
806822A02
s
1 / 3
Shunt Trip
Bobina de Apertura
Déclencheur à émission de courant
1
Installation Instructions / Instructivo de Instalación
Trip
[ Interrumpir ]
1a
I.L. No. 806822A02
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before powersupplying this deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement depouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
STRPM60
STRPN120
STRPS277
STRPV600 V ~
50 / 60 HZ
V
STRPB24DC
STRPC60DC
STRPD125DC
STRPE250DC
3VL9800-1SM01 = 48-60V
3VL9800-1SR01 = 110-127V
3VL9800-1ST01 = 208-277V
3VL9800-1SV01 = 380-600V
3VL9800-1SC01 = 24V
3VL9800-1SJ01 = 48 - 60V
3VL9800-1SK01 = 110-127V
3VL9800-1SQ01 = 220-250V
For Use With Frame MG, NG, PG
Para Usar Con Caja Base MG, NG, PG
3VL9800-1SC01
3VL9800-1SJ01
3VL9800-1SK01
3VL9800-1SQ01
Item: STRPB24DC
STRPC60DC
STRPD125DC
STRPE250DC
U.S. Cat. No. Euro Order No.
STRPM60
STRPN120
STRPS277
STRPV600
3VL9800-1SM01
3VL9800-1SR01
3VL9800-1ST01
3VL9800-1SV01
U.S. Cat. No. Euro Order No.
1b
1c
Cat No: STRPN120
VL Shunt Trip
Disp. de Apertura
110-127V 50/60Hz
3.9 Amp Inrush
MLFB: 3VL9800-1SR00
Cat No: STRPN120
VL Shunt Trip
Disp. de Apertura
110-127V 50/60Hz
3.9 Amp Inrush
MLFB: 3VL9800-1SR00
NOTE - These instructions do not purport to cover all details or
variations in equipment, or to provide for every possible
contingency to be met in connection with installation, operation or
maintenance. Should further information be desired or should
particular problems arise, which are not covered sufficiently for
the purchaser’s purposes, the matter should be referred to the
local Siemens sales office. The contents of this instruction manual
shall not become part of or modify any prior or existing
agreement, commitment or relationship. The sales contract
contains the entire obligation of Siemens. The warranty contained
in the contract between the parties is the sole warranty of
Siemens. Any statements contained herein do not create new
warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ®
are registered trademarks of Siemens AG or Siemens Industry,
Inc. The remaining trademarks in this publication may be
trademarks whose use by third parties for their own purposes
could violate the rights of the owner.
Cal. ISO 6789