Siemens SITRANS L Administrator guide

SITRANS LR560
SITRANS L
Radar transmitters
SITRANS LR560
Compact Operating Instructions
02/2022
A5E39693895
-AC
Introduction
1
Safety notes
2
Installing/mounting
3
Connecting
4
Commissioning
5
Remote operation
6
Service and maintenance
7
Technical data
8
Product documentation and
support
A

Siemens AG
Digital Industries
Postfach 48 48
90026 NÜRNBERG
GERMANY
Document order number: A5E39693895
Ⓟ
04/2022 Subject to change
Copyright © Siemens AG 2019.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SITRANS LR560
Compact Operating Instructions, 02/2022, A5E39693895-AC 3
Table of contents
1 Introduction ........................................................................................................................................... 6
1.1 Industrial use note............................................................................................................... 6
1.2 Purpose of this documentation ............................................................................................ 6
1.3 Security information ............................................................................................................ 7
1.4 Checking the consignment................................................................................................... 7
1.5 Transportation and storage.................................................................................................. 8
1.6 Notes on warranty ............................................................................................................... 8
2 Safety notes........................................................................................................................................... 9
2.1 Preconditions for use ........................................................................................................... 9
2.1.1 Safety marking symbols ....................................................................................................... 9
2.1.2 Laws and directives.............................................................................................................. 9
2.1.3 Improper device modifications ........................................................................................... 10
2.1.4 Federal Communications Commission (FCC) conformity (US).............................................. 10
2.1.5 Radio equipment compliance (Europe and UK)................................................................... 11
2.1.6 Industry Canada................................................................................................................. 11
2.1.7 Conformity with European directives.................................................................................. 12
2.1.8 Conformity with UK regulations ......................................................................................... 12
2.2 Use in hazardous areas ...................................................................................................... 13
2.3 Requirements for special applications................................................................................. 13
3 Installing/mounting ............................................................................................................................. 14
3.1 Basic safety notes .............................................................................................................. 14
3.1.1 Exceeded maximum permissible operating pressure........................................................... 15
3.1.2 Installation location requirements...................................................................................... 16
3.1.3 Proper mounting ............................................................................................................... 17
3.1.3.1 Incorrect mounting............................................................................................................ 17
3.2 Installation instructions...................................................................................................... 18
3.2.1 Environment...................................................................................................................... 18
3.2.2 Nozzle location .................................................................................................................. 18
3.2.3 Aimer adjustment .............................................................................................................. 19
3.2.4 Air purging system............................................................................................................. 19
3.2.5 Pressure equipment directive (PED, 2014/68/EU) and UK Pressure Equipment
Regulations 2016 (SI 2016/1105)....................................................................................... 20
3.3 Disassembly....................................................................................................................... 21

Table of contents
SITRANS LR560
4Compact Operating Instructions, 02/2022, A5E39693895-AC
4 Connecting .......................................................................................................................................... 22
4.1 Basic safety notes .............................................................................................................. 22
4.1.1 Incorrect connection to power source ................................................................................ 23
4.1.2 Note on electromagnetic compatibility............................................................................... 24
4.2 Device status icons ............................................................................................................ 25
4.3 Connecting SITRANS LR560................................................................................................ 25
4.4 Nameplates for hazardous area installations....................................................................... 27
4.5 Instructions specific to hazardous area installations............................................................ 29
4.5.1 European ATEX Directive 2014/34/EU, Annex II, 1.0.6 and UK Regulation SI 2016/1107 ...... 29
4.5.2 Special conditions of use.................................................................................................... 30
5 Commissioning .................................................................................................................................... 31
5.1 Basic safety notes .............................................................................................................. 31
5.2 Activating the radar device................................................................................................. 32
5.3 The LCD display ................................................................................................................. 33
5.4 Commissioning via local display ......................................................................................... 34
5.4.1 Local operation.................................................................................................................. 34
5.4.2 Quick Start Wizard via the local display push buttons.......................................................... 35
5.5 Commissioning via handheld programmer ......................................................................... 36
5.5.1 Handheld programmer (Part No. 7ML1930-1BK) ................................................................ 36
5.5.2 Lithium batteries ............................................................................................................... 36
5.5.3 Key functions in measurement mode ................................................................................. 37
5.5.4 Programming .................................................................................................................... 38
5.5.4.1 Quick Start Wizard via the handheld programmer............................................................... 41
6 Remote operation................................................................................................................................ 45
6.1 Operating via SIMATIC PDM ............................................................................................... 45
6.2 Operating via AMS Device Manager.................................................................................... 45
6.3 Operating via FDT (Field Device Tool)................................................................................. 45
6.4 Communication................................................................................................................. 45
6.4.1 HART ................................................................................................................................. 46
6.4.2 PROFIBUS PA...................................................................................................................... 46
6.4.3 FOUNDATION FIELDBUS ..................................................................................................... 46
7 Service and maintenance .................................................................................................................... 47
7.1 Basic safety notes .............................................................................................................. 47
7.1.1 Maintenance ..................................................................................................................... 47
7.1.2 Leaks in the sample gas path.............................................................................................. 48
7.2 Cleaning............................................................................................................................ 48
7.3 Maintenance and repair work............................................................................................. 49
7.3.1 Enclosure open.................................................................................................................. 50
7.4 Return procedure............................................................................................................... 51
7.4.1 Return procedure............................................................................................................... 51
7.5 Disposal............................................................................................................................. 51

