnecessarily as
this may affect standby and call times.

1-7
Introduction
Camera Operation
Learn picture quality, file formats, etc. beforehand.
Pictures are saved in JPEG format.
Be careful not to move your hand while taking pictures.
If the handset moves while taking a picture, the picture
can be blurred. When taking a picture, hold the
handset firmly to prevent it from moving, or use the
delay timer.
Clean the lens before taking a picture. Fingerprints, oil,
etc. on the lens hinder clear focusing. Wipe with a soft
cloth before taking a picture.
Miscellaneous
As the handset uses an electronic storage unit, data
may be lost or corrupted under various circumstances.
Before connecting the handset to a PC or a peripheral
unit, read the operation manual for the other unit
carefully.
If the handset’s battery has been removed for some
time, or the handset has been reset, the unit’s clock
and calendar may be reinitialized. The date and time
should be updated.
Use only the included headset for hands-free
operation. Some handsets functions may not work
when unauthorized hands free are used.
The handset uses a magnet to recognize that the
handset is closed. Do not place magnetic cards near
your handset or get the card caught in the handset as
it may damage the recorded data.
Environment
Keep your handset away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
Since this product is not waterproof, do not use it or
store it where fluids can splash onto it. Raindrops,
water spray, juice, coffee, steam, perspiration, etc.
may also cause a malfunction.
Precautions Concerning Vehicle Use
It is the user’s responsibility to verify if local laws
permit the use of a handset in a vehicle. Give full
attention to driving. Pull off onto the side of a road and
park the car before making or answering a call.
If local laws permit, we recommend that you use your
handset with the attached hands-free Kit.
Use of your handset’s function may interfere with the
vehicle’s electronic systems, such as the ABS antilock
brakes or the air-bag. To ensure no such problem
occurs, please check with your dealer or car
manufacturer before connecting your handset.
Only allow qualified service maintenance personnel to
install the vehicle accessories. The manufacturer
disclaims any liability for damage which may result as
a consequence of improper use or use contrary to the
instructions contained herein.

1-8
Introduction
FCC Declaration of Conformity
Triple-band phone: TM150 with USB cable(CE-UC31)
and AC charger(CE-EA32)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430
TEL:1-800-BE-SHARP
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Information To User
This equipment has been tested and found to comply with
the limits of a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation; If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
1Reorient/Relocate the receiving antenna.
2Increase the separation between the equipment
and receiver.
3Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
4Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user’s authority to
operate the equipment.

1-9
Introduction
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted level of RF energy for
the general population.
The guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health. The exposure standard for
wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, SAR. The SAR
limit set by the FCC is 1.6W/kg, *Tests for SAR are
conducted using standard operating positions specified
by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that it does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
body) as required by FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 0.823W/kg and when worn on the body, as
described in this operation manual is 0.733W/kg.
Body-worn Operation; This device was tested for typical
body-worn operations with the back of the phone kept
15mm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain
a 15mm separation distance between the user’s body and
the back of the phone. The use of belt-clips, holsters and
similar accessories should not contain metallic
components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with
FCC RF exposure requirements, and should be avoided.
While these may be differences between the SAR levels
of various phones and at various positions, they all meet
the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of

1-10
Introduction
http://www.fcc.gov/oet/fccid after searching on FCC ID
APYNAR0057.
Additional information on Specific Absorption rates (SAR)
can be found on the Cellular Telecommunications &
Internet Association (CTIA) web-site at:
http://www.phonefacts.net
*In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6Watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
Declaration of Conformity
SAR
Your handset has been designed, manufactured and
tested so as not to exceed the limits for exposure to
electromagnetic fields recommended by the Council of
the European Union. These limits are part of
comprehensive guidelines developed by independent
scientific organizations. The guidelines include a
substantial safety margin designed to assure the safety of
the handset user and others and to take into account
variations in age and health, individual sensitivities and
environmental conditions. European standards provide
for the amount of radio frequency electromagnetic energy
absorbed by the body when using a handset to be
measured by reference to the Specific Absorption Rate
(SAR). The SAR limit for the general public is currently 2
watts per kilogram averaged over 10 grams of body
tissue. Your handset SAR value is 0.452 watts per
kilogram.
This has been tested to ensure that this limit is not
exceeded even when the handset is operating at its
highest certified power. In use however your handset may
operate at less than full power because it is designed to
use only sufficient power to communicate with the
network.
Hereby, Sharp Telecommunications of Europe Ltd, declares
that this TM150 is in compliance with the essential
requirements and other relevant provisions of Directive
1995/5/EC.
A copy of the original declaration of conformity can be
found at the following Internet address:
http://www.sharp-mobile.com/tm150/

