Siemens SIMATIC IPC477E User manual

___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
Industrial PC
SIMATIC IPC477E
Operating Instructions
12/2016
A5E37455003
-AB
Preface
Overview
1
Safety instructions
2
Mounting and connecting the
device
3
Commissioning the device
4
Operating the device and
device functions
5
Expanding the device and
assigning device parameters
6
Maintaining and servicing
your device
7
Technical information
8
Technical support
A
Markings and symbols
B
List of abbreviations
C

Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E37455003-AB
Ⓟ
12/2016 Subject to change
Copyright © Siemens AG 2016.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 3
Preface
Purpose of the Operating Instructions
These operating instructions contain all the information you need for commissioning and
operating the SIMATIC IPC477E.
It is intended both for programming and testing personnel who commission the device and
connect it with other units (automation systems, programming devices), as well as for service
and maintenance personnel who install add-ons or carry out fault/error analyses.
Basic knowledge required
A solid background in personal computers and Microsoft operating systems is required to
understand this manual. General knowledge in the field automation control engineering is
recommended.
Scope of the operating instructions
These operating instructions apply to "SIMATIC IPC477E" industrial PCs with article
numbers 6AV7241... (built-in unit).
Scope of this documentation
The documentation for the IPC includes the following:
●Product information, e.g. "Important notes on your device"
●Quick Install Guide SIMATIC IPC477E
●SIMATIC IPC477E Operating Instructions
The documentation is supplied with the IPC in multiple languages as PDF on the USB stick
supplied in the documentation package.

Preface
SIMATIC IPC477E
4Operating Instructions, 12/2016, A5E37455003-AB
Conventions
In these operating instructions, "device" is used as the standard term for
"SIMATIC IPC477E" (built-in unit).
In these operating instructions, the terms "Windows Embedded Standard 7 P" and
"Windows Embedded Standard 7 E" are also abbreviated with the term "Windows
Embedded Standard". "Windows 7" is used as an abbreviation for "Windows 7 Ultimate".
A touch device generally refers to a device with a capacitive multi-touch screen or a resistive
single touch screen. Touch screen is the general term for a resistive single touch screen or a
capacitive multi-touch screen.
Note
A note is important information about the product, handling the product or a reference to
specific sections of the
documentation that require special consideration.
History
The following editions of these operating instructions have already been published:
Edition
Comments
10/2016
First edition
12/2016
Amendment to the multi-touch devices

SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 5
Table of contents
Preface ...................................................................................................................................................... 3
1 Overview.................................................................................................................................................... 9
1.1 Product description ...................................................................................................................9
1.2 Design of the built-in units ......................................................................................................12
1.2.1 Devices with resistive single touch screen .............................................................................12
1.2.2 Devices with capacitive multi-touch screen ............................................................................13
1.2.3 Devices with expansions ........................................................................................................14
1.2.3.1 Devices with PCIe card...........................................................................................................14
1.2.4 Interfaces and operator controls for devices with 24 V DC power supply..............................15
1.2.5 Interfaces and operator controls for devices with 100-240 V AC power supply.....................15
1.3 Accessory kit...........................................................................................................................16
1.4 Accessories.............................................................................................................................16
2 Safety instructions ................................................................................................................................... 19
2.1 General safety instructions .....................................................................................................19
2.2 Notes on usage.......................................................................................................................22
3 Mounting and connecting the device........................................................................................................ 25
3.1 Preparing for mounting ...........................................................................................................25
3.1.1 Checking the delivery package...............................................................................................25
3.1.2 Device identification data........................................................................................................27
3.1.3 Built-in unit ..............................................................................................................................29
3.1.3.1 Permitted mounting positions .................................................................................................29
3.1.3.2 Preparing the mounting cutout................................................................................................31
3.2 Installing the built-in unit .........................................................................................................33
3.2.1 Installation guidelines .............................................................................................................33
3.2.2 Mounting clips or mounting brackets, position for IP65-compliant installation .......................35
3.2.3 Mounting the device with mounting clips ................................................................................36
3.2.4 Mounting the device with mounting brackets..........................................................................38
3.2.5 Position of the mounting clips for IP66-complaint installation ................................................40
3.3 Connecting the device ............................................................................................................41
3.3.1 Notes on connecting ...............................................................................................................41
3.3.2 Power supply built-in unit........................................................................................................43
3.3.2.1 Connecting the protective earth..............................................................................................43
3.3.2.2 Connect 100-240 VAC power supply......................................................................................45
3.3.2.3 Connecting the terminal..........................................................................................................48
3.3.2.4 Connecting the 24 V DC power supply...................................................................................49
3.3.3 Connecting peripheral equipment...........................................................................................51
3.3.4 Connecting the device to networks.........................................................................................52
3.3.5 Securing cables on the built-in unit.........................................................................................53
3.3.5.1 Attaching the strain relief ........................................................................................................53

