Siemens VersiCharge AC User manual

INSTALLATION AND OPERATIONS MANUAL
VersiCharge™AC
Electric vehicle charging station

Contact Information
Siemens Industry, Inc.
Smart Infrastructure
Distribution Systems
 Parkway Ln.
Peachtree Corners, GA 
---
usa.siemens.com/versicharge
FCC Compliance
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
part  of the FCC Rules. These limits are designed to provide reasonable protections against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, this is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance may void the
user’s authority to operate the equipment and the warranty on the product.
Other Information
Product information is subject to change without notice. All trademarks are recognized as the property of
their respective owners.
For Siemens VersiCharge™ Warranty Terms and Conditions, see the Warranty section of this manual.
©  Siemens Industry, Inc. All rights reserved.

VersiCharge™ AC Electric vehicle charging station

Index
 Safety Information 
. Read this First 
. Symbol Legend 
. Safety Instructions (General and Specific) 
. Instructions Pertaining to a Risk of Fire or Electric Shock 
. Code and Standard References 
. Product Labels 
. Definitions 
 Mounting Instructions 
. Equipment List 
.. Kit Supplied Equipment 
.. Standard Installation Equipment 
.. Alternate Installation Equipment 
. Mounting Using a Stud – Recommended Stud Mounting 
. Alternate mounting—Wallboard mounting 
. Install VersiCharge 
. Secure Charger and Install cable holster 
. Check the system 
 For Professional Electricians 
. Outlet Installation Instructions 
.. Removing the Cord-and-Plug Assembly 
. Amperage Adjustment 
.. Dial Settings 
.. Circuit Requirements 
. VersiCharge Units with a Remote Control Interface (Commercial Units) 
. SIM Card Installation – If Not Factory-installed (Commercial Parent Units Only) 
. Ethernet Connection – (Commercial and Smart Residential Units) 
. General Ethernet Network Connection Illustration 
. ModBus Communications Setup 
.. ModBus RTU Connection – (Commercial Units Only) 
.. ModBus Termination Switch Settings – (Commercial Parent/Child Units) 
.. ModBus Termination Switch Settings – (Commercial Child units Only) 
.. General ModBus RTU RS- wiring considerations 
... Setup Details (Using ModBus Poll as an example) 
 RFID Setup (Commercial Units Only) 
 Application Set UP 
. Mobile App User Registration – (Residential Units or Commercial-Single Charger) 
.. Create an Account 
. Link Charger to Your Account (Commercial and Residential Units) 
.. Sign In: 
 Configure/Commission VersiCharge Using the Configurator Tool (Use to Configure Multiple Chargers) 
 HMI 
 Operating VersiCharge 
. LED Light Display 
. VersiCharge Operation 
.. Basic procedure 

VersiCharge™ AC Electric vehicle charging station

... Start charging - RFID Feature 
 Maintenance 
. General exterior maintenance 
. General external checks 
 Warranty 
. Limited Warranty 
 Help! 
Technical Data 
Appendix A – Useful Links 
Appendix B – Wiring Schematics for VersiCharge  A and  A VersiCharge Units 
Appendix C – Hardwire Bending Diagram 
Figures
Figure . Align Mounting Bracket And Screw Into The Stud 
Figure . Alternate Installation Of Versicharge Mounting 
Figure . Slide Versicharge Onto Mounting Hinges 
Figure . Close Versicharge 
Figure . Secure the charger and mount the holster 
Figure . Outlet ground facing down 
Figure . Remove the plug 
Figure . Hard wire VersiCharge 
Figure . Amperage Dial Setting 
Figure . Wire Remote Control Interface 
Figure . Sim Card Installation 
Figure . ModBus Tcp Ethernet Connection 
Figure . Ethernet Connection Wiring 
Figure . ModBus Connection 
Figure . Termination Switch Setting For Parent/Child Units 
Figure . Termination Switch Setting For Child Units Only 
Figure . Serial Modbus Network Wiring Example 
Figure . ModBus RTU setup 
Figure . ModBus setup connection 
Figure . ModBus read/write setup 
Figure . ModBus read/write definition 
Figure . ModBus – write register 
Figure . ModBus – configure register address 
Figure .Residential HMI 
Figure . Commercial HMI 
Figure . Hardwire installation schematic for advanced / a unit 
Figure . Hardwire Bending Diagram 

VersiCharge™ AC Electric vehicle charging station