Shuttle AV14 User manual

AV14
PPGA Celeron processor
Based AGP MAIN BOARD
User's Manual

M352
Shuttle AV14
PPGA Celeron processor based AGPset Mainboard
Manual Version 1.1
Copyright
Copyright©2000 by Shuttle Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without
prior written permission from Shuttle Inc.
Disclaimer
Shuttle Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
persion of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Spacewalker is a registered trademark of Shuttle Inc.
Intel, Pentium is a registered trademarks of Intel Corporation.
VIA is a registered trademarks of VIA Corporation.
PC/AT is a registered trademark of International Business Machines (IBM) Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other brand and product names used herein are for identification
purposes only and may be trademarks of their respective owners.

- 1 -
WHAT’S IN THE MANUAL ........................................................................4
Quick Reference .......................................................................................................... 4
About This Manual ...................................................................................................... 4
Technical Support ....................................................................................................... 4
1 INTRODUCTION......................................................................................5
1.1 TO DIFFERENT USERS ....................................................................................... 5
FIRST-TIME DIY SYSTEM BUILDER............................................................ 5
EXPERIENCED DIY USER ............................................................................. 5
SYSTEM INTEGRATOR .................................................................................. 5
1.2 ITEM CHECKLIST.................................................................................................. 6
2 FEATURES ..............................................................................................7
2.1 SPECIFICATIONS.................................................................................................. 7
3HARDWAREINSTALLATION............................................................. 10
3.1 STEP BY STEP INSTALLATION ......................................................................10
Accessories Of AV14 ......................................................................................10
STEP 1 Install the CPU...................................................................................11
STEP 2 Set Jumpers.......................................................................................12
STEP 3 Install SDRAM System Memory.....................................................12
STEP 4 Install Internal Peripherals in System Case..................................13
STEP 5 Mount the Mainboard on the Computer Chassis.........................14
STEP 6 Connect Front Panel Switches/LEDs/Speaker ............................15
STEP 7 Connect IDE & Floppy Disk Drives ................................................17
STEP 8 Connect Other Internal Peripherals ...............................................17
STEP 9 Connect the Power Supply..............................................................18
STEP 10 Install Add-on Cards in Expansion Slots.....................................18
TABLE OF CONTENTS

- 2 -
STEP 11 Connect External Peripherals to Back Panel.............................19
STEP 12 First Time System Boot Up ...........................................................20
STEP 13 Install Drivers & Software Components ......................................21
3.2 JUMPER SETTINGS............................................................................................22
Jumpers & Connectors Guide........................................................................23
Set Keyboard & PS/2 Mouse Power-On (JP3) ...........................................25
Clear CMOS (JP12).........................................................................................26
CPU Clock Ratio Setting (JP9) ......................................................................27
Front Side Bus(FSB) Speed Auto Config. Setting (JP15 and JP14)......28
PS/2 Keyboard & PS/2 Mouse Connectors .................................................29
USB1 / USB2 Port Connectors......................................................................29
COM1 / COM2 Connector ..............................................................................29
Parallel Port Connector...................................................................................29
Hardware Reset Connector (RST) ................................................................30
HDD LED Connector (HDLED)......................................................................30
Green LED Connector (GLED)......................................................................30
EPMI Connector (EPMI) .................................................................................30
ATX Power On/Off Switch Connector (PON) ..............................................31
PWR LED Connector (PWLED) ....................................................................31
Speaker Connector (SPK)..............................................................................31
Enhanced IDE Ports and Floppy Connectors .............................................32
IR Connector (J4).............................................................................................33
Wake-on LAN Connector (J16)......................................................................33
SB-Link Connector (JP10)..............................................................................34
CPU , Cooling Fan Connectors (JP12), (JP2) & (JP1) ..............................34
ATX Power Supply Connector (J5) ...............................................................35

- 3 -
3.3 SYSTEM MEMORY CONFIGURATION........................................................... 36
Install Memory.................................................................................................. 36
Upgrade Memory............................................................................................. 36
4SOFTWAREUTILITY............................................................................36
4.1 AV14 MAINBOARD CD OVERVIEW............................................................... 37
4.2 INSTALL MAINBOARD DRIVER..................................................................... 38
4.3 TO VIEW THE USER'S MANUAL.................................................................... 39
5BIOSSETUP .........................................................................................40
5.1 ENTERING BIOS.................................................................................................. 40
5.2 THE MAIN MENU................................................................................................. 41
Standard CMOS Setup ................................................................................... 43
BIOS Features Setup ...................................................................................... 45
Chipset Features Setup .................................................................................. 49
Integrated Peripherals..................................................................................... 53
Power Management Setup............................................................................. 57
PnP / PCI Configuration.................................................................................. 59
PC Health Status ............................................................................................. 61
Frequency/Voltage Control ............................................................................ 63
Load Fail-Safe Defaults .................................................................................. 64
Load Optimized Defaults ................................................................................ 64
User Password Setting ................................................................................... 65
Save & Exit Setup ............................................................................................ 66
Exit Without Saving ......................................................................................... 66

