Siegenia AERO AEROMAT 150 User manual

ИНСТРУКЦИЯ
Siegenia Aeromat 150

AERO
Sound absorbing ventilator.
AEROMAT 150
Window systems
Door systems
Comfort systems
ASSEMBLY AND
OPERATING INSTRUCTIONS

2
AEROMAT 150 Installation and operating instructions
03.2020
Contents
Target group of this documentation................................................................................................................................................ 3
Correct use ...................................................................................................................................................................................... 3
Safety notices.................................................................................................................................................................................. 4
Installation ....................................................................................................................................................................................... 4
Mains supply................................................................................................................................................................................... 5
Unit function .................................................................................................................................................................................... 5
Operation........................................................................................................................................................................................ 5
Cleaning.......................................................................................................................................................................................... 6
Accessories ..................................................................................................................................................................................... 6
Technical specifications .................................................................................................................................................................. 7
Dimensions ...................................................................................................................................................................................... 7
Feedback on documentation.......................................................................................................................................................... 7

Installation and operating instructions AEROMAT 150
03.2020 3
Target group of this documentation
This documentation is intended for use by specialists only. All work described in this document is to be performed by
experienced professionals with training and practice in the installation, commissioning and maintenance of ventilation units.
Safe and proper assembly of this unit is not possible without expert knowledge.
Correct use
• The AEROMAT 150 is intended for installation in the exterior windows/walls of permanent structures in accordance with
our installation and design documents as well as the specifications of our assembly instructions and is only suitable for the
ventilation of enclosed rooms.
• Do not use the AEROMAT 150 in environments with corrosive or explosive atmospheres (dust, vapour or gas).
• Use the AEROMAT 150 only with genuine accessories from SIEGENIA.
• Observe the safety regulations for operating electrical equipment and, if necessary, for ladders, steps and work
overhead or at certain heights.
• Use the AEROMAT 150 only when it is in a technically sound condition.
• Do not modify the unit's components in any way.
• Ventilation openings must be kept free and must not be blocked by other equipment, furniture or objects.
• Please do not put any objects on top of the unit.
• In the event of a fault, only have the AEROMAT 150 repaired by experienced specialists with training and practice in the
repair of ventilation units.
• Any use of this product that is not in accordance with its correct use, or any adaptation of or modification to the product
and its associated components for which the express consent of SIEGENIA has not been obtained, is strictly prohibited.
SIEGENIA accepts no liability whatsoever for any material losses or injury to people caused by failure to comply with this
stipulation.

4
AEROMAT 150 Installation and operating instructions
03.2020
Safety notices
Type DK
• This unit can be used by children aged 8 and above as well as by people with physical, sensory or mental difficulties or
with a lack of experience and knowledge as long as they are supervised or have been instructed in how to use the unit
safely and understand the resulting risks. Children must not play with the unit. Cleaning and user maintenance must not be
carried out by children without supervision.
• Electrically operated unit. Risk of fatal injury from electric shock or fire.
To prevent personal injury or damage to property, always comply with the following instructions:
- Work on a 230 V AC mains power supply may only be performed by a qualified electrician.
- If the mains connection cable for the unit is damaged, it must be replaced by SIEGENIA, the company's customer service
department, or similarly qualified personnel in order to prevent personal injury or damage to property.
- All-pole safety isolation is required if the customer is routing the network connection cable.
- All work on the 230 V AC mains power supply must be carried out in compliance with the current German VDE regulations
(e.g. VDE 0100) and any relevant country-specific requirements.
- Relevant country-specific regulations must be strictly followed for all work carried out on the voltage supply system or house
wiring system.
- Should a solid object or any liquid get inside the unit, stop operation immediately and disconnect the AEROMAT 150 from
the mains power supply:
Check whether the AEROMAT 150 is damaged
If necessary, repair work can be performed by experienced professionals
Installation
Prerequisites for installation
• The position from which the outdoor air is drawn in must be selected in such way that any nearby emission sources have
as little impact as possible on the quality of the air being drawn in.
• Installation option: Installation in impost
AEROMAT 150
Installation sequence
1. Carefully remove AEROMAT 150 from the packaging. We recommend placing the unit on a soft surface (e.g. cardboard or
blanket) during installation.
2. Type DD: Close the plate on the front to prevent contamination (e.g. dust) from entering the unit during installation.
3. Install the AEROMAT 150 in its intended installation position and seal it in accordance with the installation directives
applicable on site.
4. Check AEROMAT 150 for cleanliness prior to starting it up. If necessary, clean the unit thoroughly as described in our
operating and maintenance instructions.