Table of contents
SITRANS LR560
Compact Operating Instructions, 02/2022, A5E39693895-AC 5
8 Technical data...................................................................................................................................... 52
8.1 Performance ...................................................................................................................... 52
8.2 Power................................................................................................................................ 53
8.3 Construction...................................................................................................................... 53
8.4 Operating conditions ......................................................................................................... 54
8.5 Process .............................................................................................................................. 55
8.6 Approvals .......................................................................................................................... 56
8.7 Communication ................................................................................................................. 57
A Product documentation and support................................................................................................... 58
A.1 Product documentation ..................................................................................................... 58
Index .................................................................................................................................................... 60

SITRANS LR560
6Compact Operating Instructions, 02/2022, A5E39693895-AC
Introduction
1
1.1 Industrial use note
Note
Use in a domestic environment
This Class B Group 1 equipment is intended for use in industrial areas.
1.2 Purpose of this documentation
These instructions are a brief summary of important features, functions and safety
information, and contain all information required for safe use of the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons who install and commission the device.
To realize optimum performance from the device, read the complete operating instructions.

Introduction
1.3 Security information
SITRANS LR560
Compact Operating Instructions, 02/2022, A5E39693895-AC 7
1.3 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity.
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer’s exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity.
1.4 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
•
Do not use damaged or incomplete devices.

Introduction
1.5 Transportation and storage
SITRANS LR560
8Compact Operating Instructions, 02/2022, A5E39693895-AC
1.5 Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
•Keep the original packaging for subsequent transportation.
•Devices/replacement parts should be returned in their original packaging.
•If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
NOTICE
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
•
Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in Operating
conditions (Page 54).
1.6 Notes on warranty
The contents of this manual shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. The sales contract contains all obligations on
the part of Siemens as well as the complete and solely applicable warranty conditions. Any
statements regarding device versions described in the manual do not create new warranties
or modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right
to make technical changes in the course of further development.

SITRANS LR560
Compact Operating Instructions, 02/2022, A5E39693895-AC 9
Safety notes
2
2.1 Preconditions for use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
2.1.1 Safety marking symbols
In manual
On product
Description
(Label on product:
yellow back-
ground.)
WARNING: refer to accompanying documents (manual) for
details.
2.1.2 Laws and directives
Observe the safety rules, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
•National Electrical Code (NEC - NFPA 70) (USA)
•Canadian Electrical Code (CEC Part I) (Canada)
Further provisions for hazardous area applications are for example:
•IEC 60079-14 (international)
•EN 60079-14 (EU and UK)

Safety notes
2.1 Preconditions for use
SITRANS LR560
10 Compact Operating Instructions, 02/2022, A5E39693895-AC
2.1.3 Improper device modifications
WARNING
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
•Only carry out modifications that are described in the instructions for the device. Failure
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
2.1.4 Federal Communications Commission (FCC) conformity (US)
US Installations only: Federal Communications Commission (FCC) rules
•This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
•This device has also been tested and found to comply with the limits §15.256, Subpart C-
Intentional radiators, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
•This device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications, in which case the user will be required to correct the interference
at his/her own expense.
•This device may be used to measure levels in open air environments or outside enclosed
tanks, subject to the following conditions:
–Devices shall be installed and maintained to ensure a vertically downward orientation
of the transmit antenna's main beam.
–Devices shall be installed only at fixed locations. Devices shall not operate while being
moved or while inside a moving container.
–Hand-held applications and residential use are prohibited.