ShowPro Fusion IP Profile FC User manual

FUSION PROFILE IP FC
USER MANUAL
LEDMOV165
®

1 18
®
286.20 mm
812.80 mm 343.44 mm
LEDMOV165
812×343×286(mm)
16KG
240W
AC100~240V
50/60Hz
-20℃~45℃
15°~30°
DMX512/RDM
Product Code
imensonD
Weight
Rated Power
Input Voltage
Frequency Range
Ambient Temperature
Beam Angle
Control Model
1
Product Introduction
1.1 Specification

17 2
ECLIPSE COLOR IP
SS857
®
IMPORTANT
ATTENTION
Caution, risk of electric shock
The light source contained in this luminaire shall only be replaced
by the manufacturer or his service agent or a similar qualified person.
1.2 Safety warning
ATTENTION !!
•This product left the place of manufacture in perfect condition. In order to
maintain this condition and for safe operation, the user must always follow the
instructions and safety warnings described in this user manual.
•Avoid shaking or strong impacts to any part of the equipment.
•Make sure that all parts of the equipment are kept clean and free of dust.
•Always make sure that the power connections are connected correct and
secure.
•If there is any malfunction of the equipment, contact your distributor
immediately.
•When transferring the product, it is advisable to use the original packaging in
which the product left the factory.
•Shields, lenses or ultraviolet screens shall be changed if they have become
damaged to such an extent that their effectiveness is impaired.
•The lamp (LED) shall be changed if it has become damaged or thermally
deformed.
•This product must be installed by a qualified professional.
•Always operate the equipment as described in the user manual.
•A minimum distance of 0.5m must be maintained between the equipment and
combustible surface.
•The product must always be placed in a well ventilated area.
•Always make sure that the equipment is installed securely.
•Do not stand close to the equipment and stare directly into the LED light source.
•Always disconnect the power supply before attempting and maintenance.
•Always make sure that the supporting structure is solid and can support the
combined weight of the products.
•The earth wire must always be connected to the ground.
•Do not touch the power cables if your hands are wet.
Always read the user manual before operation.
Please confirm that the power supply stated on the product is the same as the
mains power supply in your area.

16
3
The DMX address code can be any value between 001and 512.
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
185 209
210 234
235 255
®
2.1 Mounting
2 Installation
The fixture can be mounted in any
position.Always ensure that
mounting surface can withstand 10
times the weight of thefixture.
Always use a safety cable when
mounting the fixture in any elevated
position.
Important safety note!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
2.2 Power connections
This product uses input and output power cable is 1.5 square mm copper wire
Note:
If the signal cable is over 60m between the DMX512 controller and fixture or beween two
fixtures, then a DMX signal amplifier is needed as well.
2.3 Connecting DMX512
The DMX console and the lamp body are connected in series.
Because the Std.P MODE is five channels, the address code of the lamp increases by
5 times such as(1,6,11,16…),also each it can be reused as needed.
CHANNEL VALUE FUNCTION
UPRIGHT

4
15
............
DMX Ad dr.1 DMX Ad dr.6 DMX Ad dr.11
DMX512 control
MENU UP
ENTER DOWN
ŸMENU：Back
ŸENTER：Save
ŸUP：Direction up
ŸDOWN：Direction down
STATIC
ADDRESS
PERSONALITY
RED
001-512
HSIC
SIMPLE
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO
STROBE
0-255
0-255
0-255 0-255
0-255
0-255
0-255
0-255
0-255
0-25
MENU
3.2 Menu
RUN MODE
DMX
SLAVE
COLOR MODE 8BIT
COLOR MODE 16BIT
CCT
000 010
011 030
031 050
NO FUNCTION
2700K
3000K
STROBE FROM SLOD TO FAST (0-25Hz)
NO FUNCTION
THUNDER STROBE
NO FUNCTION
RANDOM STROBE
010 099
100 109
110 179
180 189
190 255
CH.17
CH.18
GOBO ROTATION
CONTROL
NO FUNCTION
GOBO ADJUST THE ANGLE (0 —> 360°)
STOP ROTATION
CLOCKWISE (SPEED 1 —> 100%)
STOP ROTATION
COUNTERCLOCKWISE (SPEED 1 —> 100%)
000 009
010 145
146 150
151 200
201 205
206 255
000 009
010 034
035 059
060 084
085 109
110 134
135 159
160 184
NO FUNCTION
LIVE
STUDIO
POWER
OFF
DIM1
DIM2
DIM3
STROBE
051 070
071 090
091 110
111 130
131 150
151 170
171 190
191 210
211 230
231 255
000 255
000 255
000 009
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
ZOOM
FOCUS
NO FUNCTION
CH.14
CH.15
CH.16
CH.19
ECLIPSE COLOR IP
SS857
®
3.1 Display operation
3 Display panel operation
CHANNEL VALUE FUNCTION
ŸAs shown on the right, the controller is connected to the
lamp body in series, the DMX address code for the first
lamp is set to 1, and second unit is set to 6, and so on.

