806834A01
Door Mount Rotary Handle Operator
Accionamiento Giratorio de Montaje en la Puerta
Mise en marche giratoire d'assemblage dans la porte
1 / 6
s
Installation Instructions / Instructivo de Instalación
For Use With Frame NG, PG
Para Usar Con Caja Base NG, PG
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death orserious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death orserious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
I.L. No. 806834A01
L =
RHVPS12 / 3VL98003JJ11
RHVPS24 / 3VL98003JJ21
( L = 12.0”)
( L = 24.0”)
No.8 X .38“
RHVPS03 / 3VL98003JJ01
3.0”
U.S. Cat. No. Euro Order No.
Item: RHVPS03 3VL98003JJ01
RHVPS12 3VL98003JJ11
RHVPS24 3VL98003JJ21
U.S. Cat. No. Euro Order No.
RHVPEMH 3VL98003JG01
RHVP4XH 3VL98003JF41
RHVPBM 3VL98003JE01
RHVP3RH 3VL98003JF01
1/8“
Cal. ISO 6789
Ø = .28“
[ Ø = 7.1 mm ]
7/16“
RHVP3RH Suitable For Type 1, 2, 3, 3R, 12, 12K and 13 enclosures
[ Apto par tipo 1, 2, 3, 3R, 12, 12K and 13 caja ]
RHVPEMH Suitable For Type 1, 2, 3, 3R, 12, 12K and 13 enclosures
[ Apto par tipo 1, 2, 3, 3R, 12, 12K and 13 caja ]
RHVP4XH Suitable For Type 1, 2, 3, 3R, 4, 4X, 12, 12K and 13 enclosures
[ Apto par tipo 1, 2, 3, 3R, 4, 4X, 12, 12K and 13 caja ]
NOTE - These instructions do not purport to cover
all details or variations in equipment, or to provide
for every possible contingency to be met in
connection with installation, operation or maintenance.
Should further information be desired or
should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes,
the matter should be referred to the local Siemens
sales office. The contents of this instruction
manual shall not become part of or modify any
prior or existing agreement, commitment or
relationship. The sales contract contains the entire
obligation of Siemens. The warranty contained in
the contract between the parties is the sole
warranty of Siemens. Any statements contained
herein do not create new warranties or modify the
existing warranty.
Trademarks - Unless otherwise noted, all names
identified by ® are registered trademarks of
Siemens AG or Siemens Industry, Inc.
The remaining trademarks in this publication may
be trademarks whose use by third parties for their
own purposes could violate the rights of the owner.