Table of contents
SIMATIC IPC477E
6Operating Instructions, 12/2016, A5E37455003-AB
4 Commissioning the device....................................................................................................................... 57
4.1 General information on commissioning ................................................................................. 57
4.2 Initial commissioning.............................................................................................................. 58
4.3 Windows Action Center.......................................................................................................... 60
5 Operating the device and device functions .............................................................................................. 61
5.1 Operator input options ........................................................................................................... 61
5.2 Operating a device with resistive single touch screen........................................................... 62
5.3 Operating a device with capacitive multi-touch screen.......................................................... 63
5.4 IPC Driver and Tools.............................................................................................................. 65
5.5 Extended device functions..................................................................................................... 66
5.5.1 Monitoring functions............................................................................................................... 66
5.5.1.1 Overview of the monitoring functions..................................................................................... 66
5.5.1.2 Temperature monitoring/display ............................................................................................ 67
5.5.1.3 Watchdog (WD)...................................................................................................................... 68
5.5.1.4 Battery monitoring.................................................................................................................. 69
5.5.1.5 Mass storage monitoring........................................................................................................ 69
5.5.2 Enhanced Write Filter (EWF)................................................................................................. 70
5.5.3 File Based Write Filter (FBWF).............................................................................................. 73
5.5.4 Buffer memory NVRAM ......................................................................................................... 74
5.5.5 Active Management Technology (AMT) ................................................................................ 75
5.5.6 Trusted Platform Modul (TPM)............................................................................................... 77
6 Expanding the device and assigning device parameters ......................................................................... 79
6.1 Opening the device ................................................................................................................ 79
6.1.1 Opening the built-in unit......................................................................................................... 79
6.2 Installing and removing a memory module ............................................................................ 81
6.3 Installing and removing a PCIe card (built-in units with PCIe card)....................................... 83
6.4 Installing and removing a CFast card .................................................................................... 85
6.4.1 Installing and removing a CFast card (external slot) ............................................................. 85
6.5 Assigning CPU power consumption parameters ................................................................... 86
7 Maintaining and servicing your device ..................................................................................................... 87
7.1 Maintenance........................................................................................................................... 87
7.2 Repair information.................................................................................................................. 87
7.3 Cleaning the Device Front ..................................................................................................... 90
7.4 Installing and removing hardware.......................................................................................... 91
7.4.1 Built-in unit ............................................................................................................................. 91
7.4.1.1 Replacing back-up battery (devices with 15", 19" or 22" display).......................................... 91
7.4.1.2 Replacing the SSD (devices with 15", 19" or 22" display)..................................................... 93
7.4.1.3 Replacing HDD ...................................................................................................................... 95