RED
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO SPEED
TIME
STROBE
FADE
0-255
0-255
0-255 0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-25
0-255
14
5
RUN MODE
MANUAL
DMX
PLAY
SLAVE
ED IT
PROGRAM02
PROGRAM02 SCENE-02
PROGRAM01 SPEED 0-255
SPEED 0-255
SPEED 0-255
PROGRAM01 SCENE-01
PROGRAM10
PROGRAM10 SCENE-30
󴘐 󴘐
󴘐 󴘐
SETTING
INFO
CALIB.C
WIRELESS RESET
KEY
DIMMER
PERFORM
XY OFFSET
PWM
DMX ERROR
RESET
FULL POWER CCT
±200
±200
X FINE
X FINE
Y FINE
Y FINE
OFF
ON
±200
±200
OFF
LIVE
HIDE
DIM1
STUDIO
SHOW
DIM2
POWER
DIM3
DIM4
BLACK
25000Hz
SAVE
****
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
3200K
4200K
5600K
10000K
NORMAL
VERSION
****
RDM
V01
CCT
UID 0x388A xxxx xxxx
LABEL ECLIPSE COLOR IP
WIRELESS YES
NO
OK
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
185 209
210 234
235 255
CH.1
CH.2
CH.3
CH.4
CH.5
CH.6
CH.7
CH.8
CH.9
CH.10
CH.11
CH.12
COLOR MODE 16BIT
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
DIMME
DIMMER FINE
RED
RED FINE
GREEN
GREEN FINE
BLUE
BLUE FINE
AMBER
AMBER FINE
LIME
LIME FINE
PRESET COLOR
000 010
011 020
021 030
031 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 255
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
CH.13
®
CHANNEL VALUE FUNCTION
CHANNEL VALUE FUNCTION

STATIC
RED
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO
STROBE
0-255
0-255
0-255 0-255
0-255
0-255
0-255
0-255
0-255
0-25
6
13
PERSONALITY
HSIC
SIMPLE
COLOR MODE 8BIT
COLOR MODE 16BIT
ADDRESS
001-512
3.3 I SettingSTAT C
3.4 DMX Address Setting
3.5 PERSONALITY Setting
3.6 RUNMODE Setting
MENU
MENU
MENU
MENU
RUN MODE
DMX
SLAVE
CCT
000 010
011 030
031 050
NO FUNCTION
2700K
3000K
STROBE FROM SLOD TO FAST (0-25Hz)
NO FUNCTION
THUNDER STROBE
NO FUNCTION
RANDOM STROBE
010 099
100 109
110 179
180 189
190 255
CH.11
CH.12
GOBO ROTATION
CONTROL
NO FUNCTION
GOBO ADJUST THE ANGLE (0 —> 360°)
STOP ROTATION
CLOCKWISE (SPEED 1 —> 100%)
STOP ROTATION
COUNTERCLOCKWISE (SPEED 1 —> 100%)
000 009
010 145
146 150
151 200
201 205
206 255
000 009
010 034
035 059
060 084
085 109
110 134
135 159
160 184
NO FUNCTION
LIVE
STUDIO
POWER
DIM0
DIM1
DIM2
DIM3
STROBE
051 070
071 090
091 110
111 130
131 150
151 170
171 190
191 210
211 230
231 255
000 255
000 255
000 009
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
ZOOM
FOCUS
NO FUNCTION
CH.8
CH.9
CH.10
CH.13
ECLIPSE COLOR IP
SS857
®
•Enter the【DMX】mode to set the DMX address.
•【 】Enter Up/Down select 1~512 address.
•Enter【MENU】return.
ŸEnter the STATIC mode to create the programs
ŸCombine RED/ GREEN/BLUE/AMBER/LIME/ZOOM/FOCUS/GOBO/STROBE to create a definite
range of colors ,Push up and down buttons adjust 0-255 value,Set value of the STROBE,Push
up and down buttons adjust 0-20Hz value
ŸThe static setting will be valid when the fixture is powered again.
•Press enter the menu to do a custom choice on the ‘PERSONALITY’menu.
•Press UP or DOWN to select 【HISC】,【SIMPLE】,【COLOR MODE 8BIT】,【COLOR MODE
16BIT】,please refer to DMX channel table for the specific channel value .
•【RUNMODE】menu, select required run mode,there are any modes inside:【DMX】DMX
mode,【SLAVE】SLAVE mode, press Down/Up select mode.
•【DMX】 mode is for using the DMX512 controller to control the fixtures.
CHANNEL VALUE FUNCTION