Installation and operating instructions AEROMAT 150
03.2020 5
Mains supply
The AEROMAT 150 is connected directly to the 230 V AC mains power supply using an external switch.
Exposed electrical components.
Risk of fatal injury from electric shock or fire.
› Work on a 230 V AC mains power supply may only be performed by a qualified electrician.
› All work on the 230 V AC mains power supply must be carried out in compliance with the current German VDE
regulations (e.g. VDE 0100) and any relevant country-specific requirements.
› Switch off or unscrew the fuses.
Important: If the AEROMAT 150 is connected directly to the 230 V AC mains power supply, a mains isolator must be
installed by the customer.
› Wire the circuit according to this circuit diagram
Connection Type DK Switch assignment
S1 Opening and closing of the locking plate
PE
1
2
3
5
4
6
S1
PE
N
L1
blue 1
brown 2
black 3
Unit function
Pressure differential operation
• The room is ventilated as the indoor and outdoor air pressures are equalised (pressure differential). As this happens, the
air normally flows from outside into the room.
• The air flow into the room varies as the wind pressure changes with the weather.
Operation
1 2
Type DD: The rotary knob allows you to open and close the locking plate. You may continuously adjust the required airflow
between both end positions of the rotary knobs.
Type DK (with 5-wire connecting cable): The locking plate may only be opened and closed by external switches, e.g. AF1,
or controlled via external units.
Locking plate Rotary knob

6
AEROMAT 150 Installation and operating instructions
03.2020
Cleaning
Cleaning the unit!
› Switch off all poles of the mains cable.
› If required, clean the outer parts of the AEROMAT 150's casing using a suitable cloth, which has been moistened with a
mild soap solution or washing-up liquid.
› Never use cleaning agents that are aggressive or contain solvents, as these may damage the surface of the unit.
› When cleaning the unit, prevent liquid from entering the casing.
› Never clean the unit with a high-pressure cleaner or steam-jet cleaner.
Accessories
Please indicate the desired lengths for the aluminium profiles (see order form AEROMAT 150).
Designation Material no. Use
Flush switch AF1, single, white 128032-001 Type DK
Surface-mounted casing for switch AF1, white 149027
Aluminium profile 20 x 20 x 2 mm, white (RAL 9016) aer.winkel 20x20x2 Types DD, DK
Aluminium profile 20 x 20 x 2 mm, silver (EV 1)

Installation and operating instructions AEROMAT 150
03.2020 7
Technical specifications
Specification for a AEROMAT 150 Type DD Type DK
Sound absorption (Rw1.9)44 dB 44 dB
Sound absorption in accordance with DIN EN ISO 20140-10 (Dn,e,w)51 dB 51 dB
Air throughput (approx.) at pressure of
measured with ventilator of 1,200 mm and with weather grille 910 CW-1
2 Pa
4 Pa
5 Pa
7 Pa
8 Pa
10 Pa
20 Pa
29 m³/h
40 m³/h
44 m³/h
51 m³/h
54 m³/h
60 m³/h
82 m³/h
29 m³/h
40 m³/h
44 m³/h
51 m³/h
54 m³/h
60 m³/h
82 m³/h
Electrical connection -230 V∼; 0.01 A
Protection class I -
U-value (calculated in accordance with ISO 6946) 2.7 W/m2K2.7 W/m2K
Cable outlet on the operating side of the ventilator, unit cable approx. 1.5 m -
Surface EV1 silver or RAL 9016 white coated (RAL special colours available on request)
Dimensions
150 mm
154 mm600 - 3.000 mm 190 mm
Depending on the type, the required space increases due to operating elements on the unit.
Feedback on documentation
We welcome your comments and suggestions on how to improve our documentation. Please email your comments to
document[email protected].
Overall depth
without
weather grille
Overall depth
with
weather grille

Contact your dealer:
Head O ce:
Industriestraße 1–3
57234 Wilnsdorf
GERMANY
Phone: [phone]
Telefax: [phone]
[email protected]
www.siegenia.com
SIEGENIA worldwide:
Austria Phone: [phone]
Belarus Phone: [phone]
Benelux Phone: [phone]
China Phone: [phone]
France Phone: [phone]
Germany Phone: [phone]
Great Britain Phone: [phone]
Hungary Phone: [phone]
Italy Phone: [phone]
Poland Phone: [phone]
Russia Phone: [phone]
South Korea Phone: [phone]
Switzerland Phone: [phone]
Turkey Phone: [phone]
Ukraine Phone: [phone]
You can fi nd address details for our
international sites at: www.siegenia.com
H47.FENS013EN/2

СМОТРИТЕ ТАКЖЕ
Проветриватели Вытяжные
вентиляторы
Канальные
вентиляторы
Реверсивные
вентиляторы
Бытовые рекуператоры