Table of contents
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 7
7.5 Installing the software .............................................................................................................97
7.5.1 Reinstalling the operating system...........................................................................................97
7.5.1.1 General installation procedure................................................................................................97
7.5.1.2 Restoring the delivery state ....................................................................................................98
7.5.1.3 Windows 7 ..............................................................................................................................99
7.5.1.4 Windows Embedded Standard 7 ..........................................................................................103
7.5.2 Partitioning data media .........................................................................................................105
7.5.2.1 Partitioning in Windows Embedded Standard 7 ...................................................................105
7.5.2.2 Partitioning in Windows 7 Ultimate .......................................................................................106
7.5.2.3 Adapting partitions in Windows 7 Ultimate and Windows Embedded Standard 7 ...............106
7.5.3 Installing drivers and software ..............................................................................................108
7.5.4 Update installation ................................................................................................................109
7.5.4.1 Updating the operating system.............................................................................................109
7.5.4.2 Installing or updating application programs and drivers .......................................................109
7.5.5 Backing up data ....................................................................................................................109
7.6 Recycling and disposal .........................................................................................................109
8 Technical information............................................................................................................................. 111
8.1 Certificates and approvals ....................................................................................................111
8.2 Directives and declarations...................................................................................................113
8.2.1 Electromagnetic compatibility ...............................................................................................113
8.2.2 ESD guideline .......................................................................................................................114
8.3 Dimension drawings..............................................................................................................117
8.3.1 Dimension drawing of 15" device with capacitive multi-touch screen ..................................117
8.3.2 Dimension drawing of 19" device with capacitive multi-touch screen ..................................119
8.3.3 Dimension drawing of 22" device with capacitive multi-touch screen ..................................121
8.3.4 Dimension drawing of 15" device with resistive single-touch screen ...................................123
8.3.5 Dimension drawing of 19" device with resistive single-touch screen ...................................125
8.3.6 Dimension drawing of 22" device with resistive single-touch screen ...................................127
8.4 Technical specifications........................................................................................................129
8.4.1 Built-in unit ............................................................................................................................129
8.4.1.1 General technical specifications ...........................................................................................129
8.4.1.2 Environmental conditions......................................................................................................133
8.4.2 Power requirements of the components...............................................................................135
8.4.3 Integrated DC power supply .................................................................................................135
8.4.4 AC voltage supply.................................................................................................................136
8.5 Hardware descriptions ..........................................................................................................137
8.5.1 External ports........................................................................................................................137
8.5.1.1 Serial interface......................................................................................................................137
8.5.1.2 CFast ....................................................................................................................................138
8.5.1.3 DisplayPort............................................................................................................................139
8.5.1.4 Ethernet ................................................................................................................................140
8.5.1.5 USB 3.0 port .........................................................................................................................140
8.5.1.6 USB 2.0.................................................................................................................................141
8.5.2 Internal ports.........................................................................................................................142
8.5.2.1 PCIe card ..............................................................................................................................142
8.5.3 System resources .................................................................................................................144
8.5.3.1 Currently allocated system resources...................................................................................144
8.5.3.2 Assignment of system resources..........................................................................................144

Table of contents
SIMATIC IPC477E
8Operating Instructions, 12/2016, A5E37455003-AB
8.5.4 I/O Address Areas................................................................................................................ 146
8.5.4.1 Overview of the internal module registers ........................................................................... 146
8.5.4.2 Watchdog trigger register (read only, address 066h) .......................................................... 146
8.5.4.3 Watchdog enable register / 066h select register (read/write, address 062h) ...................... 146
8.5.4.4 Battery status register (read-only, address 50Ch)............................................................... 147
8.5.4.5 NVRAM address register ..................................................................................................... 147
8.6 BIOS description .................................................................................................................. 148
8.6.1 Overview .............................................................................................................................. 148
8.6.2 Opening the BIOS selection menu....................................................................................... 149
8.6.3 Structure of the BIOS Setup menu ...................................................................................... 151
8.6.4 Exit menu ............................................................................................................................. 153
8.6.5 BIOS update......................................................................................................................... 154
8.6.6 Alarm, error and system messages ..................................................................................... 155
8.7 Active Management Technology (AMT) .............................................................................. 156
8.7.1 Introduction .......................................................................................................................... 156
8.7.2 Overview of AMT.................................................................................................................. 157
8.7.3 Enabling Intel® AMT / basic configuration........................................................................... 157
8.7.4 Resetting the Intel® AMT to the default settings and disabling AMT .................................. 159
8.7.5 Determining the network address ........................................................................................ 159
8.7.6 Forcing user consent ........................................................................................................... 160
8.8 Functional scope in Windows .............................................................................................. 160
8.8.1 Windows Embedded Standard 7 ......................................................................................... 160
A Technical support .................................................................................................................................. 163
A.1 Service and support............................................................................................................. 163
A.2 Problem solving.................................................................................................................... 164
A.3 Notes on the use of third-party modules.............................................................................. 165
B Markings and symbols ........................................................................................................................... 167
B.1 Overview .............................................................................................................................. 167
B.2 Safety ................................................................................................................................... 167
B.3 Operator controls ................................................................................................................. 167
B.4 Certificates, approvals and markings................................................................................... 168
B.5 Interfaces ............................................................................................................................. 168
C List of abbreviations............................................................................................................................... 171
Glossary ................................................................................................................................................ 177
Index...................................................................................................................................................... 185

SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 9
Overview
1
1.1
Product description
Figure 1-1 Built-in unit with resistive single touch screen

Overview
1.1 Product description
SIMATIC IPC477E
10 Operating Instructions, 12/2016, A5E37455003-AB
Figure 1-2 Built-in unit with capacitive multi-touch screen
Features
The SIMATIC IPC477E provides high-level industrial functionality.
●Compact design
●Maintenance-free operation
●Rugged
Device variants
The delivery note contains information on the precise scope of functions and product
package for your device.
The SIMATIC IPC477E is available in the following device variants, which differ in regard to
the display size, operating method and optional expansions:
Devices with resistive single touch screen
●Display:
–15'' display, resolution: 1280 x 800 pixels
–19'' display, resolution: 1366 x 768 pixels
–22'' display, resolution: 1920 x 1080 pixels
●with PCIe slot

Overview
1.1 Product description
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 11
Built-in units with capacitive multi-touch screen
●Display:
–15.6" display, resolution: 1366 x 768 pixels
–19" display, resolution: 1366 x 768 pixels
–22'' display, resolution: 1920 x 1080 pixels
●With PCIe slot

Overview
1.2 Design of the built-in units
SIMATIC IPC477E
12 Operating Instructions, 12/2016, A5E37455003-AB
1.2
Design of the built-in units
1.2.1
Devices with resistive single touch screen
Front and side views
①
Recesses, each of which for a mounting clip
②
Display with touch screen
③
USB socket
Bottom view
The bottom view shows a device with 24 V DC power supply.
①
Recesses for one mounting clip each
Rear view
①
Rating plate
②
Rear panel / rear panel of expansion
③
Labeling for the interface arrangement

Overview
1.2 Design of the built-in units
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 13
1.2.2
Devices with capacitive multi-touch screen
The following figures show the 19" device without PCIe card as an example.
Front and side views
①
Recesses, each of which for a mounting clip
②
Display with touch screen
Bottom view
①
Recesses for one mounting clip each
Rear view
①
Rating plate
②
Rear panel
③
Labeling for the interfaces

Overview
1.2 Design of the built-in units
SIMATIC IPC477E
14 Operating Instructions, 12/2016, A5E37455003-AB
1.2.3
Devices with expansions
1.2.3.1
Devices with PCIe card
The following figures show the 15" device with resistive single-touch screen and a PCIe
expansion as an example.
Rear view and side view
①
Rear panel
②
PCIe card
Bottom view

Overview
1.2 Design of the built-in units
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 15
1.2.4
Interfaces and operator controls for devices with 24 V DC power supply
①
On/Off switch
②
24 V DC power supply
③
Protective conductor connection
④
Slot for external CFast card
With cover
⑤
4 x USB port
USB 3.0 high speed/high current
⑥
Display port
⑦
Display port
⑧
3 × Ethernet port
3 x RJ45 (10/100/1000 Mbps)
⑨
COM1 port (optional)
Serial interface, 9-pin D-Sub pin
⑩
COM2 port (optional)
Serial interface, 9-pin D-Sub pin
1.2.5
Interfaces and operator controls for devices with 100-240 V AC power supply
①
On/Off switch
②
100-240 V AC power supply
③
Protective conductor connection
④
Slot for external CFast card
With cover
⑤
4 x USB port
USB 3.0 high speed/high current
⑥
Display port
⑦
Display port
⑧
3 × Ethernet port
3 x RJ45 (10/100/1000 Mbps)
⑨
COM1 port (optional)
Serial interface, 9-pin D-Sub pin
⑩
COM2 port (optional)
Serial interface, 9-pin D-Sub pin

