Siemens MT50 User manual

Be inspired
s
MT
MT
50
50
cyan magenta yellow black
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2002
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.my-siemens.com
MT50_ba_neu 15.03.2002 14:38 Uhr Seite 1

MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:57)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_ClipIt.fm
Thank you for buying a Siemens mobile phone. We wish you a lot of enjoy-
ment and pleasure with it.
If you read through the user guide carefully, you will get to know all the func-
tions of the phone.
In particular, please observe the safety precautions (p. 3) and PIN security
(p. 10).
The front and back covers of the casing (CLIPit™ Covers, my-CLIPit™: p. 12 and
p. 87) can be changed in a matter of seconds - no tools required:
To attach
To remove
Note
Your phone's display and the display cover of the upper shell are delivered with a protective
film. Remove this film before getting started.
In rare cases the static discharge may cause discolouration at the edges of the display.
However this will disappear within 10 minutes.

Contents 1
See also Index at the end of this user guide
M50 en, A31008-H5120-A1-1-7619 (4. März 2002, 10:57)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50IVZ.FM
Safety precautions ..................... 3
Overview phone ......................... 4
General instructions ................... 5
User guide ............................... 5
Soft keys .................................. 5
Getting started ........................... 7
Insert SIM card/battery ............. 7
Charging .................................. 8
Switch on, off/PIN entry ............. 9
Security .................................... 10
Codes .................................... 10
Prevent accidental activation ... 11
My phone ................................. 12
Making a phone call ................. 13
Dialling with number keys ...... 13
End call .................................. 13
Set volume ............................. 13
Redial previous numbers ........ 13
When a number is busy .......... 14
Accept call ............................. 14
Reject call .............................. 14
Hold call ................................. 15
Call waiting/Swap ................... 15
Conference ............................ 16
Call menu .............................. 16
Babysitter ............................... 17
Records .................................. 17
Phonebook ............................... 19
<New entry> .......................... 19
Call/search for an entry ........... 19
Group .................................... 21
Location .................................22
Record no. ..............................23
Assign picture .........................23
Message (SMS) .........................24
Read messages .......................24
Inbox/outbox ..........................25
Archive ...................................25
Compose a message ...............26
Predefined text .......................27
SMS to group ..........................27
Text entry with "T9" ................28
Picture & Sound ......................30
Message setup ........................30
Surf & fun .................................32
Internet (WAP) ........................32
Games & more ........................35
Bitmap viewer ........................37
Select bitmap style .................38
Own greeting .........................38
Screensaver ............................38
Melody manager ....................39
Ringer tones ...........................40
Voice message/Mailbox ............41
Cell broadcast ...........................42
Duration/charges ......................43
Display ...................................43
Charge settings ......................43
Divert ........................................44
See also In-
dex at the
end of this
user guide
Contents

Contents
2
See also Index at the end of this user guide
M50 en, A31008-H5120-A1-1-7619 (4. März 2002, 10:57)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50IVZ.FM
Groups ...................................... 46
SMS to group ......................... 46
Call to group .......................... 46
Group setup ........................... 48
Organiser ................................. 49
Diary ...................................... 49
Greetings ............................... 50
Notes ..................................... 51
Missed alarms ........................ 52
Alarm clock ............................ 52
Clock ......................................... 53
Time/date .............................. 53
Date format ........................... 53
Auto display ........................... 53
Auto phone off ....................... 53
Auto timezone ....................... 53
Profiles ..................................... 54
Setup ..................................... 54
Car Kit .................................... 55
Headset ................................. 55
Aircraft mode ......................... 55
My menu .................................. 56
Fast access key ......................... 57
Left soft key ........................... 57
Speed dialling keys ................. 58
Audio ........................................ 59
Ringer setting ........................ 59
Volume .................................. 59
Call screening ........................ 59
Silent alert ............................. 59
Key tones ............................... 59
Minute beep ...........................60
Information tones ...................60
Melody manager ....................60
Ringer tones ...........................60
Setup ........................................61
Device ....................................61
Security ..................................63
Network .................................64
User group .............................66
During a call ...........................67
Clock ......................................67
Connectivity ...........................67
Accessories .............................70
Fax/data mode using a PC ........72
Notes A-Z ..................................73
Display symbols (selection) ......81
Questions & Answers ................82
Siemens Service ........................85
Specifications/maintenance .....86
Accessories ...............................87
Basics .....................................87
Data/Applications ...................87
Car Solutions ..........................88
Innovations ............................88
Index .........................................89

