Shuttle AV49V User manual

AV49V & AV49VN
Intel Pentium 4/Celeron
478-pinProcessor
with 400/533 MHz FSB
Based DDR MAINBOARD
User's Manual

M812
Shuttle®AV49V & AV49VN
Intel Pentium 4/Celeron
478-pin Processor
with 400/533 MHz FSB
Based DDR Mainboard
Manual Version 1.0
Copyright
Copyright©2003 by Shuttle®Inc. All Rights Reserved.
This publication, including all photos, illustrations, and software, is protected under interna-
tional copyright laws, with all rights reserved. Reproducing any of the material contained
herein is prohibited without the consent of the publisher.
Disclaimer
Shuttle®Inc. shall not be liable for any incidental or consequential damages resulting from the
performance or use of this product.
This company makes no representations or warranties regarding the contents of this manual.
Information in this manual has been carefully checked for reliability; however, no guarantee is
given as to the correctness of the contents. In the interest of continued product improvement,
this company reserves the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify any
person of such revision or changes. The information contained in this manual is provided for
general use by the customers.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
VIAisaregisteredtrademarkofVIACorporation.
Intel, Pentium, and Celeron are registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used in this manual are ascribed to their respective
owners and acknowledged.

Statement of Shuttle Mainboard via the EMI Test
Shuttle mainboards have been via the EMI test in terms of series of regulations: EN55022/
CISPR22/AS/NZS3548ClassB,EN55024(1998/AS/NZS),EN4252.1(1994),EN61000,ANSI
C63.4 (1992), CFR47 Part 15 Subpart B, and CNS13438 (1997). The items tested are illus-
trated as follows:
(A)Voltage:AC110V/60HZ &AC230V/50HZ
(B) Tested Product Information:
Product Name: PC Mainboard
Status: Sample
ModelName:AV49V/AV49VN
S/N:N/A
CPU:
External Frequency: 100 MHz
IntelPentium IV 1.6/1.8/2.0/2.2/2.4/2.5/2.6GHz
External Frequency: 133 MHz
IntelPentium IV 2.26/2.40/2.53/2.66/2.80/3.06GHz
Mouse Port: one port with 6 pins
Keyboard Port: one port with 6 pins
Parallel Port: one port with 25 pins
Serial Port: one port with 9 pins
Center/Bass-Out & Line-Out & Line-In Ports: one port for each
Mic-In Ports: two ports
LANPort: one port with 8 pins (10Mbps/100Mbps)(AV49VN only)
USB Port: two ports with 4 pins respectively
DDR Memory: 256 MB*3
Power Cable: Detachable and Shielded (with a GND pin)
Maximum Resolution: 1280 X 1024 V:60Hz
All CPUs have completely been tested, and values offered by the worst EMI combination of
CPU external frequency are listed as follows:
(C) Remedy for the Tested Product & Its EMI Interference:
Remedy:N/A
EMIInterference:
Crystal:14.318MHz(X1)/24.576 MHz(X4)/25.00 KHz(X5)/32.768 MHz(X2)
Clock Generator: U12
Test Mode External Frequency CPU Open/Close
1133MHz P4 3.06 GHz+ Close
2133MHz P4 3.06 GHz Open
3100MHz P4 2.4 GHz Close
4100MHz P4 2.4 GHz Open

(D)Differencebetween AV49VNandAV49V:
To discriminateAV49VN fromAV49V lies in the extent that chips inAV49VN support LAN, and
the combination for testing is based onAV49VN.
(E) Supported Host Peripherals:
(F) Notices for Assembling Computers:
1. Cases should be made of iron or other metal that has good electric conductivity.
2. Cylinders in a case should be made of metal, and as having a mainboard mounted
in a case, make sure screws are all utilized and fastened on a mainboard.
3. An I/O shielding should be contacted with I/O metallic parts of a mainboard.
4. Cables should appropriately be arranged and fixed in a case. Follow instructions:
Ø Leave IDE cables not crossed upon CPU and SDRAM;
Ø Leave power cables minimum in length, and not crossed upon a mainboard;
Ø Leave CPU fan cables minimum in length, and not near CPU;
Ø Leave cables on panels and other spare cables tied in a computer case.
5. Make sure an EMI shielding attached to a case has properly been installed.
6. Make sure a 5.25" or 3.5" FDD and screws are fastened to an EMI shielding.
7. Make sure a case is closely in contact with EMI connected points.
8. Make sure there is no cleft in a case which is not deformed.
9. Make sure a PCI orAGP door is bound to a case.
10. Make sure cables of other devices (fans or some others) are fixed in a case.
Host Peripheral Product Name Model Name S/N FCC ID
#1 Case AV49V N/A
#2 Power Supply (300W) ENP-0735 (ATX12V) 100322501
#3 Maxtor HDD (40GB) D740X-6L N/A 3902B975
#4 Panasonic FDD JU-257A606P
#5 DVD Player DVD-116 AAMS027197WL 3892D029
#6 AGP Card Winfast Geforce 2 MX 3892C520
#7 Power Cable Detachable and Shielded