- 4 -
Quick Reference
Hardware Installation >> Step-by-Step...................................................... Page 10
Jumper Settings >> A Closer Look ............................................................ Page 22
Software Utility >> How to Install ................................................................ Page 37
BIOS Setup >> How to Configure ............................................................... Page 40
About This Manual
For First-Time DIY System Builder ................................................................Page 5
For Experienced DIY User ...............................................................................Page 5
For System Integrator.......................................................................................Page 5
WHAT’S IN THE MANUAL

- 5 -
1 INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as
difficult as you may think. To make your first computer DIY experience a
success, right from the start, we have designed the 3 Hardware Installation
section in a step-by-step fashion for all the first-time DIY system builders. Prior
to installation, we also suggest you to read the whole manual carefully to gain
a complete understanding of your new AV14 mainboard.
Experienced DIY User
Congratulations on your purchase of the Shuttle AV14 mainboard. You will
findthatinstalling yournewShuttle AV14mainboardisjustthateasy. Bundled
withanarrayofonboardfunctions,thehighly-integratedAV14mainboardpro-
vides you with a total solution to build the most stable and reliable system.
Refer to section3.2 Jumper Settings andChapter 4 Software Utility tofindout
how to get the best out of your new mainboard. Chapter 5 BIOS Setup also
containsrelevant informationon howto tuneup yoursystem toachieve higher
performance.
System Integrator
You have wisely chosen Shuttle AV14 to construct your system. Shuttle
AV14 incorporates all the state-of-the-art technology of the VT82C694X
chipset from VIA. It integrates the most advanced functions you can find to
date in a compact ATX board. Refer to section3.2 Jumper Settings and
Chapter 4 Software Utility for an in-depth view of system construction.

- 6 -
1.2 Item Checklist
Check all items you received with your AV14 mainboard to make sure
nothing is missing. The complete package should include:
-One Shuttle AV14 Mainboard
-One ATA/66 Ribbon Cable
-One Floppy Ribbon Cable
-This AV14 User’s Manual
-One CD-ROM containing:
ØThe AV14 user’s manual on PDF format
ØThe VIA 4 IN 1 Drivers
ØThe Award Flashing Utility
JP14
1
PGA370
AWARD
AllrightsreservedPCI/PNP586
S/N 1997
+
J4 1
JP121
JP10
1SB- LINK
J9
1
VT82C694X
9949CE TAIWAN
12CON9600C
VT82C596B 9952CETAIWAN 14DON3022
C
J16
1
AV 14

- 7 -
The AV14 mainboard is carefully designed for the demanding PC user who wants high
performance and maximum intelligent features in a compact package.
2.1 Specifications
-- CPU Support
Support Intel PPGA Celeron Processor 300 ~ 500+ MHz
Intel FC-PGA Coopermine Processor 500 ~ 933+ MHz
-- Chipset
Features VIA VT82C694X AGPset and VT82C596B Chipset.
-- Jumperless CPU Configuration
According to the FC-PGA/PPGA CPU user may adjust CPU voltage.
Soft-configure CPU Speed (The CPU operating speed is software
configurable in menu of the BIOS Setup utility.)
-- Versatile Memory Support
Equipped with three DIMM banks of PC66/100/133 compliant SDRAM to
provide up to 1.5GB of system memory.
Configurable support for EC (Error Checking) and ECC (Error Checking
and Correcting)
-- AGP Slot
Supports 2X/4X Accelerated Graphics Port cards for high-performance,
component level interconnect directed at 3D graphical display applica-
tions.
-- PCI and ISA Expansion Slots
Provides five 32-bit PCI slots which meet PCI spec. and two optional 16-bit
ISA slots.
-- Super I/O Onboard
Provides a variety of I/O interfaces:
Ø1 × Floppy interface for 3.5-inch FDD with 720KB, 1.44MB, 2.88MB
2 FEATURES

