Siemens SIMATIC ET 200SP User manual

Digital output module
RQ 4x120VDC-230VAC/5A NO ST
(6ES7132-6HD00-0BB0)
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
ET 200SP
Digital output module
RQ 4x120VDC-230VAC/5A NO ST
(6ES7132-6HD00-0BB0)
Manual
07/2014
A5E03576775-AB
Preface
Documentation guide
1
Product overview
2
Wiring up
3
Parameters/address space
4
Interrupts/diagnostics alarms
5
Technical specifications
6
Parameter assignment and
structure of the parameter
data record
A

Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E03576775-AB
Ⓟ
07/2014 Subject to change
Copyright © Siemens AG 2012 - 2014.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
4Manual, 07/2014, A5E03576775-AB
Preface
Purpose of the documentation
This device manual supplements the system manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293).
Functions that relate generally to the system are described in this manual.
The information provided in this manual and in the system/function manuals supports you
when commissioning the ET 200SP distributed I/O system.
Conventions
Please pay particular attention to notes highlighted as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product and on the section of the documentation to which particular attention
should be paid.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You can find more information about industrial security on the Internet
(http://www.siemens.com/industrialsecurity).
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You can find more information on the Internet
(http://support.automation.siemens.com).

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
Manual, 07/2014, A5E03576775-AB 5
Table of contents
Preface ................................................................................................................................................... 4
1 Documentation guide .............................................................................................................................. 6
2 Product overview .................................................................................................................................... 8
2.1 Properties.......................................................................................................................................8
3 Wiring up .............................................................................................................................................. 10
3.1 Terminal assignment....................................................................................................................10
3.2 Block diagram ..............................................................................................................................11
4 Parameters/address space ................................................................................................................... 12
4.1 Parameters...................................................................................................................................12
4.2 Explanation of the parameters .....................................................................................................13
4.3 Address space .............................................................................................................................14
5 Interrupts/diagnostics alarms................................................................................................................. 15
5.1 Status and error display ...............................................................................................................15
5.2 Interrupts ......................................................................................................................................17
5.3 Diagnostics alarms.......................................................................................................................17
6 Technical specifications ........................................................................................................................ 18
6.1 Technical specifications ...............................................................................................................18
6.2 Switching cycles...........................................................................................................................22
A Parameter assignment and structure of the parameter data record........................................................ 23
A.1 Parameter assignment and structure of the parameter data record............................................23

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
6Manual, 07/2014, A5E03576775-AB
Documentation guide
1
The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into
three areas.
This arrangement enables you to access the specific content you require.
Basic information
The System Manual and Getting Started describe in detail the configuration,
installation, wiring and commissioning of the SIMATIC distributed I/O system. ET 200SP.
The STEP 7 online help supports you in the configuration and programming.
Device information
Manuals contain a compact description of the module-specific information, such as
properties, terminal diagrams, characteristics, technical specifications.
General information
The function manuals contain detailed descriptions on general topics regarding
the SIMATIC ET 200SP distributed I/O system, e.g. diagnostics, communication,
Motion Control, Web server.
You can download the documentation free of charge from the Internet
(http://w3.siemens.com/mcms/industrial-automation-systems-simatic/en/manual-
overview/tech-doc-et200/Pages/Default.aspx
Changes and supplements to the manuals are documented in a Product Information.

Documentation guide
Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
Manual, 07/2014, A5E03576775-AB 7
Manual Collection ET 200SP
The Manual Collection contains the complete documentation on the SIMATIC ET 200SP
distributed I/O system gathered together in one file.
You can find the Manual Collection on the Internet
(http://support.automation.siemens.com/WW/view/en/84133942).
My Documentation Manager
The My Documentation Manager is used to combine entire manuals or only parts of these to
your own manual.
You can export the manual as PDF file or in a format that can be edited later.
You can find the My Documentation Manager on the Internet
(http://support.automation.siemens.com/WW/view/en/38715968).
Applications & Tools
Applications & Tools supports you with various tools and examples for solving your
automation tasks. Solutions are shown in interplay with multiple components in the system -
separated from the focus in individual products.
You can find Applications & Tools on the Internet
(http://support.automation.siemens.com/WW/view/en/20208582).
CAx Download Manager
The CAx Download Manager is used to access the current product data for your CAx
or CAe systems.
You configure your own download package with a few clicks.
In doing so you can select:
●Product images, 2D dimension drawings, 3D models, internal circuit diagrams,
EPLAN macro files
●Manuals, characteristics, operating manuals, certificates
●Product master data
You can find the CAx Download Manager on the Internet
(http://support.automation.siemens.com/WW/view/en/42455541).

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
8Manual, 07/2014, A5E03576775-AB
Product overview
2
2.1 Properties
Article number
6ES7132-6HD00-0BB0
View of the module
Figure 2-1 View of the module RQ 4×120VDC-230VAC/5A NO ST

Product overview
2.1 Properties
Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
Manual, 07/2014, A5E03576775-AB 9
Properties
The module has the following technical properties:
●Digital output module with 4 floating relay outputs
●Supply voltage L+
●Output current per output 5 A
●Normally open contact (NO: normally open)
●Module-oriented selectable diagnostics
●Substitute value output
●Suitable for solenoid valves, DC contactors, and indicator lights
The module supports the following functions:
●Firmware update
●I&M identification data
●Configuration in RUN
●PROFIenergy
Table 2- 1 Version dependencies of other module functions
Function
Product version of the module
as of
Firmware version of the
module as of
Value status
1
V1.1.0
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories must be ordered separately:
●Labeling strips
●Color identification labels
●Reference identification label
●Shield connector
See also
You will find additional information on the accessories in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual.

Digital output module RQ 4x120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
10 Manual, 07/2014, A5E03576775-AB
Wiring up
3
3.1 Terminal assignment
General terminal assignment
Table 3- 1 Terminal assignment
Terminal assignment for RQ 4×120VDC-230VAC/5A NO ST (6ES7132-6HD00-0BB0)
Terminal Assignment Terminal Assignment Explanation BaseUnit1Color identification label
(terminals 1 to 16)
1 RQ0+ 2 RQ1+ •RQn+, RQn-: Channel n
•AUX: PE terminal
connection or voltage bus
(freely usable up to
230 VAC)
B0 ---
3 RQ2+ 4 RQ3+
5 RQ0- 6 RQ1-
7 RQ2- 8 RQ3-
9 Reserved 10 Reserved
11 Reserved 12 Reserved
1A AUX 2A AUX
3A AUX 4A AUX
Normally open contact
1
Usable BaseUnit types, can be identified by the last two digits of the article number.
Note
The first BaseUnit of a station must be a light-colored BaseUnit. Also keep this in mind
during the configuration.
Since the RQ 4×120VDC-230VAC/5A NO ST digital output module requires a dark
BaseUnit, configuration is possible from the 2nd module.
Note
•The relay contacts of the module may only switch identical voltage potential.
•The AUX terminals may only be used with an associated identical voltage or PE.
See also
You will find additional information on the BaseUnit types in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual.