ShowPro LED UP Quad-4 User manual

LED UP Quad-4
1
User Manual
www.showtech.com.au
Table of Contents

LED UP Quad-4
2
1. Safety instructions…………………………………………………………3
1.1 Power Connection ………………………………….……………….4
1.2 Overhead Rigging …………………………………………………...4
1.3 Cleaning and Maintenance ………………………………………6
2. Menu Navigation .…………………………………………………………7
3. DMX Allocation….………………………………………………………….11
4. Technical Specifications ……………………….……………………….15

LED UP Quad-4
3
1. Safety Instructions
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature.
Avoid exposing it to direct to rays of sun.
Operate only between 41°F/5°C and 95°F/35°C.
Keep away from humidity, water and dust.
Do not place the use in a location with high humidity or lots of dust.
It is ideal to use the Hercules away from such equipment:
Transformer motor, tuner, TV set and amplifier.
Avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a dry cloth to wipe off dust, or a wet soft cloth for stubborn dirt.
NO USER SERVICABLE PARTS INSIDE.
If unit is out of service, please contact your point of purchase.
If any troubles arise, remove the power plug and contact your ShowPro
representative for repair. Do not open the machine by yourself, it might result a
danger of electric shock.
Take care with the power cable. Never pull the power cable to remove the plug from
the receptacle,be sure to hold the plug.
When not using the unit for an extended period of time be sure to disconnect the
plug form the receptacle.

LED UP Quad-4
4
1.1 Power Connection
AC Power This producthas an auto-ranging power supply that can work with an
input voltage range of 100–240 VAC
AC Plug
1.2 OverheadRigging
This item must be built in a way that it can hold 10 times more of its weight for 1
hour without causing any damage. The installation must be secured with a secondary
safety attachment. The Safety attachment has to be constructed in a way that no
part of the installation can fall. When rigging, de-rigging or servicing the fixture
ensure that the area below is secure. Before putting the device into operation, the
installation must be approved by an expert.The operator has to make sure that
safety-relating and machine-technical installations are approved by a skilled person
once a year.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE.
Including (but not limited to) calculating working load limits, installation material
being used, and periodic safety inspection of all installation material and the
projector. If you lack these qualifications, do not attempt the installations yourself,
but instead use a professional structural rigger. Improper installation can result in
bodily injury and/or damage to property.
Use only professional trussing system if the item is to be lowered from the ceiling or
high joists. Never let the device swing freely in a room.
Connection
Wire
AC Live
Brown
AC Neutral
Blue
AC Ground
Green/Yellow

LED UP Quad-4
5
CAUTION: Overhead Items may cause serious injuries when not installed correctly!! If
there is concern about the safety DO NOT INSTALL the device.
DANGER OF FIRE!
When installing the device, make sure there is no highly-flammable material
(decoration articles, etc.) within a distance of min. 0.5m.
Mount the projector with the mounting bracket to your trussing system using an
appropriate clamp.
For overhead use, always install a rated safety - wire that can hold at least 10 times
the weight of the fixture. You must only use rated safety –wire with quick links with
screw cap. Pull the rated safety - wire through the hole in the mounting bracket and
over the trussing system or a safe fixation spot. Insert the end in the quick link and
tighten the safety screw. The maximum drop distance must never exceed 20cm
A safety - wire which has already held the strain of a fall or which is defective must
not be used again.
IMPORTANT!
Before taking into operation for the first time, the installation has to be approved by
an expert.

LED UP Quad-4
6
1.3 Cleaning and Maintenance
Please make sure that safety-relating and machine-technical installations are inspected by a
skilledperson once a year.
1. Make sure before installing that all screws are tightly connected and not corroded.
2. There must be no deformations on the housings, fixations and installations spots
3. Any defects on the electronics, power cables or housing must be repaired for safe
use.
If the exterior of the unit is going to be cleaned, please use moist, lint free cloths. Never use
alcohol or solvents.
The Cooling fan must be cleaned monthly and check to ensure it is free of obstructions.
To cleanthe interior of the device please use a vacuum cleaner or an air jet, however we
recommend cleaning the lenses weekly to ensure the best output from your unit.