Safety precautions 3
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:57)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Security.fm
Safety
precautions
Please note:
Switch off in hospitals or in the
vicinity of medical devices, e.g.
pacemakers or hearing aids.
Mobile phones can interfere
with the function of these
devices.
A minimum distance of 20 cm
between pacemaker and mobile
phone should be kept.
When using the mobile phone,
hold it to the ear which is farther
removed from the pacemaker.
Always use the handsfree kit for
calls while driving (p. 70)!
Mobile phones must be
switched off at all times in an
aircraft. To prevent accidental
activation, see (p. 11).
Switch off near petrol stations,
fuel depots, chemical plants or
blasting operations.
Mobile phones can interfere
with the operation of technical
installations.
The ring tone is reproduced
through the earpiece. To avoid
damage to hearing, first accept
the call, then hold the phone to
the ear.
SIM card may be removed.
Caution! Small parts could be
swallowed by children.
The mains voltage specified on
the power supply unit must not
be exceeded.
We recommend you use only
original Siemens batteries
(100% mercury-free) and charg-
ing devices. Otherwise consid-
erable health risks and damage
to the product cannot be exclud-
ed.
Neither the phone nor the bat-
tery (100% mercury-free) may
be opened under any circum-
stances (except when exchang-
ing the battery, SIM card or top
shell). Any other changes to this
device are strictly prohibited, as
they will invalidate the type
approval criteria required for
operation of the unit.
Dispose of used batteries and
phones according to the legal
regulations.
Mobile phones can interfere
with the operation of nearby
TVs, radios or PCs.
We recommend you use only
original Siemens accessories to
avoid possible damage and to
comply with the existing regula-
tions.
Improper use invalidates the warranty!

Overview phone
4
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Overview.fm
Overview
phone
Service provider
01.05.2002 12:30
New SMS Menu
Loudspeaker
Display indicators
Signal strength/
battery level.
Call key W
Select displayed phone
number or name, accept
calls. Display last calls in
standby mode.
Phonebook key
Press once for Phonebook
Press twice for Groups
*Hold down
In standby mode:
Switch signal tones on and
off.
Microphone
Device interface
Connection for charger,
headset etc.
Integrated antenna
Do not interfere with the
phone above the battery
cover unnecessarily. This
reduces the signal strength.
S On/Off/End key
Press briefly:
End call/function and return
to standby mode. In menus:
one menu level back.
Hold down:
Switch phone on/off.
From menus: return to
standby mode.
#Hold down
In standby mode:
Switch key lock on and off.
Soft keys
The current functions of these
keys are displayed in the grey
fields as text or icons.
These keys display the quick
selection and menu in stand-
by mode. Factory default:
§New SMS§ or e.g.
p(SIM service) and
§Menu§ (main menu).
< a
Service provider
01.05.2002 12:30
New SMS Menu
To call up a function dis-
played, press the soft key un-
derneath the function.
Example: Press the right
soft key on the right to call
up the menu.
Press the soft keys on the in-
side to scroll through menus
and lists.

General instructions 5
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
General
instructions User guide
The following symbols are used to
explain operation:
Soft keys
Steps for calling a function are
shown in a condensed form in this
user guide, e.g.: to display the call
list for missed calls:
§Menu
¢Records
¢Missed calls
This corresponds to:
§Menu§ Open menu.
From standby mode:
Press right soft key on the
right.
NScroll to Records.
Press right soft key on the left
to scroll downwards.
JEnter numbers or letters.
SOn/Off/End key.
TPhonebook key.
WCall key.
MN Press on the inside to scroll
up and down.
KL Press on the outside to call a
function (soft key).
§Menu Displays a soft key function.
~Function depends on the
service provider, special
registration may be neces-
sary.
n< a
Service provider
01.05.2002 12:30
New SMS Menu
Help
©Messages
Records
Select
o

General instructions
6
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
§Select§ Press.
Press right soft key on the
right to open the Records sub-
menu.
§Select§ Press.
Press right soft key on the
right to open the list of Missed
calls.
NScroll to the required
entry.
Press right soft key on the left
to scroll downwards.
View Press.
Press left soft key on the left to
display the phone number with
date and time.
Messages
šRecords
Get in touch
Select
p
Missed calls
Calls received
Calls dialled
Select
q
[phone]
Office
Carol
View Options
r
[phone]
Office
Carol
View Options
s
Office
[phone]
01.05.2002 12:30
View Options
t

Getting started 7
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
Getting
started Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored.
If the SIM card has been delivered in
credit card size, snap the smaller
segment out and remove any rough
edges.
• Press grooved area n, then lift
cover o.
• Press latch in the direction indicat-
ed by the arrow p, lift battery at
the cutout on side of the phone,
then tilt upwards and remove q.
• Insert SIM card in the opening
(contacts pointing downwards)
and push gently until it engages
(make sure the angled corner is in
the correct position r).
• Insert battery into the phone side-
ways s, then press downwards
t, until it engages.
• Replace cover and press down-
wards until it engages.
n
o
p
q
Note
Always switch off phone before removing
the battery!
Only 3-Volt SIM cards are supported.
Please contact your service provider, if you
have an older card.
Functions without SIM card ...............p. 80
r
s
t

Getting started
8
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
Charging
The battery is not fully charged
when delivered, so:
• Plug in charger cable at the bot-
tom of the phone, plug in the
power supply unit to the mains
power socket and charge for at
least two hours.
• Push the sides of the charger cable
plug together and pull to remove
it.
Display when charging is in progress
`When charging is in
progress.
eEnd of charging.
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible in an ambient temperature
of 5 °C to 40 °C (the charge icon flash-
es as a warning when the tempera-
ture is 5°C above/below this range).
The voltage specified on the power
supply must not be exceeded.
Charge icon not visible
If the battery is totally discharged no
charge icon is displayed when the
charger is plugged in. It will appear
after two hours at most. In this case
the battery is fully charged after
3-4 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (full-empty):
a}b{c
A beep sounds when the battery is
nearly empty.
Note
The charger heats up when used for
long periods. This is normal and not
dangerous.
Operating times.................................p. 76
Battery care (only NiMH) ...................p. 62
Quality declaration for battery ...........p. 76

Switch on, off/PIN entry 9
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
Switch on,
off/PIN entry Switch on, off
SHold down On/Off/End
key to switch on or off.
Enter PIN
The SIM card can be protected with a
4-8 digit PIN.
JEnter your PIN code using
the number keys (the dis-
play shows a series of as-
terisks, if you make a
mistake press §Clear§).
§OK§ Confirm input with the
right key (press on the
outside).
Logging on to the net-
work will take a few sec-
onds.
Standby mode
When the name of the service pro-
vider appears on the display, the
phone is in standby mode and ready for
use.
Clear OK
Please enter
your PIN:
* * * *
Note
<Signal strength .......................p. 77
pSIM services (optional) .........p. 77
§New SMS§.........................................p. 26
§SOS§.................................................p. 73
Change PIN.......................................p. 10
SIM card problems ............................p. 77
Clear SIM card barring ......................p. 11
Other network....................................p. 64
Set time .............................................p. 53
< a
Service provider
01.05.2002 12:30
New SMS Menu

Security
10
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
Security The phone and SIM card are protect-
ed against misuse by several security
codes.
§Menu
¢Setup ¢Security
¢then select a function
Codes
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
§Select§ Press.
JEnter PIN.
§OK§ Confirm input.
§Change§ Press.
§OK§ Confirm.
Some service providers do not per-
mit this function.
Change PIN
You can change the PIN to any
4-8 digit number you may find easier
to remember.
JEnter old PIN.
§OK§ Press.
J, §OK§ Enter new PIN.
J, §OK§ Repeat new PIN.
Change PIN2
(display only if PIN 2 is available).
Proceed as with Change PIN.
Keep these confidential numbers in a
safe place where you can access them
again if required.
PIN Protects your SIM card (person-
al identification number).
PIN2 This is needed to set the charge
detail display and to access
additional functions on special
SIM cards.
PUK
PUK2 Key code. Used to unlocked
SIM cards after the wrong PIN
has been entered.
Phone
code Protects your phone. Must be
entered at the first security set-
ting.