Overview
1.3 Accessory kit
SIMATIC IPC477E
16 Operating Instructions, 12/2016, A5E37455003-AB
1.3
Accessory kit
Built-in unit
The accessory kit contains:
●Connection terminal for connection of power supply
●Mounting clips for mounting the HMI device
Additional documents may be enclosed with the accessory kit.
1.4
Accessories
Accessories are available for your device. These are not included in the product package.
You can find Information on available accessories on the Internet at:
Industry Mall (https://mall.industry.siemens.com)
Expansion components and accessories (http://www.automation.siemens.com/mcms/pc-
based-automation/en/industrial-pc/expansion_components_accessories)
SIMATIC IPC CFast cards
●2 GB optional or
●4 GB optional or
●8 GB optional or
●16 GB optional or
●30 GB optional
Memory modules
●SO-DIMM module 4096 MB DDR4-SDRAM
●SO-DIMM module 8192 MB DDR4-SDRAM
●SO-DIMM module 16384 MB DDR4-SDRAM
●SO-DIMM module 8192 MB DDR4-SDRAM ECC
●SO-DIMM module 16384 MB DDR4-SDRAM ECC

Overview
1.4 Accessories
SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 17
Other accessories
●Touch stylus only for devices with resistive single-touch screen
●Mounting bracket
If there are higher requirements for the front seal, fasten the device with mounting
brackets in a control cabinet.

Overview
1.4 Accessories
SIMATIC IPC477E
18 Operating Instructions, 12/2016, A5E37455003-AB

SIMATIC IPC477E
Operating Instructions, 12/2016, A5E37455003-AB 19
Safety instructions
2
2.1
General safety instructions
WARNING
Life-threatening voltages are present with an open control cabinet
When you install the device in a control cabinet, some areas or components in the open
control cabinet may be carrying life-threatening voltages.
If you touch these areas or components, you may be killed by electric shock.
Switch off the power supply to the cabinet before opening it.
System expansions
NOTICE
Damage through system expansions
Device and system expansions may be faulty and can affect the entire machine or plant.
The installation of expansions can damage the device, machine or plant. Device and
system expansions may violate safety rules and regulations regarding radio interference
suppression. If you install or exchange system expansions and damage your device, the
warranty becomes void.
Note the following for system expansions:
•Only install system expansion devices designed for this device. Contact your technical
support team or where you purchased your PC to find out which system expansion
devices may safely be installed.
•Read the information on electromagnetic compatibility (Page 113).
NOTICE
"Open Type" UL508
Note that the built-in unit is classified as "Open Type" for use in the area of Industrial
Control Equipment (UL508). The installation of the built-in unit in an enclosure conforming
to UL508 is a mandatory requirement for approval and operation in accordance with UL508.

Safety instructions
2.1 General safety instructions
SIMATIC IPC477E
20 Operating Instructions, 12/2016, A5E37455003-AB
Battery and rechargeable battery
WARNING
Risk of explosion and release of harmful substances
Improper handling of lithium batteries can result in an explosion of the batteries.
Explosion of the batteries and the released pollutants can cause severe physical injury.
Worn batteries jeopardize the function of the device.
Note the following when handling lithium batteries:
•Replace spent batteries promptly. You can find information on installing and removing
the backup battery in the Operating Instructions.
•Replace the lithium battery only with an identical battery or types recommended by the
manufacturer.
•Do not throw lithium batteries into fire, do not solder on the cell body, do not recharge,
do not open, do not short-circuit, do not reverse polarity, do not heat above 100°C and
protect from direct sunlight, moisture and condensation.
Strong high-frequency radiation
NOTICE
Observe immunity to RF radiation
The device has an increased immunity to RF radiation according to the specifications on
electromagnetic compatibility in the technical specifications.
Radiation exposure in excess of the specified immunity limits can impair device functions,
result in malfunctions and therefore injuries or damages.
Read the information on immunity to RF radiation in the technical specifications.
ESD Guideline
Electrostatic sensitive devices can be labeled with an appropriate symbol.
NOTICE
Electrostatic sensitive devices (ESD)
When you touch electrostatic sensitive components, you can destroy them through voltages
that are far below the human perception threshold.
If you work with components that can be destroyed by electrostatic discharge, observe the
ESD Guideline (Page 114).