Sharp YO-520 User manual

REPLACEMENT MODEL
MODEL
YO-520
ZQ-520
ZQ-540
(include PC soft)
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
AC ADAPTOR
0.5W
DIMENSIONS (mm)
CALCULATIONS
Weight
Accessories
Name : LI353402 YO / ZQ-520 : LHF08CH1
ZQ-540 : LHF16C17 OTHER SPECIFICATIONS
KEY SYSTEM Rubber spring
Type : CHIP (174pins) TSOP (40pins)
POWER SUPPLY AC : X DC : O
BATTERY TYPE
Operating battery : LR03 x 2 pcs
AUTO POWER OFF Approx.7minutes
MEMORY PROTECT Yes
RECHARGEABLE BATTERY
POWER CONSUMPTION
139.0(W) x 80.0(D) x 21.0(H) mm (When closed)
139.0(W) x 145.5(D) x 11.8(H) mm (When open)
Four arithmetic calculations, Constant calculation,
Power calculation, Chain calculation, Reciprocal
calculation, % calculation, Add-on (discount)
calculation
Approx.175g (0.39lb.)(Including batteries)
Alkaline batteries LR03 x 2, Operation manual,
Software CD-ROM, PC Link cable
Display : 120 x 40 dot matrix liquid crystal display
Applications : Calendar, Schedule, To Do Anniversary, Telephone, Memo, Expense,
Expense Report, Clock, Calculation, Conversion
Memory capacity :
ZQ-520 : 1MB Flash memory User area approx. 896 KB
ZQ-540 : 2MB Flash memory User area approx. 1,920 KB
Application capacity :
ZQ-520 : 10,000 entries (Schedule 2,500, TEL 2,500, Memo 2,500, To Do 1,500,
Expense 1,000) in total
ZQ-540 : 20,000 entries (Schedule 5,000, TEL 5,000, Memo 5,000, To Do 3,000,
Expense 2,000) in total
These capacities assume the following average entry sizes.
Schedule : 22 characters / entry
Tel : 8 characters / entry in the name field 10 characters / entry in number field
Memo : 12 characters / entry in title field 18 characters / entry in description field
To Do: 30 characters / entry in description field
Expense : 6 characters / entry in amount field 11 characters / entry in memo field
* Maximum storage in each application : 5,000 entries
Maximum data size
per entry : Approx. 2,000 bytes
Calculator digits : 12
Clock mode
Accuracy : –30 seconds / month (at 25 C / 77 F)
Display : Year, month, day, day of the week, hour, minute, AM / PM, city name, time
zone
Clock system : 12-hour / 24-hour format (switchable) World clock function, daylight saving
time / summer time display function, schedule alarm function
Peripherals and Data
transfer interface:
Cable jack : 3-pin connector
Power consumption :
Operating temperature : 0 C ~ 40 C (32 F ~ 104 F)
Power supply : Battery : 3V ... (DC) ( Alkaline batteries LR03 x 2)
Battery life : Battery life may vary depending on usage.
Approx. 1200 hours ; When data is continuously displayed without
Backlight (at 25 C / 77 F).
Approx. 300 hours ; When data is continuously displayed with
Backlight, for 2 minutes per hourly use (at 25 C / 77 F).
Approx. 270 hours ; When data is searched for 5 minutes, and
displayed for 55 minutes per hourly use and Backlight is on for 2 minutes
per hourly use (at 25 C / 77 F).
L
S
I
D
I
S
P
L
A
Y
S
E
C
T
I
O
N
STANDARD FUNCTION 12 digits 1M
ELEMENT : F-STN-LCD PARTS NAME : 9788
NUMERAL : Full Dot DOT Pitch : 0.04 (mm)
CAPS
EDIT
2nd
S
BATT
0.04 (mm) 0.44
0.528
0.04
SERVICE MANUAL

