Siemens CL75 Setup guide

Release 1.0
Service Repair Documentation 10/2005
Backup Tool – CL75 Page 1 of 4
Company Confidential
Backup Tool For
CL75
Release Date Department Notes to change
R1.0 18.10.2005 BenQ CC CES New document
2005©BenQ

Release 1.0
Service Repair Documentation 10/2005
Backup Tool – CL75 Page 2 of 4
Company Confidential
Table Of Contents
1. Installation & Requirements...........................................................................................3
2. Tool Description.............................................................................................................3
3. Clear / Backup / restore customer data...........................................................................4
2005©BenQ

Release 1.0
Service Repair Documentation 10/2005
Backup Tool – CL75 Page 3 of 4
Company Confidential
1. Installation & Requirements
o Hardware Requirements:
- Serial Data Cable L36880-S5601-A800
- ST55 USB adapter F30032-P331-A1
- PC with at least Pentium III, 800 MHz
o Software Requirements:
- Siemens CL75 Backup Tool
- USB FTDI driver for ST55 USB adapter
- Supported OS: Win98, 2K, NT, XP
2. Tool Description
2005©BenQ

Release 1.0
Service Repair Documentation 10/2005
Backup Tool – CL75 Page 4 of 4
Company Confidential
 “Clear User Data”: Delete all user data.
 “Backup User Data”: Copy the user data to PC. The data would be saved
as an encrypted file under the tool installed directory.
 “Restore User Data”: Copy the last saved data back to the handset.
 “Reset”: Reset button.
 “Main window”: Icons to show the state of each port.
In order to increase the download speed and to decrease the operating time,
it is recommended to use the ST55 USB adapter combined with the Siemens
data cable.
3. Clear / Backup / restore customer data
1. Execute the CL75 Backup Tool.
2. Connect the handset to PC using the Siemens data cable or the Siemens data cable +
USB adapter.
3. In case you are using a combination : Siemens data cable + USB adapter the used
interface will change as follow :
To
4. Press the power button to switch the phone on, and to start clearing/restoring/backup
customer data.
2005©BenQ