Shuttle ME62 User manual

ME62/ME63/ME64
Intel810FamilyBased
Twin Processors MainBoard
User's Manual

Shuttle®SpacewalkerTM ME62/ME63/ME64
Twin processor based AGPset Mainboard
Manual Version 1.0
Copyright
Copyright©1999 by Shuttle®Inc. All RightsReserved.
Nopartofthis publicationmay bereproduced, transcribed,stored ina retrievalsystem,
translated into any language, or transmitted in any form or by any means, electronic,
mechanical,magnetic,optical,chemical, photocopying, manual,orotherwise,without
priorwritten permissionfrom Shuttle®Inc.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from
theperformance or use of thisproduct.
Thiscompanymakes norepresentationsor warranties regardingthecontents ofthismanual.
Informationinthis manualhasbeen carefully checkedforreliability; however,noguarantee
is given as to the correctness of the contents. In the interest of continued product improve-
ment, this company reserves the right to revise the manual or include changes in the specifi-
cations of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes. The information contained in this manual is
providedforgeneral use bythecustomers.
Trademarks
Spacewalkeris aregisteredtrademark ofShuttle Inc.
Intel,Pentium isa registeredtrademarks ofIntel Corporation.
PC/ATXisaregistered trademarkofInternationalBusinessMachines (IBM)Corporation.
PS/2is aregistered trademarkof IBMCorporation.
AWARDis aregistered trademark ofAward SoftwareInc.
Microsoftand Windows areregistered trademarks ofMicrosoft Corporation.
General Notice:Otherbrandandproduct namesusedherein areforidentification
purposesonly andmaybe trademarksoftheir respectiveowners.
M295

- 1 -
WHAT’SIN THEMANUAL ................................................................5
QuickReference.................................................................................................5
About This Manual..............................................................................................5
Technical Support..............................................................................................5
1INTRODUCTION ............................................................................6
1.1 TO DIFFERENT USERS................................................................................6
First-Time DIY System Builder..................................................................6
Experienced DIY User ..............................................................................6
System Integrator......................................................................................6
1.2 ITEM CHECKLIST.........................................................................................7
2FEATURES....................................................................................8
2.1 SPECIFICATIONS.........................................................................................8
3HARDWARE INSTALLATION.......................................................11
3.1 STEP BY STEP INSTALLATION................................................................11
STEP 1 Install the CPU...........................................................................12
STEP 2 Set Jumpers ..............................................................................15
STEP 3 Install SDRAM System Memory................................................15
STEP 4 Install Internal Peripherals in System Case ..............................16
STEP 5 Mount the Mainboard on the Computer Chassis ......................17
STEP 6 Connect Front Panel Switches/LEDs/Speaker .........................18
STEP 7 Connect IDE & Floppy Disk Drives ...........................................20
STEP 8 Connect Other Internal Peripherals...........................................20
STEP 9 Connect the Power Supply........................................................21
STEP 10 Install Add-on Cards in Expansion Slots.................................22
TABLEOFCONTENTS

- 2 -
STEP 11 Connect External Peripherals to Back Panel..........................23
STEP 12 First Time System Boot Up .....................................................25
STEP 13 Install Drivers & Software Components ..................................26
3.2 JUMPER SETTINGS....................................................................................27
JUMPERS & CONNECTORS GUIDE ....................................................28
Set PS/2 or USB Keyboard/Mouse Power-On Function (J1).................30
ICH Voltage Setting (J25).......................................................................31
AMR Slot Setting (J9) .............................................................................31
Configuring CPU Host Clock (J10A, J26)...............................................32
Clear CMOS (J12)...................................................................................33
Boot-Block Protection (J16)....................................................................33
Suspend to RAM (J23)............................................................................33
Factory Reserved (J27) ..........................................................................34
PS/2 Keyboard & PS/2 Mouse Connectors............................................34
USB0/USB1 Port Connectors.................................................................34
COM1 Connector....................................................................................34
VGA Connector.......................................................................................35
Parallel Port Connector...........................................................................35
Line-Out ..................................................................................................35
Line-In .....................................................................................................35
Mic-In.......................................................................................................35
MIDI/GAME Port .....................................................................................36
ATX Power On/Off Switch Connector (PWON)......................................36
Green LED Connector (GLED)...............................................................36
EPMI Connector (EPMI) .........................................................................37
HDD LED Connector (IDE LED).............................................................37

- 3 -
Hardware Reset Connector (RST)..........................................................37
Speaker Connector (SPK) ......................................................................37
PWR LED Connector (PWRLED)...........................................................37
Front Panel USB Connector Header ......................................................38
Line-Out and Mic-In Header ...................................................................38
Enhanced IDE Ports and Floppy Connectors.........................................38
ATX Power Supply Connector (JWR1)...................................................39
Cooling Fan Connectors for CPU1 (FAN1),
CPU2 (FAN2) & Chassis (FAN3)............................................................39
COM2 Connector....................................................................................40
SIR/CIR Connector (J13)........................................................................40
Wake-on LAN Connector (J19)...............................................................40
Audio Connector AUX_In (JP2)..............................................................41
Audio Connector TAD_In (JP4) ..............................................................41
Audio Connector CD_In (JP6) ................................................................41
3.3 SYSTEM MEMORY CONFIGURATION......................................................42
Install Memory.........................................................................................42
Upgrade Memory ....................................................................................42
4SOFTWAREUTILITY ...................................................................43
4.1 Mainboard CD Overview...........................................................................43
4.2 Install INF Driver........................................................................................44
4.3 Install Display Adaptor Driver Software.................................................45
4.4 Install Audio Device Software..................................................................46
4.5 To View the User's Manual.......................................................................47

