Siemens SIMOTICS M-1PH8 User manual

TECHNICAL SPECIFICATIONS AND CHARACTERISTICS
1PH8
Edition
Main motor reluctance
12/2022
SIMOTICS M
www.siemens.com/drives

SIMOTICS M
Drive technology
Technical speci󹪝cations and
characteristics SIMOTICS M-1PH8
reluctance motors
Con󹪝guration Manual
12/2022
A5E51895871
Introduction 1
Technical data and
characteristics 2

Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Quali󹪝ed Personnel
The product/system described in this documentation may be operated only by personnel quali󹪝ed for the speci󹪝c
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Quali󹪝ed personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance
are required to ensure that the products operate safely and without any problems. The permissible ambient
conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identi󹪝ed by ® are registered trademarks of SiemensAG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E51895871
Ⓟ 01/2023 Subject to change
Copyright © SiemensAG 2022.
All rights reserved

Table of contents
1 Introduction ........................................................................................................................................... 5
2 Technical data and characteristics......................................................................................................... 7
2.1 Technical speci󹪝cations ........................................................................................................ 7
2.1.1 Shaft height 132 – forced ventilation ................................................................................... 8
2.1.2 Shaft height 160 – forced ventilation ................................................................................... 9
2.1.3 Shaft height 132 – water cooled ........................................................................................ 11
2.1.4 Shaft height 160 – water cooled ........................................................................................ 12
2.2 Characteristics forced ventilation........................................................................................ 13
2.2.1 Shaft height 132 – forced ventilation ................................................................................. 13
2.2.2 Shaft height 160 – forced ventilation ................................................................................. 38
2.3 Characteristics water cooling.............................................................................................. 86
2.3.1 Shaft height 132 – water cooled ........................................................................................ 86
2.3.2 Shaft height 160 – water cooled ...................................................................................... 103
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 3

Table of contents
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
4Con󹪝guration Manual, 12/2022, A5E51895871

Introduction 1
You can 󹪝nd the corresponding Con󹪝guration Manual in the Siemens Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/)
Con󹪝guration Manual 1PH8 (https://
support.industry.siemens.com/cs/de/en/view/109744012)
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 5

Introduction
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
6Con󹪝guration Manual, 12/2022, A5E51895871

Technical data and characteristics 2
2.1 Technical speci󹪝cations
The technical data of the relevant motor version are de󹪝ned by four rated operating points in the
tables.
These four rated operating points also correspond to the data stamped on the rating plate of
the motor and to the data listed in the selection and ordering data sections of the relevant
catalogs.
Table 2-1 Explanation of the abbreviations used
Abbrevia‐
tion
Unit Description
Prated kW Rated power
Mrated Nm Rated torque
Irated A Rated current
Urated V Rated voltage
frated Hz Rated frequency
nrated r/min Rated speed
cos Φ - Power factor
M0Nm Torque (S1) at zero speed
I0A Current (S1) at M0
η - Maximum e󹪟ciency in S1 speed range (in range nopt)
J kgm2Moment of inertia
Tth min Thermal time constant
P_cool kW Heat loss to be dissipated on water-cooled motors
m kg Weight
nmax r/min Maximum permissible speed with bearing type "standard or increased
speed"
nmax,Br r/min Maximum permissible speed with bearing type "Advanced Lifetime" or
built-on holding brake
nopt r/min Speed at optimum operating point
Popt kW Maximum possible power (S1) at the optimum operating point at speed
nopt
Mmax Nm Maximum permissible short-time torque for dynamic processes
Imax A Maximum permissible short-time current at Mmax
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 7

2.1.1 Shaft height 132 – forced ventilation
Table 2-2 1PH8 shaft height 132, forced ventilation (basic data)
Motor type Supply voltage Prated
kW
Mrated
Nm
Irated
A
Urated
V
frated
Hz
nrated
r/min
cos Φ η