- 1 -
WHAT'S IN THE MANUAL.................................................................... 5
Quick Reference............................................................................................... 5
About This Manual ........................................................................................... 5
1 INTRODUCTION................................................................................ 6
1.1 TO DIFFERENT USERS ............................................................................. 6
FIRST-TIMEDIYSYSTEMBUILDER............................................................ 6
EXPERIENCEDDIYUSER ......................................................................... 6
SYSTEMINTEGRATOR............................................................................... 6
1.2 ITEM CHECKLIST....................................................................................... 7
2 FEATURES ........................................................................................ 8
2.1 SPECIFICATIONS ....................................................................................... 8
3 HARDWARE INSTALLATION.......................................................... 11
3.1 STEP BY STEP INSTALLATION................................................................11
STEP1 CPUInstallation ........................................................................ 12
STEP 2 Set Jumpers............................................................................. 13
STEP3 Install DDR SDRAM System Memory........................................ 13
STEP 4Install InternalPeripherals inSystemCase ................................ 14
STEP5 Mount theMainboard on theComputer Chassis........................ 15
STEP6 Connect FrontPanel LEDs/Switches/USBs .............................. 16
STEP 7 Connect IDE and Floppy Disk Drives........................................ 17
STEP8Connect OtherInternalPeripherals............................................ 17
STEP9 Connect thePower Supplies .................................................... 18
STEP10 InstallAdd-on Cards inExpansion Slots .................................. 18
STEP11 Connect External Peripheralsto Back Panel ........................... 19
STEP12 InstallDrivers &Software Components ................................... 20
TABLE OF CONTENTS

- 2 -
3.2 JUMPER SETTINGS ................................................................................. 21
JUMPERS& CONNECTORSGUIDE.................................................... 22
Jumpers
Clear CMOS Setting (JP1) ................................................................... 24
CPUFrequency Setting (JP2)............................................................... 25
BIOSFlash ProtectionSetting (JP3) ...................................................... 25
Back Panel Connectors
PS/2Mouse & PS/2 Keyboard PortConnectors .................................... 26
ParallelPortConnector.......................................................................... 26
COM1Port Connector ........................................................................... 26
MIDI/GamePortConnector.................................................................... 26
Line-OutPortConnector ........................................................................ 27
Line-InPortConnector ........................................................................... 27
Mic-InPortConnector ............................................................................ 27
LANPort Connector(AV49VNOnly) ...................................................... 27
USBPortConnectors ............................................................................ 27
Front Panel Connectors
HDD LED Connector (HDDLED)........................................................... 28
HardwareResetConnector (RST) ......................................................... 28
GreenLED Connector (MSGLED)......................................................... 29
ATXPowerOn/Off SwitchConnector(PWRBTN) ................................... 29
FrontPanelMicrophone andLine-OutHeader (AUDIO1) ....................... 30
ExtendedUSB Headers(USB2/USB3).................................................. 31
Internal Peripheral Connectors
Enhanced IDEand FloppyConnectors (IDE1/IDE2& FDD1) ................. 32
Other Connectors
ATXPower SupplyConnectors (ATX1/ATX2) ........................................ 33