LED UP Quad-4
7
2.0 MenuNavigation
NO.
Menu Level 1
Menu Level 2
Menu Level 3
Remark
1
4
-
C
H
d
1
d
5
1
2
（Default:10CH，d
1）
2
6
-
C
H
d
1
d
5
1
2
3
1
0
C
H
d
1
d
5
1
2
4
C
-
-
Color
C
1
2
3
4
5
6
7
8
9
1
0
1
1
1:R
2:G
3:B
4:W
5:GB
6:RB
7:RG
8:RGB
9:RW
10:GW
11:BW

LED UP Quad-4
8
1
2
1
3
1
4
1
5
12:RGW
13:RBW
14:GBW
15:RGBW (Default：
RGBW)
5
P
-
-
Programs
P
1
P
2
P
3
P
4
Default：P 1
6
S
-
-
Program Speed
S
1
S
1
0
0
（Default：S100）
7
S
n
d
Sound-Active
Mode
8
S
e
n
S
Sound
Sensitivity
u
0
u
1
0
0
（Default：80）

LED UP Quad-4
9
9
U
-
-
User colors
regulate
r
0
2
5
5
g
0
2
5
5
b
0
2
5
5
W
0
2
5
5
（Default
RGBW=255）
10
d
I
M
Dimmer speed
setting
O
F
F
d
I
M
1
d
I
M
2
d
I
M
3
Default：OFF
11
S
E
T
O
n
O
F
F
12
S
-
t
r
2.4G WiFi
Setting
d
r
A
S
d
r
A
U
drAS : Wireless
Automatically
Receive
d
r
C
H
d
r
1
1
6
drCH: Wireless
Manual Receive

LED UP Quad-4
10
(Default：dr 1)
d
t
A
S
d
t
A
U
dtAS
d
t
C
H
d
t
1
1
6
dtCH
1）The signal points is at the lower right corner of display
screen, the status prompt of 2.4G WIFI is flashing.
2）Automaticcode button to proceed to the automatic
mode to be effective

LED UP Quad-4
11
3.0 DMX Allocation
4-CH
Function
Value
Percent/Setting
1
Red
000-255
0~100%
2
Green
000-255
0~100%
3
Blue
000-255
0~100%
4
White
000-255
0~100%
6-CH
Function
Value
Percent/Setting
1
Dimmer
000-255
0~100%
2
Red
000-255
0~100%
3
Green
000-255
0~100%
4
Blue
000-255
0~100%
5
white
000-255
0~100%
6
strobe
000-010
011-255
NO Function
Strobe slow to fast
10-
CH
Function
Value
Percent/Setting
1
Dimmer
000-255
0~100%
2
Red
000-255
0~100%
3
Green
000-255
0~100%
4
Blue
000-255
0~100%
5
White
000-255
0~100%
Manual Color
+ Color
Temperature
000~010
011~030
031~050
051~070
071~090
091~110
111~130
131~150
151~170
171~200
No Function
R 100%, G 0~100%, B 0%
R 100%~0%, G 100%, B 0%
R 0%, G 100%, B 0~100%
R 0% G 100%~0% B 100%
R 0%~100% G 0% B 100%
R 100% G 0% B 100%~0%
R 100% G 0%~100% B 0%~100%
R 100%~0% G 100%~0% B 100%
R 100% G 100% B 100% W100%