J
kgm2
m
kg
1PH8138-5□D□□
Y connection
SLM/BLM 400 V 21 200 62 283 33.3 1000 0.759 0.910 0.093 145
ALM 400 V 24 200 62 324 38.3 1150 0.757 0.913
SLM/BLM 480 V 28.5 200 62 378 45 1350 0.754 0.926
ALM 480 V 31.5 200 62 419 50 1500 0.752 0.928
1PH8138-7□D□□
Y connection
SLM/BLM 400 V 25 240 72 292 33.3 1000 0.76 0.901
ALM 400 V 28.5 240 71 334 38.3 1150 0.757 0.905
SLM/BLM 480 V 33 235 70 389 45 1350 0.754 0.915
ALM 480 V 36 230 70 429 50 1500 0.752 0.917
1PH8138-5□F□□
Y connection
SLM/BLM 400 V 32 205 75 350 50 1500 0.752 0.928
ALM 400 V 37 205 75 406 58.3 1750 0.75 0.931
SLM/BLM 480 V 42 200 75 448 66.7 2000 0.768 0.931
ALM 480 V 46.5 200 75 498 73.3 2200 0.761 0.932
1PH8138-7□F□□
Y connection
SLM/BLM 400 V 38 240 87 361 50 1500 0.752 0.918
ALM 400 V 43.5 235 85 415 58.3 1750 0.754 0.921
SLM/BLM 480 V 47 225 83 448 66.7 2000 0.777 0.92
ALM 480 V 51 220 81 498 73.3 2200 0.769 0.922
1PH8138-5□G□□
Y connection
SLM/BLM 400 V 43 205 95 370 66.7 2000 0.752 0.943
ALM 400 V 49.5 205 95 415 76.7 2300 0.764 0.945
SLM/BLM 480 V 55 198 95 448 88.3 2650 0.783 0.946
ALM 480 V 60 205 95 498 93.3 2800 0.766 0.947
1PH8138-7□G□□
Y connection
SLM/BLM 400 V 48 230 104 370 66.7 2000 0.764 0.933
ALM 400 V 54 220 102 415 76.7 2300 0.77 0.935
SLM/BLM 480 V 57 205 99 448 88.3 2650 0.784 0.936
ALM 480 V 61 210 97 498 93.3 2800 0.768 0.937
Technical data and characteristics
2.1Technical speci󹪝cations
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
8Con󹪝guration Manual, 12/2022, A5E51895871

2.1.2 Shaft height 160 – forced ventilation
Table 2-3 1PH8 shaft height 160, forced ventilation (basic data)
Motor type Supply voltage Prated
kW
Mrated
Nm
Irated
A
Urated
V
frated
Hz
nrated
r/min
cos Φ η

J
kgm2
m
kg
1PH8165-5□D□□
Y connection
SLM/BLM 400 V 35 335 97 298 33.3 1000 0.749 0.923 0.183 221
ALM 400 V 40 335 97 342 38.3 1150 0.747 0.926
SLM/BLM 480 V 47 335 97 400 45 1350 0.745 0.935
ALM 480 V 52 335 97 443 50 1500 0.743 0.937
1PH8165-7□D□□
Y connection
SLM/BLM 400 V 39 370 106 304 33.3 1000 0.749 0.914
ALM 400 V 43.5 365 104 347 38.3 1150 0.747 0.917
SLM/BLM 480 V 49.5 350 101 404 45 1350 0.745 0.923
ALM 480 V 53.5 340 99 445 50 1500 0.743 0.925
1PH8165-5□F□□
Y connection
SLM/BLM 400 V 45 285 107 344 50 1500 0.743 0.948
ALM 400 V 52 285 107 401 58.3 1750 0.741 0.95
SLM/BLM 480 V 60 285 107 448 66.7 2000 0.753 0.947
ALM 480 V 66 285 107 498 73.3 2200 0.745 0.949
1PH8165-7□F□□
Y connection
SLM/BLM 400 V 56 355 128 359 50 1500 0.744 0.938
ALM 400 V 63 345 124 415 58.3 1750 0.742 0.94
SLM/BLM 480 V 68 325 120 448 66.7 2000 0.766 0.939
ALM 480 V 73 315 117 498 73.3 2200 0.757 0.94
1PH8165-5□G□□
Y connection
SLM/BLM 400 V 51 245 110 370 66.7 2000 0.765 0.956
ALM 400 V 58 245 110 415 76.7 2300 0.771 0.957
SLM/BLM 480 V 64 230 110 448 88.3 2650 0.782 0.958
ALM 480 V 70 240 110 498 93.3 2800 0.773 0.959
1PH8165-7□G□□
Y connection
SLM/BLM 400 V 68 325 143 370 66.7 2000 0.781 0.949
ALM 400 V 74 310 138 415 76.7 2300 0.782 0.95
SLM/BLM 480 V 77 275 132 448 88.3 2650 0.785 0.951
ALM 480 V 82 280 128 498 93.3 2800 0.781 0.951
Technical data and characteristics
2.1Technical speci󹪝cations
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 9