MANUAL
RED
PLAY
ED IT
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO SPEED
TIME
STROBE
FADE
0-255
PROGRAM02
PROGRAM02 SCENE-02
0-255
PROGRAM01 SPEED 0-255
SPEED 0-255
SPEED 0-255
PROGRAM01 SCENE-01
0-255 0-255
0-255
0-255
PROGRAM10
PROGRAM10 SCENE-30
0-255
0-255
󴘐 󴘐
󴘐 󴘐
0-255
0-255
0-25
0-255
12
7
3.7 MANUAL Setting
MENU
Ÿ【MANUAL】,press 【ENTER】, enter into control knob switch set up.
ŸSelect 【PLAY】and press enter to select 【PROGRAM01】 ~ 【PROGRAM10】, the value adjustment
range of each self-programming mode is 0~255, press the 【MENU】 key to return the MENU, and
the selected value is saved automatically.
ŸEnter the EDIT mode to edit the custom programs【PROGRAM01】to 【PROGRAM10】.Each custom
program has 30 steps that can be edited.Each step allows the creation of a scene using RED 【RED】,
GREEN 【GREEN】, BLUE 【BLUE】, AMBER 【AMBER】, LIME 【LIME】, ZOOM 【ZOOM】, FOCUS
【FOCUS】, GOBO ROTA 【GOBO ROTA】, STROBE 【STROBE】, TIME 【TIME】, FADE 【FADE】.The
data value range【0~255】 is in seconds,The TIME setting of 【FADE 】 is less than that of 【 TIM
E】,press the 【MENU】 key to return the MENU, and the selected value is saved automatically.
110 134
135 159
160 184
185 209
210 234
235 255
DIM1
DIM2
DIM3
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
COLOR MODE 8BIT
000 255
000 255
000 255
000 255
000 255
000 255
DIMME
RED
GREEN
BLUE
AMBER
LIME
CH.1
CH.2
CH.3
CH.4
CH.5
CH.6
PRESET COLOR
000 010
011 020
021 030
031 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 255
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
CH.7
®
CHANNEL VALUE FUNCTION
CHANNEL VALUE FUNCTION
•【SLAVE】 mode is for Master -- Slave operation.
•press【ENTER】accept,press【MENU】return.