LED UP Quad-4
12
6
201~205
206~210
211-215
216-220
221-225
226-230
231-235
236-240
241-245
246-250
251-255
Color temperature1
Color temperature2
Color temperature3
Color temperature4
Color temperature5
Color temperature6
Color temperature7
Color temperature8
Color temperature9
Color temperature10
Color temperature11
7
strobe
000-010
011-255
NO Function
Strobe slow to fast
8
Auto/
Sound
Programs
000-010
011-060
061-120
121-180
181-240
241-255
No Function
AutoProgram 1
AutoProgram 2
AutoProgram 3
AutoProgram 4
Sound Show
9
Auto Speed
000-255
Speed Slow to Fast
10
Dim Mode
000-051
052-101
102-152
153-203
204-255
Presetdimmerspeedfrom display menu
Dimmer speedmode off
Dimmer speed mode1(fastspeed)
Dimmer speedmode2(middle speed)
Dimmer speed mode3(slow speed)

LED UP Quad-4
13
N
O.
KEY
FUNCTI
ON
Step 1
Step 2
Ste
p 3
Description
1
BLACKOUT
BLACKOUT
Any key-
press
Press “BLACKOUT”, press other keys are
invalid, power is not saved.
2
STROBE
STROBE
+/-
Strobe(power save)
Available for ：
AUTO/SOUND/STOBE/FADE/MANUAL/RGBA
UVW/Number：0-9
3
SPEED
SPEED
+/-
Auto program speed
4
SENSITIVITY
SENSITIVITY
+/-
Available for Sound mode
5
%
%
+/-
Available for ：
AUTO/SOUND/STOBE/FADE/MANUAL/RGBA
UVW/Number：0-9
6
+/-
AUTO/SOU
ND/ STOBE
/SPEED/
SENSITIVITY
/% /FADE/
MANUNAL/
RGBAUVW
+、-
7
AUTO
Functio
n 1
AUTO
+/-
Auto program mode
Functio
n 2
AUTO
SPEED
+/-
Auto program speed
Functio
n 3
AUTO
STROBE
+/-
Auto program strobe
Functio
n 4
AUTO
%
+/-
8
SOUND
Functio
n 1
SOUND
+/-
Sound mode
Functio
n 2
SOUND
SENSITIVIT
Y
+/-
Functio
n 3
SOUND
STROBE
+/-
Functio
n 4
SOUND
%
+/-
9
FADE
Functio
n 1
FADE
+/-
Fade mode
Functio
n 2
FADE
SPEED
+/-
Functio
n 3
FADE
STROBE
+/-
Functio
n 4
FADE
%
+/-
10
MANUAL
Functio
n 1
MANUAL
R/G/B/A/UV/W
Functio
n 2
MANUAL
+/-
Display your current R/G/B/A/UV/W value
Functio
n 3
MANUAL
R/G/B/A/
P/W
+/-
Choose your desire R/G/B/A/UV/W value
Functio
n 4
MANUAL
STROBE
+/-
Strobe speed

LED UP Quad-4
14
Functio
n 5
MANUAL
%
+/-
11
R/G/B/A/U
V/W
Functio
n 1
R/G/B/A/U
V/W
+/-
Functio
n 2
R/G/B/A/U
V/W
STROBE
+/-
R：red；G：green；B：blue；A：amber；UV：purple；W：white；
12
Number:0-9
Functio
n 1
Number:0-9
The color on IRC is match with the lighting
color.
Functio
n 2
Number:0-9
STROBE
Functio
n 3
Number:0-9
%
+/-

LED UP Quad-4
15
4.0 Technical Specifications
OPTICS
LED Specification
4x10W RGBW
LED quantity
4
FieldAngle
30°
Beam Angle
15°
Output
10W
Control
Control method
DMX
WDMX Compatibility
N/A
DMX Channels
4,6 and 10
DimmingCurves
4 Modes
DimmingResolution
16 bit
Data Connections
3 Pin XLR
Electrical
Battery Specifications
14.8V, Lithium
WorkingHours
12 hours (colorchange
mode), 8 hours (permanent white full-on)
Charging hours
5 Hours
Input Voltage AC
100V-240V AC 50/60 Hz auto-ranging
Power Consumption
N/A
Fuse
T2A/250V
Physical
Weight
3.4Kg

LED UP Quad-4
16
Size
137x191x145 mm
CoolingSystem
N/A
IP Rating
N/A