Motor type Supply voltage Prated
kW
Mrated
Nm
Irated
A
Urated
V
frated
Hz
nrated
r/min
cos Φ η

J
kgm2
m
kg
1PH8167-5□D□□
Y connection
SLM/BLM 400 V 39 370 96 335 33.3 1000 0.751 0.925 0.214 244
ALM 400 V 45 370 96 383 38.3 1150 0.748 0.929
SLM/BLM 480 V 52 370 96 448 45 1350 0.747 0.937
ALM 480 V 58 370 96 498 50 1500 0.745 0.939
1PH8167-7□D□□
Y connection
SLM/BLM 400 V 44 420 106 342 33.3 1000 0.751 0.917
ALM 400 V 49 410 104 390 38.3 1150 0.749 0.92
SLM/BLM 480 V 56 395 101 448 45 1350 0.755 0.926
ALM 480 V 60 385 99 498 50 1500 0.749 0.927
1PH8167-5□F□□
Y connection
SLM/BLM 400 V 56 355 132 345 50 1500 0.74 0.951
ALM 400 V 65 355 132 402 58.3 1750 0.74 0.952
SLM/BLM 480 V 74 355 132 448 66.7 2000 0.756 0.95
ALM 480 V 82 355 132 498 73.3 2200 0.749 0.951
1PH8167-7□F□□
Y connection
SLM/BLM 400 V 63 400 146 352 50 1500 0.74 0.940
ALM 400 V 71 385 141 408 58.3 1750 0.74 0.942
SLM/BLM 480 V 78 370 137 448 66.7 2000 0.761 0.941
ALM 480 V 82 355 132 498 73.3 2200 0.749 0.941
1PH8167-5□G□□
Y connection
SLM/BLM 400 V 68 325 145 370 66.7 2000 0.767 0.959
ALM 400 V 78 320 145 415 76.7 2300 0.774 0.96
SLM/BLM 480 V 85 305 145 448 88.3 2650 0.785 0.961
ALM 480 V 94 320 145 498 93.3 2800 0.776 0.959
1PH8167-7□G□□
Y connection
SLM/BLM 400 V 81 390 170 370 66.7 2000 0.777 0.951
ALM 400 V 89 370 165 415 76.7 2300 0.78 0.952
SLM/BLM 480 V 94 335 159 448 88.3 2650 0.785 0.949
ALM 480 V 101 345 155 498 93.3 2800 0.779 0.95
Technical data and characteristics
2.1Technical speci󹪝cations
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
10 Con󹪝guration Manual, 12/2022, A5E51895871

2.1.3 Shaft height 132 – water cooled
Table 2-4 1PH8 shaft height 132, water cooling (basic data)
Motor type Supply voltage Prated
kW
Mrated
Nm
Irated
A
Urated
V
frated
Hz
nrated
r/min
cos Φ η

J
kgm2
P_cool
kW
m
kg
1PH8138-5□F2□
Y connection
SLM/BLM 400 V 32 205 84 315 50 1500 0.748 0.928 0.093 3.4 163
ALM 400 V 37 205 84 366 58.3 1750 0.747 0.931
SLM/BLM 480 V 42.5 205 84 417 66.7 2000 0.745 0.931
ALM 480 V 46.5 200 84 458 73.3 1750 0.744 0.932
1PH8138-7□F2□
Y connection
SLM/BLM 400 V 40 255 102 330 50 1500 0.743 0.919 3.8
ALM 400 V 45.5 250 100 381 58.3 1750 0.741 0.922
SLM/BLM 480 V 51 240 98 432 66.7 2000 0.741 0.922
ALM 480 V 54 235 96 472 73.3 1750 0.74 0.923
1PH8138-5□G2□
Y connection
SLM/BLM 400 V 50 240 125 333 66.7 2000 0.741 0.934 4.4
ALM 400 V 57 240 125 382 76.7 2300 0.74 0.936
SLM/BLM 480 V 66 240 125 439 88.3 2650 0.739 0.938
ALM 480 V 70 240 125 463 93.3 2800 0.738 0.939
1PH8138-7□G2□
Y connection
SLM/BLM 400 V 63 300 153 350 66.7 2000 0.731 0.926 5.5
ALM 400 V 71 295 151 399 76.7 2300 0.73 0.928
SLM/BLM 480 V 80 290 148 448 88.3 2650 0.742 0.93
ALM 480 V 83 285 146 481 93.3 2800 0.73 0.931
Technical data and characteristics
2.1Technical speci󹪝cations
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 11