- 8 -
format or for 5.25-inch FDD with 360KB or 1.2MB format.
Ø1 × PS/2 mouse connector
Ø1 × PS/2 Keyboard connector
Ø2 × USB connectors
Ø2 × DB9 Serial connectors 16550 UART compatible
Ø1 × Infrared communications port ASKIR and HPSIR compatible.
(Serial port COM2 can also be redirected to an external IrDA Adapter
for wireless connection.)
Ø1 × DB25 Parallel port supporting Standard Parallel Port (SPP),
Enhanced Parallel Port (EPP), and Extended Capabilities Port (ECP)
data transmission schemes.
-- PCI Bus Master IDE Controller Onboard
Two UltraDMA 33/66 Bus Master Dual-channel IDE ports provide support to a
maximum of four IDE devices (one Master and one Slave per channel). The
IDE Bus implements data transfer speeds of up to 33/66 MB/sec and also sup-
ports Enhanced PIO Modes 0 ~ 4.
-- ATX Power Supply Connector
ATX power supply unit can connect to the onboard 20-pin ATX power
connector, supporting Suspend and Soft-On/Off by dual-function power
button.
-- Advanced Configuration and Power Interface
Features four power savings modes: Snoop, Suspend to RAM, Suspend to
Disk, and Soft-Off. ACPI provides more efficient Energy Savings Features
controlled by your operating system that supports OS Direct Power Manage-
ment (OSPM) functionality.
-- System BIOS
Provides licensed Award V6.0PG BIOS on 2MB Flash EEPROM.
Supports Green PC and Desktop Management Interface (DMI).
-- ATX Form Factor

- 9 -
System board conforms to the ATX specification.
Board dimensions: 304mm × 190mm
-- Advanced Features
ØDual Function Power Button - The system can be in one of two states,
one is Suspend mode and the other is Soft-Off mode. Pushing the power
button for less than 4 seconds places the system into Suspend mode.
When the power button is pressed for longer than 4 seconds, the system
enters the Soft-Off mode.
ØKeyboard/Mouse Power-On - This mainboard implements a special
jumper to enable a system power-on function by keyboard or PS/2 mouse.
ØWake-on-LAN (WOL) - The onboard WOL connector can be attached to
a network card that supports this function to wake up the system via the
LAN.
ØModem Ring Power-On - The system can be powered on automatically
by activation of the modem ring.
-- Optional Features
ØVoltage Monitoring - Monitors various voltages of key elements, such as
the CPU, and other critical system voltage levels to ensure stable current
reach to mainboard components. System voltages include Vcore on CPU,
and +5V, +12V, -5V, -12V etc. on system.
ØFan Status Monitoring - To prevent overheating of CPU, the CPU fan is
monitored for RPM and failure. (CPU Cooling FAN with RPM sensor is
required.)
ØTemperature Monitoring- This item allows users to make sure whether the
CPU or system keeps in a suitable temperature.

- 10 -
This section outlines how to install and configure your AV14 mainboard. Refer to the
following mainboard layout to help you identify various jumpers, connectors, slots, and
ports. Then follow these steps designed to guide you through a quick and correct installa-
tion of your system.
3.1 Step-by-Step Installation
Accessories Of AV14
3 HARDWARE INSTALLATION
All rights reserved PCI/PNP 586
S/N 1997
DIMM1 DIMM2 DIMM3
J121
J23
1
J22 1
JP16
1
PS2 Keyboard/Mouse
Connectors
USB Connectors
Socket370
K/B & M/S Power
on Setting - JP3
On Board I/O Chip
Parallel Connector
Serial Port
Connector(COM2)
VIA VT82C694X
Chipset
CPU FAN - JP1 System FAN - JP2
Wake on Lan Connector- J16
VIA VT82C596B Chipset
CPU clock ratio setting - JP9
Five PCI Slots
Two IDE Connectors Three DIMM Sockets CPU Type Setting - JP16
System Clock - JP14
UAGP Slot
AGP Fan - J12
TwoISASlots
FrontPanelConnector
Programming Flash
EEPROM
SBLink- JP10
ATXPower Connector
FloppyConnector
JP3 1
J41
JP12
1
JP10
1
SB- LINK
J9
1
JP141
VT82C694X
9949CE TAIWAN
12CON9600
VT82C596B
9952CE TAIWAN
14DON3022
J16
1
Serial Port
Connector(COM1)
Clear CMOS - J12
IR Connector - J4
AV14

- 11 -
Step 1
Install the CPU:
1. Locate the CPU ZIF (Zero Insertion Force) socket on the upper-right
sector of your mainboard (between the back-panel connectors and the
DIMM memory banks).
2. Pull the CPU ZIF socket lever slightly sideways away from the socket
to unlock the lever, then bring it to an upward vertical position.
3. Place your FC-PGA or PPGA370 processor in the ZIF socket. Note thatthe
CPU’s edges have been purposely designed non-symmetrical to prevent
from inserting the processor in the wrong direction. The following dia
gram demonstrates the correct placement of the CPU in the ZIF socket.
You can see that the two blunt-edged corners should face towards the
socket-lever.
4. Slightly push the CPU into the socket without applying excessive force
while making sure there is no gap between CPU and socket. Then
lower the socket-lever all the way down to its horizontal position and
lock it to secure the CPU in place.
5. The FC-PGA or PPGA 370 CPU requires a set of heatsink/fan to ensure
proper cooling of the processor. If they are not already mounted on your
CPU, you must purchase the heatsink/fan separately and have it installed.
Plug the cable from the heatsink/fan to the CPU fan power connector
located nearby. Note that there are several types of CPU fan connectors.
Normally, if your mainboard supports the hardware monitoring function, a
3-pin fan power connector should allow your system to detect the CPU
fan’s speed . The CPU fan can also run with a 2-pin fan power connector,
however, detection of CPU fan’s speed is not supported. Another type of
CPU fan may feature a large 4-pin fan power connector, which does not
support CPU fan's speed detection and must connect directly to the
system’s power supply unit.
Celeron PPGA CPU Coppermine FC-PGA CPU
Blank Blank Notch Notch Lever