- 3 -
CPU and Chassis Fan Connectors (CPUFAN1/CASFAN1)................... 34
AudioCD_IN Connector (CD1).............................................................. 34
InternalSpeaker Header (SPEAKER1).................................................. 34
3.3 SYSTEM MEMORY CONFIGURATION ..................................................... 35
1.INSTALLMEMORY ............................................................................ 35
2.UPGRADEMEMORY ........................................................................ 35
4 SOFTWARE UTILITY ......................................................................36
4.1 Mainboard CD Overview ......................................................................... 36
4.2 Install Mainboard Software ..................................................................... 37
4.2.A Install VIA 4in1 Driver .................................................................... 38
4.2.B Install VIAAudio Driver................................................................. 39
4.2.C Install VIA USB2.0 Driver.............................................................. 40
4.2.D Install VIA LAN Driver (AV49VN Only).......................................... 41
4.3 View the User's Manual........................................................................... 42
5 BIOS SETUP ................................................................................... 43
5.1 ENTER BIOS ............................................................................................. 43
5.2 THE MAIN MENU ...................................................................................... 44
STANDARD CMOS FEATURES ............................................................... 46
ADVANCED BIOS FEATURES................................................................. 49
ADVANCED CHIPSET FEATURES .......................................................... 52
INTEGRATEDPERIPHERALS .................................................................. 56
POWERMANAGEMENT SETUP.............................................................. 59
PNP/PCICONFIGURATIONS .................................................................... 63
PCHEALTH STATUS................................................................................ 65
FREQUENCY/VOLTAGECONTROL......................................................... 66
LOAD FAIL-SAFE DEFAULTS .................................................................. 67

- 4 -
LOADOPTIMIZEDDEFAULTS ................................................................. 67
SETSUPERVISOR/USER PASSWORD................................................... 68
SAVE & EXIT SETUP................................................................................ 69
EXITWITHOUTSAVING ............................................................................ 69

- 5 -
Quick Reference
Hardware Installation >> Step-by-Step ................................................ Page 11
Jumper Settings >> A Closer Look.......................................................Page 21
Drivers/Software Utilities >> How to Install .........................................Page 36
BIOS Setup >> How to Configure.........................................................Page 43
About This Manual
For First-Time DIY System Builder.........................................................Page 6
For Experienced DIY User ......................................................................Page 6
For System Integrator .............................................................................Page 6
WHAT'S IN THE MANUAL

- 6 -
1INTRODUCTION
1.1 To Different Users
First-Time DIY System Builder
Welcome to the DIY world! Building your own computer system is not as diffi-
cult as you may think. To make your first computer DIY experience successful,
right from the start, we have designed the 3.1 Hardware Installation section
in a step-by-step fashion for all the first-time DIY system builders. Prior to instal-
lation, we also suggest you to read the whole manual carefully to gain a com-
plete understanding of your new Shuttle AV49V/AV49VN mainboard.
Experienced DIY User
Congratulate on your purchase of the Shuttle AV49V/AV49VN mainboard.
You will find that installing your new Shuttle AV49V/AV49VN mainboard is
just easy. Bundled with an array of onboard functions, the highly-integrated
AV49V/AV49VN mainboard provides you with a total solution to build the
most stable and reliable system. Refer to sections 3.2 Jumper Settings and
Chapter 4 Drivers/Software Utilities to find out how to get the best out of
your new mainboard. Chapter 5 BIOS Setup also contains the relevant infor-
mation on how to tune up your system to achieve higher performance.
System Integrator
You have wisely chosen Shuttle AV49V/AV49VN to construct your system.
Shuttle AV49V/AV49VN incorporates all the state-of-the-art technology of the
APOLLO P4X400 VT8754 chipset from VIA. It integrates the most advanced
functions you can find to date in a compact ATX board.
This manual is all-purpose for two kinds of mainboards: AV49V and
AV49VN. The main difference between them is that AV49VN is
equipped with an onboard LAN. In the manual, if there are some
standards, characteristics, equipment, or software adopted only by
AV49VN, it will be highlighted in brackets.