2-11
Table of Contents
Table of Contents
Introduction ................................................. 1-1
About this Operation Manual ...............................1-1
NOTICE ................................................................1-2
Copyright ..............................................................1-2
Safety Precautions and Conditions of Use ...........1-4
FCC Declaration of Conformity ...........................1-8
Exposure to Radio Waves .....................................1-9
Declaration of Conformity ..................................1-10
SAR ....................................................................1-10
Table of Contents ...................................... 2-11
Quick Setup ............................................... 3-13
If You Use the Memory Card .............................3-18
If You Upgrade Your Handset ............................3-21
Parts and Controls .................................... 4-22
Main Handset Unit ..............................................4-22
Display Indicators ...............................................4-25
Guide to the Main Menu .......................... 5-28
Using the Main Menu .........................................5-28
List of Menu Function Items ..............................5-30
Basic Handset Operations ........................ 6-32
Making a Call .....................................................6-32
Answering a Call ................................................6-32
Redialing .............................................................6-33
Useful Functions ................................................6-34
Using the Camera ...................................... 7-38
Capturing Still Images ........................................7-38
Shooting Video Images ......................................7-43
Common Functions & Information ....................7-46
Entering Text ............................................. 8-51
Text Table for Multi-tap Input ...........................8-51
Selecting the Input Method ................................8-52
Selecting the Input Language .............................8-52
Using Text Templates ........................................8-53
Using the Contacts List ............................. 9-54
Contacts List Basics ...........................................9-54
Selecting the Memory ........................................9-55
Saving Information to the Contacts List ............9-56
Dialing from the Contacts List ...........................9-57
Editing the Contacts List ....................................9-59
Setting the Groups ..............................................9-64
Checking the Memory Status .............................9-65
Setting the Speed Dial List .................................9-66
Checking Own Numbers ....................................9-67
Accessing “t-zones” ................................. 10-68
Viewing the Browser ........................................10-68

2-12
Table of Contents
Using the Message Service ......................11-69
Message Types Available with the Handset .... 11-69
Creating and Sending Messages ...................... 11-70
Receiving and Reading Messages .................... 11-74
Settings for the Messages ................................ 11-80
Making Text Templates ................................... 11-81
Using VoiceMail .............................................. 11-83
Memory Status ................................................. 11-83
Setting Cell Broadcasts .................................... 11-83
Setting Cell Info ............................................... 11-85
Browsing the Browser Alerts ........................... 11-85
Enjoying Multi Media .............................12-86
Using Pictures .................................................. 12-86
Using Sounds ................................................... 12-93
Using Games or Applications .......................... 12-97
Using Videos .................................................... 12-98
Memory Status ............................................... 12-101
Using the Personal Organizer .............. 13-102
Using the Calendar ......................................... 13-102
Using the Alarm ............................................. 13-104
Using the Calculator ...................................... 13-107
Using Voice notes .......................................... 13-108
Using the Phone Help .................................... 13-109
Using the Call History ........................... 14-110
Calling from the Call Log .............................. 14-110
Saving a Call Log to the Contacts List .......... 14-111
Deleting a Call Log .........................................14-112
Clearing Call Logs ..........................................14-112
Checking the Duration of Calls ......................14-113
Checking the Amount of
Data Communication ......................................14-114
Setting the Handset ...............................15-115
Setting the Display Language .........................15-115
Setting the Main Display ................................15-115
Setting the External Display ...........................15-119
Resetting the Phone Setting ............................15-122
Setting the Profiles ..........................................15-123
Call Settings ....................................................15-129
Call Forwarding ..............................................15-133
Setting Networks ............................................15-134
Setting a PC Link Connection ........................15-136
Setting the Date and Time ..............................15-136
Setting Security ...............................................15-138
Setting an Account ..........................................15-144
Customizing Keys ...........................................15-151
Master Reset ...................................................15-152
Connecting to a PC ................................16-153
Installing Software ..........................................16-153
Troubleshooting .....................................17-155
Index .......................................................18-158
AUDIOVOX 12 MONTH LIMITED
WARRANTY .........................................19-165