Security 11
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_Startup.fm
Change phonecode
You define and enter the phone
code (4-8 digits) when calling up a
phone code protected function
(e.g. Babysitter, p. 17) for the first
time. It is then valid for all functions.
If you have forgotten it, please call
Siemens Service (p. 85).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider together with
the SIM card according to instruc-
tions. If PUK (MASTER PIN) has been
lost, please contact your service pro-
vider.
Prevent accidental
activation
Even if PIN entry is deactivated (see
p. 10), confirmation is required to
switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
SHold down.
§OK Press to switch on the
phone.
§Cancel§ Press (or no further input)
to stop switch-on proce-
dure. The phone does not
switch on.
Note
Screensaver...................................... p. 38
Auto key lock..................................... p. 61
Further security settings.................... p. 63
Please confirm switch on
OK Cancel

My phone
12
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENGLISCH\mitLG_Freigabe_020225\DRUCK\MT50_MyPhone.fm
My phone Your phone offers a number of func-
tions so that you can adapt it to meet
your personal requirements.
Ringer tones
Assign individual ring tones to caller
groups or anniversaries (p. 40).
The melody manager is available for
managing the ring tones (p. 39).
Logos, screensavers,
animations
Adjust your phone according to your
own wishes in the following areas to
give it a personal touch:
To switch on
Select a bitmap style (p. 38) and a
greeting (p. 38) that you create
yourself.
Screensaver (p. 38)
You can set an analogue clock or an
individual picture as screensaver.
(Provider) logo (p. 37)
Select an individual picture from the
bitmap viewer.
Where do I get what?
You can order additional ring tones,
logos and screensavers on the
Internet and receive them via SMS:
www.my-siemens.com/ringtones
www.my-siemens.com/logos
www.my-siemens.com/screensaver
Or you can directly download them
via WAP:
wap.my-siemens.com
Siemens City Portal
Further services for your mobile
phone (e.g. a Photo Logo Composer
to create personal pictures for your
Phonebook (p. 23)) can be found at:
www.my-siemens.com/city
The Siemens City Portal also offers a
list of countries in which these serv-
ices are available.
CLIPit™ Covers
Select different colours for the top
and bottom covers from the Siemens
City Portal. Or use a personal photo
to make your phone unique (p. 87):
www.my-siemens.com/my-clipit
My menu
Create your own menu with fre-
quently used functions, phone num-
bers or WAP pages (p. 56).

Making a phone call 13
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENG-
Making a
phone call Dialling with number
keys
The phone must be switched on
(standby mode).
JEnter the number (always
with prefix, if necessary
with the international
dialling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
WPress the Call key. The
phone number displayed
is dialled.
End call
SPress the End key briefly.
Call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
Set volume
MN You can adjust the hand-
set volume with the scroll
keys (only during the
call).
If a Car Kit is used, its volume setting
does not affect the usual setting on
the phone.
Redial previous numbers
To redial the phone number last
called:
WPress the Call key twice.
To redial other numbers that were
dialled previously:
WPress the Call key once.
MN Pick out the required
phone number from the
list, then press ...
W... to dial.
Note
?Store number............................p. 19
§Options§ Call lists.............................p. 17
§Hold§.................................................p. 15
;menu§ Call menu ..........................p. 16
§Divert§ Divert set ..............................p. 73
International dialling codes............... p. 75
Auto key lock.....................................p. 61
Phone number memo........................p. 76
Microphone off ..................................p. 16
Phone number transmission off/on
(Hide ID)............................................p. 67
Control codes (DTMF).......................p. 73

Making a phone call
14
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENG-
When a number is busy
If the called number is busy or can-
not be reached because of network
problems several options are availa-
ble (depending on the service pro-
vider). An incoming call or any other
use of the phone interrupts these
functions.
Either
Auto redial previous numbers
§Auto dial§ Press. The number is auto-
matically dialled for up to
15 minutes at increasing
intervals. End with:
S End key.
or
Call back
§Call back§ Press. Your phone rings
when the busy number is
free. Press the Call key to
dial the number.
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after
15 minutes.
Accept call
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
§Reply§ Press.
or
WPress.
If the phone number has been trans-
mitted by the network, it is dis-
played. If it is stored in the Phone-
book, the corresponding name is
displayed instead.
Reject call
§Reject§ Press.
or
Spress briefly.
~
Note
U Missed calls...........................p. 18
Accept call using any key ..................p. 61
[phone]
Reply Reject
+