- 7 -
1.2 Item Checklist:
Check all items with your AV49V/AV49VN mainboard to make sure nothing
is missing. The complete package should include:
-One piece of Shuttle AV49V/AV49VN Mainboard
-One piece of ATA 133/100/66/33 Ribbon Cable
-One piece of Floppy Ribbon Cable
-One piece of twin ports USB Cable (optional)
-AV49V/AV49VN User's Manual
-I/O Shielding
-One piece of Bundled CD-ROM with containing:
ØAV49V/AV49VN user's manual saved in PDF format
ØVIA 4in1 Driver
ØVIA LAN Driver (AV49VN Only)
ØVIA Audio Driver
ØVIA USB2.0 Driver
ØAward Flashing Utility
UP350017
PSKBM1
Winbond
COM1
IDE1
IDE2
1
LPT1
USBLANA1
UA930084
VT8235
0311CD TAIWAN
VT1612A
JS1
USBLANA1
USBLAN1
ATX2
ATX1
AUDIO1
1
JP2
1
DDRDIMM1
DDRDIMM2
DDRDIMM3
CPUFAN1
1
AGP1
JP3
1
BT1
CD1
1
PCI1
PCI2
PCI3
PCI4
PCI5
FDD1 1
USB2
1
USB3
1
1JP1
PANEL1
1
CASFAN1
1
SPEAKER1
1
1

- 8 -
AV49V/AV49VN mainboard is carefully designed for the demanding PC user who wants
high performance and maximum intelligent features in a compact package.
2.1 Specifications
-CPU Support
Intel Pentium 4/Celeron, 478-pin processors with 400/533 MHz FSB.
-Chipset
Features VIA APOLLO P4X400 VT8754 N.B. and VIA VT8235 S.B..
-Hyper-Threading Technology
The latest Intel application defines a high-speed calculating ability to opti-
mize your system by two CPUs supported (one virtual, one physical) in a
multi-task environment.
-CPU FSB Configuration
Soft-configuration FSB (The FSB speed is software configurable from 100MHz
to 133MHz.)
-Onboard 10/100Mb/s LAN (AV49VN Only)
The VIA VT6103 incorporated provides the mainboard with integrated 10/
100 Mbps Fast Ethernet capabilities.
-AC'97 Link for Audio and Telephony CODEC
AC'97 2.2 compliant.
Spread independent PCI functions for Audio and Modem.
-Versatile Memory Support
Three 184-pin DIMM slots to support max 3GB of PC1600/PC2100/
PC2700 compliant with DDR SDRAM module.
-PCI Expansion Slots
Provides five 32-bit PCI slots.
-AGP Expansion Slot
Provides one AGP 3.0 compliant slot which supports 4X/8X AGP devices.
2 FEATURES

- 9 -
-6 USB 2.0 Interface Onboard
2 * USB connectors on back panel and 2 sets of dual USB ports headers on
mid-board.
-I/O Interface
Provides a variety of I/O interfaces:
Ø1* PS/2 mouse connector.
Ø1* PS/2 keyboard connector.
Ø1* DB25 parallel port.
Ø1* serial port.
Ø1* MIDI/Game port.
Ø1* Line-Out port.
Ø1* Line-In port.
Ø1* Mic-In port.
Ø1* LAN port. (AV49VN only)
-PCI Bus Master IDE Controller Onboard
Two Ultra DMA 133/100/66/33 Bus Master Dual-channel IDE ports provide
support to a maximum of four IDE devices (one Master and one Slave per chan-
nel). The IDE Bus implements data transfer speeds of up to 133/100/66/33
MB/sec and also supports Enhanced PIO Modes. 80-pin Cable Backward Com-
patible Legacy ATAPI Devices, ATAPI IDE CD-ROM, CD-R, CD-RW, and LS-
120 Supports.
-ATX Power Supply Connector
ATX power supply unit can be connected to the onboard 20-pin ATX power
connector, and 4-pin ATX power connector. The unit supports Suspend and
Soft-On/Off modes by the dual-function power button.
-Advanced Configuration and Power Interface
Features three power saving modes: S1 (Snoop), S4 (Suspend to DISK), and
S5 (Soft-Off). ACPI provides more efficient Energy Saving Features controlled
by your operating system that supports OS Direct Power Management
(OSPM) functionality.
-System BIOS
Provides licensed Award BIOS V6.0 PG on Intel Firmware Hub 2Mb Flash
core and supports Green PC, Desktop Management Interface (DMI).

