Siemens SL42 User manual
Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2001
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
http://www.my-siemens.com
Ref.No.: A31008-H4810-A1-1-7619
*A5B00025601804*
s
User Guide
SL
42
BA_sl42_english 20.06.2001 16:43 Uhr Seite 1
All manuals and user guides at all-guides.com
all-guides.com
20.7.01 u35vgb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
Thank you for purchasing your new
Siemens mobile phone. We hope
you'll find it very useful and enjoya-
ble.
Please take a little time to read the
operating instructions. It will stand
you in good stead when you come
to use the phone. In particular,
please observe the safety (p. 3) and
PIN/Security precautions (p. 11).
Please also take note of the follow-
ing:
• Phone
• Battery
• MultiMediaCard™
• Power supply unit
• Operating instructions
The Sync Station (p. 8) is not includ-
ed in the scope of supply.
Please therefore connect the charg-
ing cable from the power supply unit
directly in the socket at the bottom
of the phone and connect the power
supply unit to the mains supply.
Squeeze the sides of the connector
to remove the charging cable from
the phone.
You will need the appropriate acces-
sories to exchange data between
the phone and a PC:
• Sync Station or data cable
• Headset (for MP3-Player)
• Software
Data exchange applications and the
functions of the MP3-Player are de-
scribed in the operating instructions.
You can obtain accessories from
your dealer or from our online shop
at:
Original Siemens
accessories
U2
(Rückseite der vorderen Umschlagseite) U2
All manuals and user guides at all-guides.com
20.7.01 u35gbivz.fm U35 /SL45- English, A31008-H4800-A2-3-7619
The User Guide........................ 5
Menu Control........................... 5
Help System ............................ 6
!" #
$%&' ()
Security................................... 11
*$ (+
Dialling with digit keys............ 12
End call ................................... 12
When number is busy ............ 13
Redial previous numbers ........ 13
Accept call .............................. 14
Reject call ............................... 14
During a call ............................ 15
Send DTMF tones .................. 17
,- (
New entry............................... 18
Read entry .............................. 19
Search entry ........................... 20
Call entry................................. 20
SIM location............................ 21
Store control code ................. 22
. +
Voicedialling............................ 24
Voice command...................... 24
&& ................................ 25
Play......................................... 25
Load music ............................. 27
/$ +
Record .................................... 28
Play ......................................... 29
,0* )
! (
New appointment ................... 32
!!!
12,&3
Settings................................... 34
Internet access ....................... 34
Profiles.................................... 36
0!$0
Chronometer........................... 38
*13 #
Read Messages ...................... 39
Compose message................. 40
Text entry with “T9”............... 41
Incoming list, outgoing list ...... 43
Archive.................................... 43
Predef. message..................... 44
Setup ...................................... 45
.0*0-4 5
Setup ...................................... 46
Listen to.................................. 46
!-
6 #
Calls missed............................ 49
Calls received.......................... 49
Calls dialled ............................. 49
Alarms missed ........................ 49
& )
Activate................................... 50
Without Alarm......................... 51
1
1
All manuals and user guides at all-guides.com
20.7.01 u35gbivz.fm U35 /SL45- English,A31008-H4800-A2-3-7619
, +
Ringer setting ........................ 52
Volume .................................. 52
Silent alert............................... 53
Filter........................................ 53
Service tones ......................... 53
70!$*
/
Menu mode ............................ 57
Device..................................... 57
Security................................... 60
Network.................................. 61
During calls ............................. 64
Headset ................................. 64
Car use ................................... 64
IrDA ........................................ 64
8 5
Soft key .................................. 65
Speed dialling number ............ 66
Quick menu selection............. 66
!9:4 5
840*&! 5
Fax/data .................................. 68
Speech/fax.............................. 68
/4$* 5#
Sync Station............................ 69
IrDA (Infrared) ......................... 69
Integral modem ...................... 69
&! )
Data Exchange Software ........ 70
Siemens QuickSync................ 71
/0- +
0
7-$*
0
Declaration of conformity........ 77
Technical data ......................... 77
Maintenance tips .................... 77
!, #
4 (
2
2
All manuals and user guides at all-guides.com
20.7.01 u35sec.fm U35 /SL45- English, A31008-H4800-A2-3-7619
All radio transmitters are subject to
restrictions such as:
Switch off in hospitals; medical
equipment such as pacemakers
and hearing aids may be
affected.
While driving:
Do not hold the phone in your
hand. Only use one earpiece of
the stereo headphones
("Car Accessories", page 79).
Mobile phones must be
switched off at all times in an
aircraft.
Prevent accidential activation.
Switch off near petrol stations,
fuel depots, chemical plants or
blasting operations.
TVs, radios, PCs, and so on may
be affected by interference.
Do not use magnifying glasses
or the like to view the infrared
port during operation [Class
1LED product (classified accord-
ing to IEC 60825-1)].
The ring tone is reproduced
through the earpiece. First
accept the call, then hold the
phone to your ear.
Caution: The MultiMediaCard
and SIM card can be removed;
small parts could be swallowed
by children.
Please note:
Neither the phone nor the bat-
tery should be opened under
any circumstances.
No modifications may be made
to the phone. Any such modifi-
cations will invalidate its ap-
proval for use.
We recommend you use only
original Siemens batteries and
charging devices. Otherwise
you risk damaging your health
and the product.
The battery cover must not be
removed from the battery.
Dispose of used batteries ac-
cording to statutory require-
ments.
We recommend you use only
original Siemens accessories to
avoid possible damage and en-
sure that the phone complies
with all the relevant regulations.
Improper use will invalidate the warranty.
All manuals and user guides at all-guides.com
20.7.01 u35over.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(IrDA, e.g. for PC/
PDA communication)
Reception strength/
battery level
(see also p. 72).