- 4 -
5 BIOS SETUP ...............................................................................48
5.1 ENTERING BIOS.........................................................................................48
5.2 THE MAIN MENU.........................................................................................49
STANDARD CMOS FEATURES ................................................................51
ADVANCED BIOS FEATURES ..................................................................55
ADVANCED CHIPSET FEATURES ...........................................................58
INTEGRATEDPERIPHERALS...................................................................61
POWER MANAGEMENT SETUP...............................................................65
PNP/PCI CONFIGURATION.......................................................................69
PC HEALTH STATUS.................................................................................71
FREQUENCY/VOLTAGE CONTROL.........................................................73
LOAD FAIL-SAFE DEFAULTS ...................................................................74
LOAD OPTIMIZED DEFAULTS..................................................................74
SET SUPERVISOR PASSWORD ..............................................................75
SET USER PASSWORD ............................................................................75
SAVE & EXIT SETUP .................................................................................77
EXIT WITHOUT SAVING............................................................................77

- 5 -
Quick Reference
HardwareInstallation >>Step-by-Step.................................................Page 11
Jumper Settings >> A Closer Look.......................................................Page 27
Software Utility >> How to Install..........................................................Page 43
BIOS Setup >> How to Configure.........................................................Page 48
About This Manual
For First-Time DIY System Builder.........................................................Page 6
ForExperienced DIY User.......................................................................Page 6
For System Integrator..............................................................................Page 6
TechnicalSupport
Contact Your Dealer
Check Shuttle’s Web Site
Shuttle’s (RMA or Warranty?) Policy
WHAT’SINTHEMANUAL

- 6 -
1INTRODUCTION
1.1To DifferentUsers
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as
difficult as you may think. To make your first computer DIY experience a
success, right from the start, we have designed the Chapter 3 Hardware In-
stallation section in a step-by-step fashion for all the first-time DIY system
builders.
Prior to installation, we also suggest you to read the whole manual carefully to
gain a complete understanding of your new Shuttle ME62/ME63/ME64
mainboard.
Experienced DIY User
Congratulationsonyourpurchase of the ShuttleME62/ME63/ME64mainboard.
You will find that installing your new Shuttle ME62/ME63/ME64 mainboard is
just that easy. Bundled with an array of onboard functions, the highly-inte-
grated ME62/ME63/ME64 mainboard provides you with a total solution to
build the most stable and reliable system. Refer to section 3.2 Jumper Set-
tings and Chapter 4 Software Utility to find out how to get the best out of
your new mainboard. Chapter 5 BIOS Setup also contains relevant informa-
tion on how to tune up your system to achieve higher performance.
System Integrator
You have wisely chosen Shuttle ME62/ME63/ME64 to construct your system.
Shuttle ME62/ME63/ME64 incorporates all the state-of-the-art technology of
the i810(E) chipset from Intel. It integrates the most advanced functions you
can find to date in a compact Micro/Flex ATX board. Refer to section 3.2
Jumper Settings and Chapter 4 Software Utility for an in-depth view of sys-
tem construction.

- 7 -
1.2Item Checklist
Check all items you received with your ME62/ME63/ME64 mainboard to
make sure nothing is missing. The complete package should include:
One Shuttle ME62/ME63/ME64 Mainboard
(with onboard Slot 1 and Socket 370, built-in
Intel i810(E) chipset , MicroATX form factor,
including 2xUSB, 2xSerial, and 1xParallel ports,
plus 1xPS/2 Keyboard, and 1xPS/2 Mouse
connectors.)
One ATA/66 Ribbon Cable
One Floppy Ribbon Cable
One 9-pin COM2 Cable
One set of Universal Retention Mechanism
One ME/62/ME63/ME64 User’s Manual
One Shuttle Spacewalker Bundled CD-ROM containing:
The ME62/ME63/ME64 user’s manual on PDF format
The Intel INF driver
The Intel 810(E) VGA driver
The audio CODEC driver
The Awdflash Utility

- 8 -
The ME62/ME63/ME64 mainboard is carefully designed for the demanding PC user who
wants high performance and maximum intelligent features in a compact package.
2.1Specifications
CPU Support
<Slot 1>
Pentium III processors : 500 ~ 666+ MHz
Pentium II processors : 233/66 ~ 333/66 and 350/100 ~ 500/100 MHz
Celeron SEPP processors : 266 ~ 433+ MHz
<Socket 370>
PGA 370 Celeron processors: 266/66 ~ 500+/66 MHz
PGA 370 Celeron processors: 500+/100 MHz (for future CPU upgrade)
Chipset
ME62/ME63 : Features 66/100 MHz Intel 810 / 810DC100 system chipset
with integrated 2D/3D AGP graphics engine, onboard AC97 Codec digital
link sound controller, and I/O subsystems which support UltraDMA 33/66
devices allowing up to 66 MB/sec of disk data transfer speed.
ME64 : Features 66/100/133 MHz Intel 810E system chipset with integrated
2D/3D AGP graphics engine, onboard AC97 Codec digital link sound
controller, and I/O subsystems which support UltraDMA 33/66 devices
allowing up to 66 MB/sec of disk data transfer speed.
Versatile Memory Support
ME62/ME63 : Equipped with two DIMM banks of 66MHz/100MHz compli-
ant SDRAM to provide up to 512MB of system memory.
ME64 : Equipped with two DIMM banks of 66MHz/100MHz/133MHz
compliant SDRAM to provide up to 512MB of system memory.
Built-In 2D/3D Graphics Controller
The onboard Intel 810(E) chipset integrates a high-performance 2D/3D
graphics controller which provides a full 2D H/W acceleration, and 3D
Hyper Pipelined Architecture.
2FEATURES