- 12 -
Step 2.
Set Jumpers
This mainboard is jumperless! The default jumper settings have been set for
the common usage standard of this mainboard. Therefore, you do not need
to reset the jumpers unless you require special adjustments as in any cases
below :
1. Over-clock your CPU
2. Clear CMOS
3. Set the wake up function by PS/2 keyboard and PS/2 mouse
For first-time DIY system builders, we recommend that you do not change the
default jumper settings if you are not totally familiar with mainboard configu-
ration procedures. The factory-set default settings are tuned for optimum
system performance. For the advanced users who wish to customize their
system, section 3.2 Jumper Settings will provide detailed information on how
to configure your mainboard manually.
Step 3
Install SDRAM System Memory
To install memory, insert SDRAM memory module(s) in any one, two or three
DIMM banks. Note that SDRAM modules are directional and will not go in
the DIMM slots unless they are properly oriented. After the module is fully
inserted into the DIMM socket, lift the clips of both sides of the DIMM bank to
lock the module in place.

- 13 -
Step 4
Install Internal Peripherals in System Case
Before you install and connect the mainboard into your system case, we
recommend that you first assemble all the internal peripheral devices into the
computer housing, including but not limited to the hard disk drive (IDE/
HDD), floppy disk drive (FDD), CD-ROM drive, and ATX power supply unit.
This will greatly facilitate in making the connections to the mainboard de-
scribed below.
To install IDE & FDD drives, follow this procedure:
1. Set the required jumpers on each device according to the instructions
provided by the manufacturer. (IDE devices, HDD and CD-ROM, have to
set jumpers to Master or Slave mode depending on whether you install
more than one device of each kind.)
2. Connect IDE cable and FDD cable on the back-panel of the internal
peripheral devices. Note that the cable should be oriented with its
colored stripe (usually red or magenta) connected to pin#1 both on the
mainboard IDE or FDD connector and on the device as well.
3. Connect an available power cable from your system power supply unit
to the back-panel of each peripheral device. Note that the power cable is
directional and cannot fit in if not properly positioned.

- 14 -
Step 5
Mount the Mainboard on the Computer Chassis
1. You may find that there are a lot of different mounting hole positions
both on your computer chassis and on the mainboard. To choose a
correct mounting hole, the key point is to keep the back-panel of the
mainboard in a close fit with your system case, as shown below.
2. After deciding on the proper mounting holes, position the studs between
the frame of the chassis and the mainboard. The studs are used to fix the
mainboard and to keep a certain distance between the system chassis
and the mainboard, in order to avoid any electrical shorts between the
board and the metal frame of the chassis. (If your computer case is
already equipped with mounting studs, you will need to tighten screws to
attach the mainboard.)
Note: In most computer housings, you will be able to find 4 or more
attachment points to install mounting studs and fix the mainboard.
If there aren’t enough matching holes, then make sure to install at
least 3 mounting studs to ensure proper attachment of the
mainboard.

- 15 -
Step 6
Connect Front Panel Switches/LEDs/Speaker
You can find there are several different cables already existing in the system
case and originating from the computer’s front-panel devices (HDD LED,
Power LED, Reset Switch, PC Speaker, etc.)
These cables serve to connect the front-panel switches and LEDs to the
mainboard’s front-panel connectors group, as shown below.
1. ATX Soft Power On/Off (PON)
2. Green-LED (GLED)
3. EPMI
(Hardware System Management
Interface)
PWLED
RST HD LED GLED EPMI PON
SPK JP 13
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON

- 16 -
4. HDD-LED (HDLED)
5. Power-LED (PW LED)
6. Hardware Reset Switch (RST)
7. PC Speaker (SPK)
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON
SPK JP13
PW LED
+
+ +
RST HDLED GLED EPMI PON

- 17 -
Step 7
Connect IDE & Floppy Disk Drives
1. IDE cable connector
2. FDD cable connector
Step 8
Connect Other Internal Peripherals
1. IR connector

- 18 -
Step 9
Connect the Power Supply
1. System power connector
Step 10
Install Add-on Cards in Expansion Slots
1. Accelerated Graphics Port (AGP) Card
2. PCI Card
3. ISA Card