- 10 -
-ATX Form Factor
System board conforms to ATX specification.
Board dimension: 305 mm * 244 mm.
-Advanced Features
ØLow EMI - Built in spread spectrum. Unused PCI/SDRAM slots are shut off
by the automatic clock for reducing EMI.
ØDual Function Power Button - The system can be in any of the two
states: one is Suspend mode and the other is Soft-Off mode. Pushing the
power button for less than 4 seconds places the system into Suspend
mode. When the power button is pressed for longer than 4 seconds, the
system will enter Soft-Off mode.
ØCPU Multiplier Setting - This item allows users to adjust CPU Multiplier
in BIOS.
ØCPU Clock Setting - This item allows users to adjust CPU Clock in BIOS.
-Intelligent Features
ØVoltage Monitoring - Monitors various voltages of key elements, such as
the CPU, and other critical system voltage levels to ensure a stable current
passing through mainboard components.
ØFan Status Monitoring -To prevent the CPU from overheating, the CPU
fan is monitored by RPM, with which the cooling fan is required.
ØTemperature Monitoring -This item allows users to make sure whether
the CPU or system runs under a suitable temperature.

- 11 -
Before removing/installing any of these devices: CPU, DIMMs, Add-On
Cards, and Cables, please unplug the onboard power connector.
This section outlines how to install and configure your mainboard. Referring to the follow-
ing mainboard layout helps you identify various jumpers, connectors, slots, and ports.
Steps described herein will lead you to a quick and correct installation of your system.
3.1 Step-by-Step Installation
Accessories Of AV49V/AV49VN
3HARDWAREINSTALLATION
UP350017
PSKBM1
Winbond
COM1
IDE1
IDE2
1
LPT1
USBLANA1
UA930084
VT8235
0311CD TAIWAN
VT1612A
JS1
USBLANA1
USBLAN1
ATX2
ATX1
AUDIO1
1
JP2
1
DDRDIMM1
DDRDIMM2
DDRDIMM3
CPUFAN1
1
AGP1
JP3
1
BT1
CD1 1
PCI1
PCI2
PCI3
PCI4
PCI5
FDD1 1
USB2
1
USB3
1
1
JP1
PANEL1
1
CASFAN1
1
SPEAKER1
1
1
PS/2 Mouse & PS/2
Keyboard Port Connectors
COM1 Port Connector
Parallel Port Connector
Socket 478
Three DIMM Slots
ATX 12V Power
Connector - ATX2
ATX Power
Connector - ATX1
MIDI/Game & Line-Out/
Line-In/Mic-In Port
Connectors
LAN(AV49VN Only) &
USB Port Connectors
Front Panel Audio
Header - AUDIO1
BIOS Flash Protection
Jumper - JP3
CD_IN Connector - CD1
One AGP8X Slot
Five PCI Slots
VIA APOLLO P4X400
VT8754 Chipset
Extended USB
Headers - USB2 & USB3
VIA VT8235 Chipset
Clear CMOS Jumper - JP1
Floppy Connector
Front Panel
Header - PANEL1 Internal Speaker Header - SPEAKER1
C
A
S
F
A
N
1
T
w
o
I
D
E
C
o
n
n
e
c
t
o
r
s
C
P
U
F
r
e
q
u
e
n
c
y
J
u
m
p
e
r
-
J
P
2
C
P
U
F
A
N
1
VIA VT6103(AV49VN Only)

- 12 -
Step 1
CPU Installation:
This mainboard supports Intel Pentium 4/Celeron Socket 478 series CPU.
Please follow the steps as follows to finish CPU installation.
Note the CPU orientation when you plug it into CPU socket.
1. Pull up the CPU socket lever to 90-degree angle.
2. Locate Pin 1 in the socket and look for a black dot or cut edge on the CPU
upper interface. Match Pin 1 and cut edge, and insert the CPU into the
socket.
3. Press down the CPU socket lever and finish CPU installation.
4. Intel Pentium 4/Celeron processors require a set of heatsink and fan to cool
down the processor. You need to purchase a heatsink and fan if they are not
bundled with your CPU. Required is that install the set and plug its cable
in the CPU fan power connector. Note that there are kinds of CPU fan
connectors. Normally, if your mainboard supports a hardware monitoring
function, a 3-pin fan power connector can have your system detect the
CPU fan's speed. A CPU fan with a 2-pin or 4-pin fan power connector
does not support the detection of the CPU fan's speed, and must directly
be connected to the system's power supply unit.
Note: The CPU might be
damaged if you do not match
the CPU socket Pin 1 and cut
edge well.
CPU socket lever up to
90-degree angle
CPU Pin 1 and cut edge