■Power supply
General guidelines
The Organizer uses the following type of battery :
Use Type Size / Model Qty.
General operation Alkaline batteries LR03 (L30) 2
1. Precautions
There are some extremely important points to remember when install-
ing new batteries :
•Replace the two operating batteries at the same time with new
batteries of the same type.
•Keep batteries out of the reach of children.
•Remove batteries from the unit when they become weak or when
the unit will not be used for a long period of time. Leaving weak
batteries in the unit may cause battery leakage and damage from
corrosion.
•Do not dispose of batteries by fire as they may explode.
2. Replacing the operating batteries.
The Organizer detectes two low battery levels which are warning and
fatal.When the batteries is in warning level, the BATT symbol ap-
pears at the display. In fatal level, the organizer will turn off automat-
ically without indication.
If the BATT symbol still appears or nothing is shown, replace both
of the operating batteries immediately.
1. Press OFF to turn off the Organizer.
2. Set the battery replacement switch on the bottom of the Organizer
to REPLACE BATTERIES.
3. Slide off the operating batteries cover.
4. Remove the old batteries by pulling the ribbon tab.
5. Insert the two new batteries on top of the ribbon tab, taking care to
position them correctly according to the plus (+) and minus (–)
terminals, as shown below.
6. Replace the cover.
7. Set the battery replacement switch to NORMAL OPERATION.
8. Press ON to turn on the Organizer. Then set the clock to the
correct time.
If nothing happens when you press ON :
•Setting the battery replacement switch to REPLACE BATTERIES
shuts off power to the unit. Check that the battery replacement
switch is set to NORMAL OPERATION.
•Repeat the above battery replacement procedure step by step.
★The following are the settings and contents that may change after
replacing the batteries.
•The alarm sound on and off
•The key touch tone on and off
•The DST
•The LCD contrast
•The CAPS on and off
•The memory of the calculator
•The first display contents when you press SMBL
■Using the included Software CD-ROM
The CD-ROM supplied in this package includes the following soft-
ware. With these applications, you can link your Organizer to your PC
and increase the functionality of your Organizer.
PC Software
This software enables you to synchronize data on your PC with that in
your Organizer.
Downloader for SHARP Electronic Organizer
This software lets you download a variety of contents for use with
your Organizer.
These helpful software are easy to install. Place the CD-ROM in
the CD-ROM drive on your PC, and the "SHARP Electronic Organ-
izer Menu" window will appear. Follow the instructions on the
screen to complete the installation. If the "SHARP Electronic Or-
ganizer Menu" does not appear, double click the My Computer
icon on your PC, click your CD-ROM drive then proceed to install
the software.
Before installing the software, read the software requirements.
1. PC Software Requirements
•Windows 2000 Professional, Windows 98 or Windows 95
•133MHz or higher Pentium-compatible CPU (Windows 2000 Pro-
fessional),
75MHz or higher Pentium-compatible CPU (Windows 98 or 95)
•64MB RAM (Windows 2000 Professional),
24MB RAM (Windows 98 or 95)
•16MB free hard disk space
•VGA monitor or better
•CD-ROM drive double speed or higher
•One available serial port with D-sub 9-pin connector
•Microsoft Mouse or compatible Pointing Device
•An Internet Service Provider is required for Internet and Web ac-
cess on your PC.
2. Installing PC Software
To install PC software, make sure Windows is running on your PC
and you have the CD-ROM from your SHARP Organizer package.
1. Insert the CD-ROM in your CD-ROM drive to automatically start
the installation program.
2. Click the [Install] button.
3. Follow the installation instructions that appear on the screen.
>>>>> USE FONT <<<<<
Helvetica/ Helvetica-Condensed/ Century-Schoolbook/ Symbol & OriginalFonts: (RingWorld2/RingFont2/Pa
Symbol/PartsCod)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3. To setup your Organizer for use with PC
Software
1. First turn off your PC and Organizer before connecting the sup-
plied cable.
2. Connect the standard 9-pin connector of the supplied cable to one
of the COM ports on your PC.
•You will need to purchase an adaptor in order to use a COM
port with a 25-pin connector.
3. Connect the supplied cable to the option port (COMPUTER LINK)
of your Organizer.
4. Turn on your PC and Organizer.
5. Press PC SYNC on your Organizer.
•Your Organizer is now ready to exchange data.
•Press ON at any time to exit the PC-Link mode.
•The alarm setting is ignored. The alarm will not sound during
data transfer.
•The Auto power off function is disabled in the PC-Link mode.
•If an error message appears while transferring data, press ON .
Packing form
Model Form SPEC Country
YO-520 Clamshel U1E SEC
ZQ-520 Clamshel Y12 SECL
LA1 SUK
LB1 SCA, SCNZ
LNU LAG
LOO SDB
Universal LCO SEEG, SEF, SEB
LLO SEIS, SEES
LMO SRS, SRSSC, STCL, SMEF, Agent
LDO SRH
YO-540 Clamshel U1E SEC
ZQ-540 Clamshel Y12 SECL
LA1 SUK
LB1 SCA, SCNZ
LNO LAG
LOO SDB
Universal LCO SEEG, SEF, SEB
LLO SEIS, SEES
LMO SRS, SRSSC, STCL, SMEF, Agent
LDO SRH
Parts List
NO. PARTS CODE PRICE
RANK NEW MARK PART RANK DESCRIPTION
1AE N D Battery cover
2AG N D Manual (ENGLISH + SPANISH) [U1E]
AG N D Manual (ENGLISH) [except U1E]
AG N D Manual (FRENCH) [Y12, LCO]
AG N D Manual (SPANISH) [LLO, LNU, LNO]
AG N D Manual (PORTUGUESE) [LLO, LOO]
AG N D Manual (GERMAN) [LCO]
AG N D Manual (ITALIAN) [LLO]
AG N D Manual (NETHERLAND) [LCO]
AG N D Manual (CHINESE) [LMO, LDO]
AG N D Manual (ARABIC) [LMO, LDO]
3AL N D CD-ROM for software
4AQ D Cable for PC-LINK
5AA D Chinese label [LDO]
Your PC
PC Interface Cable
(supplied)
Connected to the option port
(COMPUTER LINK) of an
Organizer

COPYRIGHT2000BYSHARPCORPORATION
Allrightsreserved.
PrintedinJapan.
Nopartofthispublicationmaybereproduced,
storedinaretrievalsystem,ortransmitted.
Inanyformorbyanymeans,
electronic,mechanical,photocopying,recording,orotherwise,
withoutpriorwrittenpermissionofthepublisher.
SHARP CORPORATION
Communication Systems Group
Quality & Reliability Control Center
Higashi hiroshima, Hiroshima 739-0192, Japan
2000 May Printed in Japan