10000K
811
PERFORM
XY OFFSET
PWM
DMX ERROR
RESET
FULL POWER CCT
±200
X FINE
Y FINE ±200
LIVE
HIDE
STUDIO
SHOW
POWER
DIM4
BLACK
25000Hz
SAVE
**** OK
3200K
4200K
5600K
NORMAL
Ÿ【SET】...This menu allows the user to adjust key operation settings for this fixture.
Ÿ【KEY】 ... select [ON] for automatic lock-out. Password to re-enter the display is <UP>+ <DOWN>
+ <UP> + <DOWN>.
Ÿ【DIMMER】is a non-linear DIMMER speed setting，<OFF> is a normal linear dimming，Select
[DIM1]、 [DIM2]、 [DIM3] or [DIM4] for different dimming speeds. ([DIM4] is the slowest dimming
speed).
Ÿ【PERFORM】menu, select【LIVE/STUDIO/POWER】as required fan speed.
Ÿ【XY OFFSET】is the setting to hide the fine adjustment of the refresh frequency, select, 【SHOW】
as not hidden, select【HIDE】as hidden, The default setting is【HIDE】.
Ÿ【PWM】 is the PWM refresh frequency selection. When the [XY OFFSET] option is SHOW, the PWM
submenu can set X FINE and Y FINE tuning options. (Note: as the refresh frequency increases, the
gray scale level of the dimmer will decrease (i.e. the higher the refresh frequency, the less gray it
will be).
Ÿ【FULL POWER CCT】 is the color temperature choose bottom, press UP/DOWN to choose, under
full power, <3200K>、<4200K>、<5600K> 、<10000K> can be chosen, when choose <COLOR>,
<3200K>、<4200K>、<5600K> 、<10000K>are not work, but choose <NORMAL>. <NORMAL> is
the default initial setting.
Ÿ【DMX ERROR】 Choose<SAVE> in order to save the last DMX data in case of DMX signal error.
Choose<BLACK> in order to blackout in case of DMX signal error.
Ÿ【RESET】 RESET the lamp. Enter the password "up down up down " to confirm, and then perform
the RESET of the lamp parameters.
SETTING
KEY
DIMMER
OFF
ON
OFF
DIM1
DIM2
DIM3
MENU
3.8 SETTING
SIMPLE
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
DIMMER
RED
GREEN
BLUE
AMBER
LIME
ZOOM
FOCUS
CH.1
CH.2
CH.3
CH.4
CH.5
CH.6
CH.7
CH.8
CONTROL
CH.8
201 205
206 255
STOP ROTATION
COUNTERCLOCKWISE (SPEED 1 —> 100%)
NO FUNCTION
LIVE
STUDIO
POWER
DIM0
DIM1
DIM2
DIM3
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
STROBE
CONTROL
000 009
010 099
100 109
110 179
180 189
190 255
NO FUNCTION
STROBE FROM SLOD TO FAST (0-25Hz)
NO FUNCTION
THUNDER STROBE
NO FUNCTION
RANDOM STROBE
CH.9
CH.10
NO FUNCTION
LIVE
STUDIO
POWER
OFF
000 009
010 034
035 059
060 084
085 109
ECLIPSE COLOR IP
SS857
®
000 009
010 034
035 059
060 084
085 109
110 134
135 159
160 184
185 209
210 234
235 255
CHANNEL VALUE FUNCTION

0x388A xxxx xxxx
109
MENU
MENU
MENU
3.9 CALIB.CCT
CALIB.C
±200
X FINE
Y FINE ±200
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
**** CCT
ŸPress【ENTER】to enter the 【CALIB.CCT】White light temperature setting, then press
DOWN/UP key to select the value of color temperature under the full power【2700
K】、【3000K】、【3200K】、【3500K】、【4000K】、【4200K】、【4500K】、
【5600K】、【6000K】、【6500K】、【7200K】、【8000K】,you can press DOWN
or UP to select【X FINE】or【Y FINE】,then select the value±200,if you need to adjust
the color temperature.
INFO
VERSION
RDM
V01
UID
LABEL ECLIPSE COLOR IP
WIRELESS RESET
WIRELESS YES
NO
3.10 W Setting IRELESS
Ÿ【WIRELESS】 WIRELESS DMX mode, press 【ENTER】key to ENTER, 【WIRELESS RESET】
WIRELESS DMX RESET, select YES as RESET, and NO as NO RESET.
3.11 INFO
HISC
000 255
000 255
000 255
000 255
INTENSIYT
HUE
HUE FINE
SATURATION
CH.1
CH.2
CH.3
CH.4
CCT
CH.5
NO FUNCTION
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
STROBE
GOBO ROTATION
000 009
010 099
100 109
110 179
180 189
190 255
NO FUNCTION
STROBE FROM SLOD TO FAST (0-25Hz)
NO FUNCTION
THUNDER STROBE
NO FUNCTION
RANDOM STROBE
CH.6
CH.7
000 009
010 145
146 150
151 200
000 010
011 030
031 050
051 070
071 090
091 110
111 130
131 150
151 170
171 190
191 210
211 230
231 255
NO FUNCTION
GOBO ADJUST THE ANGLE (0 —> 360°)
STOP ROTATION
CLOCKWISE (SPEED 1 —> 100%)
®
•Press【ENTER】into【INFO】check information，press up and down
•【VERSION】is software versions；
•【RDM】check fixture's ID；
4Using a DMX512 Controller
4.1 Channel Assignment
Note: this product have four DMX512 channel configuration:
【HISC】/【SIMPLE】/【COLOR MODE 8BIT】/【COLOR MODE 16BIT】
CHANNEL VALUE FUNCTION