- 13 -
Step 2.
Set Jumpers
The default jumper settings have been set for the common usage standard of
this mainboard. Therefore, you do not need to reset the jumpers unless you
require special adjustments as any of the following cases:
1. Clear CMOS
2. CPU Frequency
3. BIOS Flash Protection
For first-time DIY system builders, we recommend that you do not change the
default jumper settings if you are not totally familiar with the mainboard
configuration procedures. The factory-set default settings are tuned for opti-
mum system performance. For the advanced users who wish to customize
their system, section 3.2 Jumper Settings will provide detailed information
on how to configure your mainboard manually.
Step 3
Install DDR SDRAM System Memory
To install memory, insert DDR SDRAM memory module(s) in any one or two
DIMM banks. Note that SDRAM modules are directional and will not go in
the DIMM banks if they are not properly oriented. After the module is fully
inserted into the DIMM bank, lift the clips of both sides of the DIMM bank to
lock the module in place.
DDR SDRAM

- 14 -
Step 4
Install Internal Peripherals in System Case
Before you install and connect the mainboard into your system case, we
recommend that you first assemble all the internal peripheral devices into the
computer housing, including but not limited to the hard disk drive (IDE/
HDD), floppy disk drive (FDD), CD-ROM drive, and ATX power supply unit.
This will greatly facilitate in making the connections to the mainboard de-
scribed below.
To install IDE & FDD drives, follow this procedure:
1. Set the required jumpers on each device according to the instructions
provided by the manufacturer. (IDE devices, HDD, and CD-ROM, have to
set jumpers to Master or Slave mode depending on whether you install
more than one device of each kind.)
2. Connect IDE cable and FDD cable on the back panel of the internal
peripheral devices to the corresponding headers on board. Note that the
cable should be oriented with its colored stripe (usually red or magenta)
connected to pin#1 both on the mainboard IDE or FDD connector and on
the device as well.
3. Connect an available power cable from your system power supply unit
to the back panel of each peripheral device. Note that the power cable is
directional and cannot fit in if not properly positioned.

- 15 -
Step 5
Mount the Mainboard on the Computer Chassis
1. You may find there are a lot of mounting holes on your computer chassis
and mainboard. To match the holes on both properly, the key point is to
make the back panel of the mainboard in a close fit with your system case,
as shown below.
2. Position the studs between the chassis and the mainboard. The studs are
used to fix the mainboard and to keep a certain distance between the
them, for avoiding any electrical shorts in-between.
(If your computer case is already equipped with mounting studs, you need
to tighten the screws to attach the mainboard.)
Note: In most computer housings, you can find 4 or more holes to place
studs for fixing the mainboard. If there aren't enough matching holes,
screw at least 4 studs to ensure the proper attachment of the main-
board.

- 16 -
Step 6
Connect Front Panel LEDs/Switches/USBs
You can find there are several different cables already existing in the system
case and originating from the computer's front panel devices (HDD LED,
MSG LED, Reset Switch, or USB devices etc.). These cables serve to connect
the front panel LEDs, switches, and USB connectors to the mainboard's front
panel, PANEL1 and USB2/USB3, as shown below.
1. HDD LED (HDDLED)
2. Hardware Reset Switch Button (RST)
3. Green LED (MSGLED)
4. ATX Soft Power On/Off (PWRBTN)
5. Extended USB Headers (USB2/USB3)
PANEL1
1
HDDLED
RST
MSGLED
PWRBTN
+
_
+
_
1
USB2
1
USB3
4
3
2
1
PANEL1
1
HDDLED
RST
PWRBTN
MSGLED
+
_
+
_
USB2/USB3
5
2
1=VREG_FP_USBPWR0
3=USB_FP_P0-
5=USB_FP_P0+
7=GND
9=KEY
2=VREG_FP_USBPWR0
4=USB_FP_P1-
6=USB_FP_P1+
8=GND
10=USB_FP_OC0
6
8
10
1
5
7
9
4 3