3-13
Quick Setup
Quick Setup
Quick Setup gives you the basic information you need to
start using your handset by simply following the steps.
Step 1:
Unpacking
Check that you have the following items:
The handset (the battery cover attached)
Rechargeable Li-ion battery
AC charger
Hands free EARphone & MIC
Operation Manual
Some other brochures or supplements may also be
contained.
CONTAINS LITHIUM-ION BATTERY.
MUST BE DISPOSED OF PROPERLY.
Step 2:
Inserting the SIM Card and the
Battery
In order to access the services available, do not forget to
insert a SIM card and a battery. The SIM card carries the
user’s identity for accessing the network and also stores
personal information such as the phone directory and
Text messages, etc. Only use a 3V SIM card with your
handset.
If you already have a mobile phone before
purchasing this handset, you may use your
previous SIM card with the new handset. In this
case, refer to “If You Upgrade Your Handset” on
page 3-21.

3-14
Quick Setup
1Press (c) and slide the battery cover in the
direction of the arrow (d).
2Remove the battery cover.
3Slide the SIM card into the SIM holder as
illustrated.
Do not touch the metal part of the SIM terminal.
2
1

3-15
Quick Setup
4Position the battery with the model name
facing up. Insert its top end as illustrated into
slot (c) and insert the other end into position
(d).
5Align the battery cover with the battery
compartment as illustrated and slide it in the
direction of the arrow until it clicks.
Removing the SIM Card
In step 3 on page 3-14, press the tab securing the card
and slide it in the opposite direction from the SIM holder.
Step 3:
Charging the Battery
The battery is not fully charged when you purchase the
handset. Charge the battery for at least 2 hours before
using the handset. Use only the attached AC charger
(CE-EA32).
Using the Charger
1Insert the charger plug into an AC outlet.
2Open the external connector cap and insert
the charger (label facing up) into the USB/
Charger connector. The battery indicator in
the display ( ) starts animating.
2
1

3-16
Quick Setup
3When charging is complete, the Indicator
stops animating.
Removing the charger
Disconnect the charger plug from the AC outlet and
unplug the charger from the handset.
Battery Status
Check the battery indicator displayed in the upper left of
the display to estimate remaining battery power. When
the battery is empty, “ ” appears on the display and
an alarm sounds. The battery may only last for another 5
minutes. If you are using your handset, charge the battery
immediately.
The standard charging time is approximately 2
hours.
Charging time may vary depending on the
state of the battery and other conditions. For
information on the battery, refer to “Battery” on
page 1-5.
Battery Indicators Charge Level
Sufficiently charged
Partially charged
Charging recommended
Charging required
Empty