2.1.4 Shaft height 160 – water cooled
Table 2-5 1PH8 shaft height 160, forced ventilation (basic data)
Motor type Supply voltage Prated
kW
Mrated
Nm
Irated
A
Urated
V
frated
Hz
nrated
r/min
cos Φ η

J
kgm2
P_cool
kW
m
kg
1PH8165-5□F2□
Y connection
SLM/BLM 400 V 55 350 146 310 50 1500 0.743 0.938 0.183 4.1 260
ALM 400 V 64 350 146 361 58.3 1750 0.742 0.94
SLM/BLM 480 V 73 350 146 412 66.7 2000 0.74 0.94
ALM 480 V 81 350 145 452 73.3 2200 0.739 0.941
1PH8165-7□F2□
Y connection
SLM/BLM 400 V 70 445 179 325 50 1500 0.736 0.93 5.1
ALM 400 V 80 435 176 377 58.3 1750 0.735 0.932
SLM/BLM 480 V 89 425 174 428 66.7 2000 0.734 0.932
ALM 480 V 96 415 171 468 73.3 2200 0.734 0.928
1PH8165-5□G2□
Y connection
SLM/BLM 400 V 77 370 178 357 66.7 2000 0.738 0.951 5
ALM 400 V 89 370 178 410 76.7 2300 0.737 0.952
SLM/BLM 480 V 101 365 178 448 88.3 2650 0.765 0.95
ALM 480 V 108 370 178 498 93.3 2800 0.735 0.951
1PH8165-7□G2□
Y connection
SLM/BLM 400 V 91 435 205 369 66.7 2000 0.733 0.938 5.3
ALM 400 V 102 425 200 415 76.7 2300 0.742 0.94
SLM/BLM 480 V 112 405 196 448 88.3 2650 0.767 0.941
ALM 480 V 118 405 193 498 93.3 2800 0.744 0.942
1PH8167-5□F2□
Y connection
SLM/BLM 400 V 62 395 145 348 50 1500 0.744 0.94 0.214 4.3 283
ALM 400 V 72 395 145 405 58.3 1750 0.743 0.942
SLM/BLM 480 V 82 390 145 448 66.7 2000 0.762 0.941
ALM 480 V 91 395 145 498 73.3 2200 0.754 0.938
1PH8167-7□F2□
Y connection
SLM/BLM 400 V 78 500 178 365 50 1500 0.738 0.932 5.2
ALM 400 V 89 490 176 415 58.3 1750 0.749 0.934
SLM/BLM 480 V 98 470 173 448 66.7 2000 0.77 0.928
ALM 480 V 106 460 170 498 73.3 2200 0.764 0.93
1PH8167-5□G2□
Y connection
SLM/BLM 400 V 84 400 177 370 66.7 2000 0.776 0.952 5
ALM 400 V 95 395 177 415 76.7 2300 0.78 0.949
SLM/BLM 480 V 103 370 177 448 88.3 2650 0.785 0.95
ALM 480 V 114 390 177 498 93.3 2800 0.781 0.951
1PH8167-7□G2□
Y connection
SLM/BLM 400 V 96 460 202 370 66.7 2000 0.777 0.939 5.3
ALM 400 V 106 440 197 415 76.7 2300 0.779 0.94
SLM/BLM 480 V 110 400 191 448 88.3 2650 0.78 0.941
ALM 480 V 121 415 188 498 93.3 2800 0.781 0.942
Technical data and characteristics
2.1Technical speci󹪝cations
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
12 Con󹪝guration Manual, 12/2022, A5E51895871

2.2 Characteristics forced ventilation
2.2.1 Shaft height 132 – forced ventilation
Technical data and characteristics
2.2Characteristics forced ventilation
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 13

Technical data and characteristics
2.2Characteristics forced ventilation
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
14 Con󹪝guration Manual, 12/2022, A5E51895871

Technical data and characteristics
2.2Characteristics forced ventilation
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 15

Technical data and characteristics
2.2Characteristics forced ventilation
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
16 Con󹪝guration Manual, 12/2022, A5E51895871

Technical data and characteristics
2.2Characteristics forced ventilation
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
Con󹪝guration Manual, 12/2022, A5E51895871 17

Technical data and characteristics
2.2Characteristics forced ventilation
Technical speci󹪝cations and characteristics SIMOTICS M-1PH8 reluctance motors
18 Con󹪝guration Manual, 12/2022, A5E51895871