Sharp XL-3500H User manual

– 1 –
XL-3500H
COMPACT AUDIO SYSTEM
If you require any advice or assistance
regarding your Sharp product, please
visit our web-site www.sharp.co.uk/
support.
Customers without internet access may
telephone [phone] during office
hours (or [phone] if telephoning
from Ireland).
This Quick Guide will help you to correctly
install and operate your system.
TINSE0087SJZZ A0201.TO
2
2
Accessories
1
1
AM loop aerial × 1AC power lead × 1 Remote control × 1
123
Battery installation of remote control
Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Remove the Insert the batteries Replace the cover.
battery cover. as shown.
FM aerial × 1Speaker wire × 2
*XL-3500H(E)_QG 02.1.16, 11:18 AM1

–2 –
System Connections
3
3
Right speaker
Left
speaker
Connection cable
for digital recording
(not supplied)
MD recorder
To the optical line
input socket
Wall socket
(AC 230 V, 50 Hz)
To the line
output sockets
RCA lead
(not supplied)
FM aerial
AM loop aerial VCR, DVD, etc.
TV
Right speaker Left speaker
Black
White line
Headphones
(CD only)
*XL-3500H(E)_QG 02.1.16, 11:18 AM2

–3 –
Press the ON/STAND-BY button to turn the power on.
Turn on your System
4
4
Listening to a CD
1Press the FUNCTION button until “CD STOP”appears on
the display.
If no disc is loaded, the display will be “NO DISC”instead of
“CD STOP”.
2Press the 77
77
7OPEN/CLOSE button to open the CD com-
partment.
3Place a CD on the spindle, label side up.
4Press the 77
77
7OPEN/CLOSE button to close the CD com-
partment.
The CD playback will start automatically.
*XL-3500H(E)_QG 02.1.16, 11:18 AM3

–4 –
FM stereo mode indicator
FM stereo receiving indicator
■If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may mal-
function.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in step 1, unplug and plug in
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the following:
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 Unplug the AC power lead from the AC INPUT socket
on the unit.
3 WhilstpressingdowntheMEMORY/SETbuttonandthe
44
44
4button, plug the AC power lead into the AC INPUT
socket on the unit.
■Maintenance
Do not touch the laser pickup lens. If fingerprints or dust accu-
mulate on the pickup, clean it gently with a dry cotton swab.
AC INPUT
Listening to the Radio
1Press the FUNCTION button until “FM”or “AM”appears
on the display.
2Press the TUNING (XX
XX
Xor WW
WW
W) button to tune in to the de-
sired station.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable
broadcast station.
3To receive an FM stereo
transmission:
Press the FUNCTION but-
ton to display the “ST”in-
dicator.
●“j”will appear when an
FM broadcast is in stereo.
*XL-3500H(E)_QG 02.1.16, 11:18 AM4