3-17
Quick Setup
Step 4:
Turning Your Handset On
Open the handset and press Fand hold for
approximately 2 seconds.
The standby screen appears in the main display.
Turning Your Handset Off
Press Fand hold for approximately 2 seconds.
Step 5:
Setting the Date and Time
Set the date and time before using the handset. If date
and time are left unset, you cannot operate some
time-based functions correctly.
1Open the handset.
2Press B.
The main menu appears.
3Press a, b, cor dto highlight “Settings”
and press B.
4Press aor bto highlight “Date & Time” and
press B.
5Press aor bto highlight “Set date/time” and
press B.
6Enter the month, day, year and time using the
digit keys and press B.
If you enter the time in the 12-hour format,
press Pto switch between am and pm.
For information on key operations, refer to
“Parts and Controls” on page 4-22.
When turning on the handset, you may be
asked to enter a PIN (Personal Identification
Number) code. Enter it and press B. For more
information, refer to “If You Upgrade Your
Handset” on page 3-21 and the brochures
supplied with the SIM card.
For more information on how to set date and
time, refer to “Setting the Date and Time” on
page 15-136.
You can also use a, b, cor dto edit the
date and time.
Date and time may be automatically set
depending on network availability of this
feature. For information on “Auto-update Date
& Time” function, refer to “Setting the
Auto-Update for the Date and Time” on
page 15-136.

3-18
Quick Setup
If You Use the Memory Card
The data storage area of the handset can be enhanced by
using the memory card. If you wish to use the handset for
taking pictures, recording videos or sounds, use of the
memory card is recommended.
Inserting the Memory Card
1Turn off the handset.
2Open the memory card slot cover.
3Insert the memory card all the way in.
4Close the cover.
2
1

3-19
Quick Setup
Memory Card Folder Configurations
Four folders entitled PICTURES, SOUNDS, VIDEOS and
.icons are created on the memory card. The pictures,
sounds and video clips are stored in appropriate folder.
Memory Card Indicator
Main Display
: Appears when the card is inserted.
: Appears when the card is inserted and locked.
: Appears when the card is damaged or unusable.
: Appears when the card is locked, damaged or
unusable.
: Appears when the card is being written or read. (the
arrow in the icon is green)
: Appears when the card is being formatted. (the arrow
in the icon is red)
External Display
: Appears when the card is inserted.
: Appears when the card is inserted and locked.
: Appears when the card is damaged or unusable.
: Appears when the card is locked, damaged or
unusable.
: Appears when the card is being written or read. (the
arrow in the icon is green)
: Appears when the card is being formatted. (the arrow
in the icon is red)
When you turn on the handset while the
memory card is in, the message “Memory card
is in” appears in the main screen and the
memory card indicator is displayed both in the
main and external display.
When you insert the memory card while the
handset is turned on, the message “Memory
card is inserted” appears in the main display
and the memory card indicator is displayed
both in the main and external display.
Use only SD memory cards up to 512 MB or
MMC up to 128 MB. Please note that some
types of MMC may not be compatible with your
handset.
The miniSD memory card cannot be used with
your handset.
Be sure to insert the card in the correct
direction and orientation.
The SD memory card has a write-protect
switch that prevents you from deleting contents
by accident. If you slide the switch to the lock
position, you cannot save or delete files.
Do not open the memory card cover while the
memory card is being formatted, written to or
read from. The card may be damaged beyond
use.
Keep all memory cards out of the reach of
small children.

3-20
Quick Setup
Removing the Memory Card
1Turn off the handset.
2Open the SD memory card slot cover,
remove the card and close the cover.
Formatting the Memory Card
If you wish to clear all data stored in the memory card,
format the memory card according to the following steps.
The handset code is needed to format the memory card.
For information on the handset code, refer to “Enabling
the Handset Lock” on page 15-139.
1Press B.
The main menu appears.
2Press a, b, cor dto highlight “Settings”
and press B.
3Press aor bto highlight “Memory card” and
press B.
4Press aor bto highlight “Format” and press
B.
5Enter your handset code and press B.
If you wish to cancel, press A[Back] before
entering the handset code.
When you remove the memory card while the
handset is turned on, the message “Memory
card is removed” appears in the main display
and the memory card icon disappears both in
the main and external display.
Do not remove the memory card while the
memory card is being formatted, written to or
read from.