0x388A xxxx xxxx
109
MENU
MENU
MENU
3.9 CALIB.CCT
CALIB.C
±200
X FINE
Y FINE ±200
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
**** CCT
ŸPress【ENTER】to enter the 【CALIB.CCT】White light temperature setting, then press
DOWN/UP key to select the value of color temperature under the full power【2700
K】、【3000K】、【3200K】、【3500K】、【4000K】、【4200K】、【4500K】、
【5600K】、【6000K】、【6500K】、【7200K】、【8000K】,you can press DOWN
or UP to select【X FINE】or【Y FINE】,then select the value±200,if you need to adjust
the color temperature.
INFO
VERSION
RDM
V01
UID
LABEL ECLIPSE COLOR IP
WIRELESS RESET
WIRELESS YES
NO
3.10 W Setting IRELESS
Ÿ【WIRELESS】 WIRELESS DMX mode, press 【ENTER】key to ENTER, 【WIRELESS RESET】
WIRELESS DMX RESET, select YES as RESET, and NO as NO RESET.
3.11 INFO
HISC
000 255
000 255
000 255
000 255
INTENSITY
HUE
HUE FINE
SATURATION
CH.1
CH.2
CH.3
CH.4
CCT
CH.5
NO FUNCTION
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
STROBE
GOBO ROTATION
000 009
010 099
100 109
110 179
180 189
190 255
NO FUNCTION
STROBE FROM SLOW TO FAST (0-25Hz)
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM STROBE
CH.6
CH.7
000 009
010 145
146 150
151 200
000 010
011 030
031 050
051 070
071 090
091 110
111 130
131 150
151 170
171 190
191 210
211 230
231 255
NO FUNCTION
GOBO INDEX(0 —> 360°)
STOP ROTATION
CLOCKWISE (SPEED 1 —> 100%)
ECLIPSE COLOR IP
SS857
®
•Press【ENTER】into【INFO】check information，press up and down
•【VERSION】is software versions；
•【RDM】check fixture's ID；
4 Using a DMX512 Controller
4.1 Channel Assignment
Note: this product have four DMX512 channel configuration:
【HISC】/【SIMPLE】/【COLOR MODE 8BIT】/【COLOR MODE 16BIT】
CHANNEL VALUE FUNCTION

10000K
811
PERFORM
XY OFFSET
PWM
DMX ERROR
RESET
FULL POWER CCT
±200
X FINE
Y FINE ±200
LIVE
HIDE
STUDIO
SHOW
POWER
DIM4
BLACK
25000Hz
SAVE
**** OK
3200K
4200K
5600K
NORMAL
Ÿ【SET】...This menu allows the user to adjust key operation settings for this fixture.
Ÿ【KEY】 ... select [ON] for automatic lock-out. Password to re-enter the display is <UP>+ <DOWN>
+ <UP> + <DOWN>.
Ÿ【DIMMER】is a non-linear DIMMER speed setting，<OFF> is a normal linear dimming，Select
[DIM1]、 [DIM2]、 [DIM3] or [DIM4] for different dimming speeds. ([DIM4] is the slowest dimming
speed).
Ÿ【PERFORM】menu, select【LIVE/STUDIO/POWER】as required fan speed.
Ÿ【XY OFFSET】is the setting to hide the fine adjustment of the refresh frequency, select, 【SHOW】
as not hidden, select【HIDE】as hidden, The default setting is【HIDE】.
Ÿ【PWM】 is the PWM refresh frequency selection. When the [XY OFFSET] option is SHOW, the PWM
submenu can set X FINE and Y FINE tuning options. (Note: as the refresh frequency increases, the
gray scale level of the dimmer will decrease (i.e. the higher the refresh frequency, the less gray it
will be).
Ÿ【FULL POWER CCT】 is the color temperature choose bottom, press UP/DOWN to choose, under
full power, <3200K>、<4200K>、<5600K> 、<10000K> can be chosen, when choose <COLOR>,
<3200K>、<4200K>、<5600K> 、<10000K>are not work, but choose <NORMAL>. <NORMAL> is
the default initial setting.
Ÿ【DMX ERROR】 Choose<SAVE> in order to save the last DMX data in case of DMX signal error.
Choose<BLACK> in order to blackout in case of DMX signal error.
Ÿ【RESET】 RESET the lamp. Enter the password "up down up down " to confirm, and then perform
the RESET of the lamp parameters.
SETTING
KEY
DIMMER
OFF
ON
OFF
DIM1
DIM2
DIM3
MENU
3.8 SETTING
SIMPLE
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
DIMMER
RED
GREEN
BLUE
AMBER
LIME
ZOOM
FOCUS
CH.1
CH.2
CH.3
CH.4
CH.5
CH.6
CH.7
CH.8
CONTROL
CH.8
201 205
206 255
STOP ROTATION
COUNTERCLOCKWISE (SPEED 1 —> 100%)
NO FUNCTION
LIVE
STUDIO
POWER
DIM0
DIM1
DIM2
DIM3
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
STROBE
CONTROL
000 009
010 099
100 109
110 179
180 189
190 255
NO FUNCTION
STROBE FROM SLOW TO FAST (0-25Hz)
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM STROBE
CH.9
CH.10
NO FUNCTION
LIVE
STUDIO
POWER
OFF
000 009
010 034
035 059
060 084
085 109
®
000 009
010 034
035 059
060 084
085 109
110 134
135 159
160 184
185 209
210 234
235 255
CHANNEL VALUE FUNCTION