Making a phone call 15
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENG-
Hold call
You can call another number during
a call.
§Hold§ The current call is put on
hold. Now dial the new
phone number.
When the connection is established
press...
§Swap§ ... to swap back and forth
between both calls.
Call waiting/Swap
You may need to register for this
service with your service provider
and set your phone accordingly
(p. 67).
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following
options:
Accept the waiting call
§Swap§ Accept the waiting call
and place the current call
on hold.
To swap between the two
calls, press §Swap§ each
time.
End the current call:
SPress. The following que-
ry is displayed: "Return to
the call on hold?"
§Yes§ Return to the held call.
or
§No§ The held call is ended.
Reject waiting call
§Reject§ Reject the waiting call,
the caller will hear the
busy tone.
or
§Divert§ If this is set, the waiting
call will be diverted, to the
mailbox for example.
End current call
SEnd the current call.
§Reply§ Accept the new call.
Note
;menu§ Call menu.......................... p. 16
<
<<
< a
aa
a
Z Z
Carol
Hold A
AA
Amenu
~

Making a phone call
16
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENG-
Conference
Call up to 5 parties one by one and
link them together in a phone con-
ference. Some of the functions de-
scribed may not be supported by
your service provider or must be
enabled specifically.
You have established a connection:
§Hold§ The current call is put on
hold. Now dial a new
number. When the new
connection is estab-
lished...
;menu§ ... open menu and select
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together (up to
5participants).
End
SAll calls in the conference
are ended simultaneously
when the End key is
pressed.
Call menu
The following functions are only
available during a call:
;menu§ Open menu.
~
<
<<
< a
aa
a
Z Z
Carol
Hold A
AA
Amenu
Micro-
phone on Switch microphone on/off.
If switched off, the person
on the other end of the line
cannot hear you (muting).
Alternatively:
* Hold down.
However, numbers being
entered are audible when
Send DTMF tones is active.
Volume Adjust handset volume.
Conference (see left)
Duration/
charges While the connection contin-
ues, the call duration and
(if set, p. 43) the charge de-
tails are displayed.
Send DT-
MF tones (p. 73)
Call
transfer The original call is joined to
the second one. For you,
both calls are now ended.
Main menu Access to the main menu.
Call status List all held and active calls
(e.g. participants in a confer-
ence).
~

Making a phone call 17
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENG-
Babysitter
Only one phone number can be di-
alled. Hold down the right soft key
on the right.
Switch on
§Menu
¢Setup
¢Security ¢Babysitter
§Select§ Press.
JEnter phone code:
When first prompted, you
define and enter the
phone code (4-8 digits).
Please do not forget this
code!
§OK§ Confirm input.
§Change§ Press.
@/ JSelect phone number
from the Phonebook
(p. 19), or enter a new
one (with name).
OK The babysitter is now ac-
tive.
Switch off
#Hold down.
JEnter phone code.
§Change§ Press.
§OK Confirm input.
Records
Your phone stores the phone num-
bers of calls for convenient redial-
ling.
§Menu
¢Records
§Select§ Press.
MN Choose call list.
§Select§ Press.
MN Select phone number.
WDial phone number
or
§View§ Display information on
the phone number.
Note
Change phone code..........................p. 11

Making a phone call
18
MT50 english, A31008-H5120-A1-1-7619 (4. März 2002, 10:58)
© Siemens AG 2001, I:\MOBIL\K45\MT50-Manta-altes Design\ENG-
§Menu
¢Records
¢Select function
The following call lists are available:
Missed calls
The phone numbers of calls that you
have received but not answered can
be recorded for call back purposes.
When you have missed a call, the fol-
lowing icon appears in the display
above the left soft key in standby
mode:
U
If you press the left soft key, the
phone number is displayed.
Requirement:
The network supports the "Caller
Identity" feature.
Calls received
All accepted calls are listed.
Requirement:
The network supports the "Caller
Identity" feature.
Calls dialled
Access to the last ten numbers you
dialled.
WFast access in standby
mode.
Erase records
The contents of all call lists are delet-
ed.
Records menu
The call list menu can be called up if
an entry is highlighted.
§Options§ Open list menu.
~
~
View View entry.
Correct no. Load number into display
and correct it there if nec-
essary.
Save no. to
dStore entry in the Phone-
book.
Delete Delete entry after confirma-
tion.
Delete all Delete all entries of the call
list after confirmation.
Note
NPress the right soft key on the
left in standby mode for easy
access to call lists.