ShowPro Atomizer Pro Hazer User manual

Atomizer Pro Hazer
User Manual

1. Introduction
Thank you for choosing the Atomizer Pro Hazer. Now you are the owner of the most advanced
high-performance haze machine. We kindly suggest you read this manual carefully before
using the unit. Abiding by all the instructions will ensure long-term stable and satisfactory
effects.
Please follow the operation, safety, and maintenance instructions to ensure the machine
operates normally and prolongs its usage life.
Important environmental information about this product
•Do not dispose of the unit or batteries as unsorted municipal waste; it should be taken
to a specialized company for recycling.
•This device should be returned to your distributor or to a local recycling service.
•Respect the local environmental rules.
•If there are any doubts, contact with your local waste disposal authorities.
•Thank you for choosing the Atomizer Pro Hazer. If the device was damaged in transit,
don’t install or use it, and contact your dealer.
2. Product Description
Atomizer Pro Hazer is a haze machine different from a traditional hazer. It adopts
high-pressure atomization technology. There is no need for heating, it can be used
immediately once the power is on. The machine uses professional matched fluid and is
suitable for various indoor performances.
Features:
·High-pressure atomization technology
·Sprays dry and thin haze which spreads fast
·Sprays when powered on, no need to heat
up.
·Angle adjustable fan, adjustable fan speed
·Matched with professional fluid

3. Notes Before Use
1. Place the Atomizer Pro Hazer on a stable surface and check whether it is damaged. If
damaged, please contact the supplier at once. Unscrew the lid of the fluid tank to pour in
the high-quality haze fluid, and then fasten the lid.
2. Before you power on, please verify that the supply voltage conforms with the rated voltage
of the haze machine. The power supply should be connected to the grounding wire. When
powered on, the indicator light will turn on, and the haze machine will begin to work.
Connect the machine to different controllers for alternate control options.
3. At first, it is normal if the hazer creates little smoke or a small amount of steam.
4. Place the Atomizer Pro Hazer in a well-ventilated area, otherwise the machine’s
temperature fuse will disconnect and cause the unit to stop heating.
5. Place the Atomizer Pro Hazer on the ground horizontally or install it with the mounting
bracket, ensuring to keep the unit level. There should be a minimum of 30-centimeters
clearance all around the unit. Keep it away from flammable or explosive materials. Keep at
least 40cm away from the nozzle to avoid scalding.
6. Do not let the unit run completely out of fluid. If the smoke machine keeps running when
the fluid is used up, it will cause damage to the pump and heater. Turn off the power before
adding fluid and ensure not to over fill the tank.
7. In the case that the fluid tank is empty, there is noise from the pump, or the machine stops
outputting, please disconnect the power at once, and check the fluid level, fuse, cable, and
power plug. If the problems are still not resolved, please contact dealer.
8. Do not run the haze machine powered and unattended. Always keep clear of children.
9. Due to condensation, vapor or moisture might gather around the nozzle of the machine.
There might be some surplus haze ejected from the haze machine during operation or
after shutdown.
10. Please make sure there is no fluid or metals inside the machine before turning on the
power each time. Do not modify or repair the machine by yourself. If there are any
problems, please contact the dealer.

4. Safety Instructions
•Be very careful during the installation: touching live wires can cause life-threatening
electroshocks.
•Keep this device away from rain and moisture.
•Unplug the mains lead before opening the housing.
•Damage caused by disregarding guidelines in this manual is not covered by the
warranty and the dealer will not bear responsibility for any ensuing defects or
problems.
•A qualified technician should install and service this device.
•Do not switch the device on immediately after it has been exposed to changes in
temperature.
•Protect the device against damage by leaving it switched off until it has reached room
temperature.
•This device falls under protection class one; it is therefore essential that the device be
grounded. Have a qualified person carry out the electric connection.
•Make sure that the available voltage does not exceed the voltage stated in the
specification of this manual.
•Do not crimp the power cord and protect it against damage. Have an authorized dealer
replace it if necessary.
•Disconnect the device from the mains to clean it or when it is not in use. Handle the
power cord by the plug only.
•Note that damage caused by user’s modification to the device is not covered by the
warranty.
•Keep the device away from children and unauthorized users.
5. General Guidelines
•This device is designed for professional use on the stage, in clubs, theaters, etc. The
device should only be used indoors with an alternating current of max. 230V AC/50Hz
•Do not shake the device. Avoid brute force when installing or operating the device.
•Select a location where the device is protected against extreme heat, dust and
moisture.
•Familiarize yourself with the functions of the device before actually using it. Do not
allow operation by unqualified people. Any damage that may occur will most probably
be due to unprofessional use of the device.
•Use the original packaging if the device is to be transported.
•All modification to the device is forbidden for safety reasons.
•Only use the device for its intended purpose. All other usages may lead to short
circuits, burns, electroshocks, crashes, etc. Using the device in an unauthorized way
will void the warranty.
•This device is not suited for permanent operation. Frequent operation breaks will
protect the life span of your haze machine.

6. Installation
•Have the device installed by a qualified person, respecting EN-60598-2-17 and all
other applicable norms.
•The carrying construction must be able to support the weight 10 times as heavy as the
device for 1 hour without deforming.
•Never stand straight below the device when it is being mounted, removed or serviced.
Have a qualified technician check the device once a year and before you bring it into
service.
•Install the device in a location with few passers-by that is inaccessible to unauthorized
persons.
•Adjusted the desired inclination angle via the mounting bracket and tighten the bracket
screws.
•Make sure there are no flammable materials within a 50 cm radius of the device.
•Connect the device to the mains with the power plug.
•The installation must be approved by an expert before the device being taken into
service.
7. Use
The smoke machine is controlled by 2 DMX channels:
Channel 1 = haze output channel
Channel 2 = fan output channel
A. DMX 512 Connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the
other side to the male 2-pin input of the Atomizer Pro Hazer. Multiple Atomizer Pro Hazers can
be linked through serial linking. The linking cable should be two core, screened cable with XLR
input and output connectors, please refer to the diagram above.

B. DMX 512 Chain with Termination
A DMX terminator is recommended for installation where the DMX cable has to run a long
distance or is in an electrically noisy environment (e.g. discos). The terminator prevents
corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR
plug with a 120ohm resistor between pins 2 and 3, which is then plugged into the XLR output
socket of the last device in the chain. Please see the diagram below.
8. Technical Specifications
Power required
AC 220V-240V 50/60HZ
Fuse
5A/250V
Power
500W
Pre-heating time
0min
Smoke output
3000cuft/min
Fluid
Atomizer Fluid: PSHATM125
Tank capacity
3.6L
Oil consumption rate
25h/L
Controller
LCD controller
Fan angle & Wind speed
Adjustable
Weight
35kg
Package size
510*400*360(mm)
DMX-512
Supported