MANUAL
RED
PLAY
ED IT
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO SPEED
TIME
STROBE
FADE
0-255
PROGRAM02
PROGRAM02 SCENE-02
0-255
PROGRAM01 SPEED 0-255
SPEED 0-255
SPEED 0-255
PROGRAM01 SCENE-01
0-255 0-255
0-255
0-255
PROGRAM10
PROGRAM10 SCENE-30
0-255
0-255
0-255
0-255
0-25
0-255
12
7
3.7 MANUAL Setting
MENU
Ÿ【MANUAL】,press 【ENTER】, enter into control knob switch set up.
ŸSelect 【PLAY】and press enter to select 【PROGRAM01】 ~ 【PROGRAM10】, the value adjustment
range of each self-programming mode is 0~255, press the 【MENU】 key to return the MENU, and
the selected value is saved automatically.
ŸEnter the EDIT mode to edit the custom programs【PROGRAM01】to 【PROGRAM10】.Each custom
program has 30 steps that can be edited.Each step allows the creation of a scene using RED 【RED】,
GREEN 【GREEN】, BLUE 【BLUE】, AMBER 【AMBER】, LIME 【LIME】, ZOOM 【ZOOM】, FOCUS
【FOCUS】, GOBO ROTA 【GOBO ROTA】, STROBE 【STROBE】, TIME 【TIME】, FADE 【FADE】.The
data value range【0~255】 is in seconds,The TIME setting of 【FADE 】 is less than that of 【 TIM
E】,press the 【MENU】 key to return the MENU, and the selected value is saved automatically.
110 134
135 159
160 184
185 209
210 234
235 255
DIM1
DIM2
DIM3
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
COLOR MODE 8BIT
000 255
000 255
000 255
000 255
000 255
000 255
DIMMER
RED
GREEN
BLUE
AMBER
LIME
CH.1
CH.2
CH.3
CH.4
CH.5
CH.6
PRESET COLOR
000 010
011 020
021 030
031 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 255
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
CH.7
ECLIPSE COLOR IP
SS857
®
CHANNEL VALUE FUNCTION
CHANNEL VALUE FUNCTION
•【SLAVE】 mode is for Master -- Slave operation.
•press【ENTER】accept,press【MENU】return.

STATIC
RED
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO
STROBE
0-255
0-255
0-255 0-255
0-255
0-255
0-255
0-255
0-255
0-25
6
13
PERSONALITY
HSIC
SIMPLE
COLOR MODE 8BIT
COLOR MODE 16BIT
ADDRESS
001-512
3.3 I SettingSTAT C
3.4 DMX Address Setting
3.5 PERSONALITY Setting
3.6 RUNMODE Setting
MENU
MENU
MENU
MENU
RUN MODE
DMX
SLAVE
CCT
000 010
011 030
031 050
NO FUNCTION
2700K
3000K
STROBE FROM SLOW TO FAST (0-25Hz)
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM STROBE
010 099
100 109
110 179
180 189
190 255
CH.11
CH.12
GOBO ROTATION
CONTROL
NO FUNCTION
GOBO INDEX(0 —> 360°)
STOP ROTATION
CLOCKWISE (SPEED 1 —> 100%)
STOP ROTATION
COUNTERCLOCKWISE (SPEED 1 —> 100%)
000 009
010 145
146 150
151 200
201 205
206 255
000 009
010 034
035 059
060 084
085 109
110 134
135 159
160 184
NO FUNCTION
LIVE
STUDIO
POWER
DIM0
DIM1
DIM2
DIM3
STROBE
051 070
071 090
091 110
111 130
131 150
151 170
171 190
191 210
211 230
231 255
000 255
000 255
000 009
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
ZOOM
FOCUS
NO FUNCTION
CH.8
CH.9
CH.10
CH.13
®
•Enter the【DMX】mode to set the DMX address.
•【 】Enter Up/Down select 1~512 address.
•Enter【MENU】return.
ŸEnter the STATIC mode to create the programs
ŸCombine RED/ GREEN/BLUE/AMBER/LIME/ZOOM/FOCUS/GOBO/STROBE to create a definite
range of colors ,Push up and down buttons adjust 0-255 value,Set value of the STROBE,Push
up and down buttons adjust 0-20Hz value
ŸThe static setting will be valid when the fixture is powered again.
•Press enter the menu to do a custom choice on the ‘PERSONALITY’menu.
•Press UP or DOWN to select 【HISC】,【SIMPLE】,【COLOR MODE 8BIT】,【COLOR MODE
16BIT】,please refer to DMX channel table for the specific channel value .
•【RUNMODE】menu, select required run mode,there are any modes inside:【DMX】DMX
mode,【SLAVE】SLAVE mode, press Down/Up select mode.
•【DMX】 mode is for using the DMX512 controller to control the fixtures.
CHANNEL VALUE FUNCTION

RED
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO SPEED
TIME
STROBE
FADE
0-255
0-255
0-255 0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-25
0-255
14
5
RUN MODE
MANUAL
DMX
PLAY
SLAVE
ED IT
PROGRAM02
PROGRAM02 SCENE-02
PROGRAM01 SPEED 0-255
SPEED 0-255
SPEED 0-255
PROGRAM01 SCENE-01
PROGRAM10
PROGRAM10 SCENE-30
SETTING
INFO
CALIB.C
WIRELESS RESET
KEY
DIMMER
PERFORM
XY OFFSET
PWM
DMX ERROR
RESET
FULL POWER CCT
±200
±200
X FINE
X FINE
Y FINE
Y FINE
OFF
ON
±200
±200
OFF
LIVE
HIDE
DIM1
STUDIO
SHOW
DIM2
POWER
DIM3
DIM4
BLACK
25000Hz
SAVE
****
2700K
3000K
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
3200K
4200K
5600K
10000K
NORMAL
VERSION
****
RDM
V01
CCT
UID 0x388A xxxx xxxx
LABEL ECLIPSE COLOR IP
WIRELESS YES
NO
OK
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
185 209
210 234
235 255
CH.1
CH.2
CH.3
CH.4
CH.5
CH.6
CH.7
CH.8
CH.9
CH.10
CH.11
CH.12
COLOR MODE 16BIT
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
000 255
DIMME
DIMMER FINE
RED
RED FINE
GREEN
GREEN FINE
BLUE
BLUE FINE
AMBER
AMBER FINE
LIME
LIME FINE
PRESET COLOR
000 010
011 020
021 030
031 040
041 050
051 060
061 070
071 080
081 090
091 100
101 110
111 120
121 130
131 140
141 150
151 160
161 170
171 255
NO FUNCTION
L106
R05
L194
R54
L019
R08
R89
R86
L213
R377
R80
L202
L328
R3314
L101
L768
NO FUNCTION
CH.13
ECLIPSE COLOR IP
SS857
®
CHANNEL VALUE FUNCTION
CHANNEL VALUE FUNCTION

4
15
............
DMX Ad dr.1 DMX Ad dr.6 DMX Ad dr.11
DMX512 control
MENU UP
ENTER DOWN
ŸMENU：Back
ŸENTER：Save
ŸUP：Direction up
ŸDOWN：Direction down
STATIC
ADDRESS
PERSONALITY
RED
001-512
HSIC
SIMPLE
GREEN
BLUE
AMBER
LIME
ZOOM
FOUCUS
GOBO
STROBE
0-255
0-255
0-255 0-255
0-255
0-255
0-255
0-255
0-255
0-25
MENU
3.2 Menu
RUN MODE
DMX
SLAVE
COLOR MODE 8BIT
COLOR MODE 16BIT
CCT
000 010
011 030
031 050
NO FUNCTION
2700K
3000K
STROBE FROM SLOW TO FAST (0-25Hz)
NO FUNCTION
LIGHTNING STROBE
NO FUNCTION
RANDOM STROBE
010 099
100 109
110 179
180 189
190 255
CH.17
CH.18
GOBO ROTATION
CONTROL
NO FUNCTION
GOBO INDEX(0 —> 360°)
STOP ROTATION
CLOCKWISE (SPEED 1 —> 100%)
STOP ROTATION
COUNTERCLOCKWISE (SPEED 1 —> 100%)
000 009
010 145
146 150
151 200
201 205
206 255
000 009
010 034
035 059
060 084
085 109
110 134
135 159
160 184
NO FUNCTION
LIVE
STUDIO
POWER
OFF
DIM1
DIM2
DIM3
STROBE
051 070
071 090
091 110
111 130
131 150
151 170
171 190
191 210
211 230
231 255
000 255
000 255
000 009
3200K
3500K
4000K
4200K
4500K
5600K
6000K
6500K
7200K
8000K
ZOOM
FOCUS
NO FUNCTION
CH.14
CH.15
CH.16
CH.19
®
3.1 Display operation
3Display panel operation
CHANNEL VALUE FUNCTION
ŸAs shown on the right, the controller is connected to the
lamp body in series, the DMX address code for the first
lamp is set to 1, and second unit is set to 6, and so on.

16
3
2.3 The control station setting of connecting DMX512
The DMX console and the lamp body are connected in series.
Because the Std.P MODE is five channels, the address code of the lamp increases by
5 times such as(1,6,11,16…),also each it can be reused as needed.
The DMX address code can be any value between 001and 512.
DIM4
ZOOM、FOCUS、GOBO RESET
NO FUNCTION
185 209
210 234
235 255
ECLIPSE COLOR IP
SS857
®
2.1 Mounting
2Installation
The fixture can be mounted in any
position.Always ensure that
mounting surface can withstand 10
times the weight of thefixture.
Always use a safety cable when
mounting the fixture in any elevated
position.
Important safety note!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
2.2 Power connections
This product uses input and output power cable is 1.5 square mm copper wire
Note:
If the signal cable is over 60m between the DMX512 controller and fixture or beween two
fixtures, then a DMX signal amplifier is needed as well.
CHANNEL VALUE FUNCTION
UPRIGHT

17 2
®
IMPORTANT
ATTENTION
Caution, risk of electric shock
The light source contained in this luminaire shall only be replaced
by the manufacturer or his service agent or a similar qualified person.
1.2 Safety warning
ATTENTION !!
•This product left the place of manufacture in perfect condition. In order to
maintain this condition and for safe operation, the user must always follow the
instructions and safety warnings described in this user manual.
•Avoid shaking or strong impacts to any part of the equipment.
•Make sure that all parts of the equipment are kept clean and free of dust.
•Always make sure that the power connections are connected correct and
secure.
•If there is any malfunction of the equipment, contact your distributor
immediately.
•When transferring the product, it is advisable to use the original packaging in
which the product left the factory.
•Shields, lenses or ultraviolet screens shall be changed if they have become
damaged to such an extent that their effectiveness is impaired.
•The lamp (LED) shall be changed if it has become damaged or thermally
deformed.
•This product must be installed by a qualified professional.
•Always operate the equipment as described in the user manual.
•A minimum distance of 0.5m must be maintained between the equipment and
combustible surface.
•The product must always be placed in a well ventilated area.
•Always make sure that the equipment is installed securely.
•Do not stand close to the equipment and stare directly into the LED light source.
•Always disconnect the power supply before attempting and maintenance.
•Always make sure that the supporting structure is solid and can support the
combined weight of the products.
•The earth wire must always be connected to the ground.
•Do not touch the power cables if your hands are wet.
Always read the user manual before operation.
Please confirm that the power supply stated on the product is the same as the
mains power supply in your area.

1 18
ECLIPSE COLOR IP
SS857
®
286.20 mm
812.80 mm 343.44 mm
SS857XALT
812×343×286(mm)
16KG
240W
AC100~240V
50/60Hz
-20℃~45℃
15°~30°
DMX512/RDM
Product Code
imensonD
Weight
Rated Power
Input Voltage
Frequency Range
Ambient Temperature
Beam Angle
Control Model
1
Product Introduction
1.1 Specification

MODEL:SS857XALT
RD-SS857-SM-02(SS-I)
广州市雅江光电设备有限公司
Guangzhou Yajiang Photoelectric Equipment Ltd.
电 话/Tel：[phone]
传真/Fax：[phone]
邮箱/E-mail：[e-mail]
网址/Website：www.yajiang.cn
ECLIPSE COLOR IP
USER MANUAL
ECLIPSE COLOR IP
SS857
®