To switch on and off:
Hold .
Confirm
(switching
off only).
Activate dictaphone.
(context-sensitive)
Hold : Start
voice dialling.
:Set volume/
scroll up and down in
menus and messages.
Activate MP3 player.
!
To switch on and off:
Hold .
The current functions
are displayed as icons
or text above the keys.
The soft keys display
the “quick selection”
and menu access in
standby mode or offer
access to a special
service such as
the SIM service.
"# $%
Select displayed phone number
or name, accept calls.
Display last calls in standby
mode.
&&"
' End call or jump back to
the previous menu level.
( Switch phone on/off
or return to standby mode.
Hold: Voice dialling
Open Addressbook.
Open menu.
%
Scroll up and down.
Select function.
Menu level back.
$
Move cursor.
Scroll up and down.
7*
,QWHUQHW 03:
All manuals and user guides at all-guides.com
all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
The short guide will suffice for
experienced users and those in a
hurry.
We recommend you read this User
Guide carefully, so that you can use
all the functions of the phone fully.
The following symbols are used:
Enter numbers or letters.
On/Off/End key.
Call key.
Press control key on the
side indicated.
Displays a soft key
function.
Function depends on the
Service Provider; special
registration may be necessary.
Steps for menu access (e. g.):
Î% Î)%
The procedure above corresponds to:
Press soft key.
Scroll to %.
Select %.
Scroll to )%.
Select)%.
The menus provide access to
functions, network services and
individual settings.
$%
You always reach it from the
standby mode when you press the
right soft key:
or with
$%
Use the control key to
scroll in the menus.
Select a submenu or a
function.
Go back one menu level
(or press ).
&%
In other situations (e.g. when
Addressbook is open), a
corresponding option menu
appears:
Press.
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
5
!
In every menu, you will find the help
line at the top which gives you
access to the helpsystem by
subject. Calling up the help for the
first time after switching on can take
a few seconds, as the WAP
Browser is used to display the help.
No Internet connection is
established however.
Leave the helpsystem.
You return to the point at
which you called up the
helpsystem.
Go to the main menu of
the helpsystem.
Follow the highlighted link
and jump to this topic in
the helpsystem.
Press briefly: Go back to
the previous topic in the
helpsystem.
Hold down: End help and
return to standby mode.
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
""
The Service Provider supplies you
with a SIM card on which all the
important data for your line is
stored.
If the SIM card has been delivered in
credit card size, snap the smaller
segment out and remove any rough
edges.
•Insert SIM card under the retain-
ing ribsn. Make sure the angled
corner is in the correct position,
gold contacts pointing downward.
•Press SIM card downward oun-
til the latch engages.
•Then insert the battery (see p. 8).
Only 3 Volt SIM cards are supported. Older
SIM cards (5 Volt technology) cannot be
used. Please contact your Service Provider.
o
n
#!$"
•Switch off phone.
•Unlock and remove battery.
•Press latch inward puntil the
SIM card jumps out a short way.
•Remove the SIM card.
*%%$
If the phone is switched on without
the SIM card, the following appears:
Press soft key.
All the functions that can be used
without the SIM card are shown.
You will find a description of these
functions in this User Guide.
"Emergency number
(SOS)", p. 11.
pLatch
& $%
q
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
"
•Insert battery at the bottom of the
phone nand press inward until it
clicks into place o.
•Switch off the phone before you
remove the battery.
•Unlock battery
o
, then remove
n
.
•The battery is not fully charged
when delivered, so:
•Interconnect the socket and the
Sync Stationnwith the plug-in
power supply.
•Insert the phone into the Sync
Stationoand press downward
until it engages. The contact mes-
sage is displayed (alternatively:
plug in power supply directly to
the phone).
n
o
o
n
The voltage indicated on the
Sync Station must not be
exceeded.
!!
The charger heats up when used for long
periods. This is normal and not dangerous.
When charging is in progress.
End of charging
An empty battery is fully charged after
about 2 hours. Charging is only possible in
an ambient temperature of 5°C to 40°C
(the charge icon flashes as a warning when
the temperature is 5°C above/below).
+!
A fully charged battery provides 60 to 170
hours of standby time or 1½ to 4 hours of
talk time. The standby times/talk times are
average values; the actual values depend
on the operating conditions (see table
below).
Charge level display:
Fully Empty
charged
A beep sounds when the battery is nearly
empty.
Operation
carried out
Time
(min)
Decrease of
standby time
Calling 1 30 - 60 min.
Playing music 30 20 - 30 h.
Display
backlight*
½30min.
Network search 1 5 - 10 min.
*Key input, games, organizer etc.
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
#
With the MultiMediaCard™, your
phone acquires a very large memory.
It enables you to store numerous
addresses, MP3 music files or voice
memos. You may also use the
MultiMediaCard™like a floppy-disk
to save any other desired files.
%
•The MultiMediaCard™is already
in the phone when it is shipped
from the factory.
•Push open the small button oppo-
site n(using a pen for example).
Remove the MultiMediaCard™
carrier from the phone o.
•Insert the MultiMediaCard™into
the carrierp.
n
o
p
•Slide the carrier with the Multi-
MediaCard™into the phone again
o.
&!!
The Card-Explorer is available in the
phone for organising your files (see
p. 67). In combination with a PC, you
can also use the Data Exchange
Software (see p. 70).
Note that the entries on the
MultiMediaCard™are not
automatically linked with the entries
on the SIM card. For example,
entries that you make in the
Addressbook are only stored on the
MultiMediaCard™.
Please, treat the MultiMediaCard™
carefully. Do not bend it or expose it to
static electricity.
New MultiMediaCard™
1. Save the data of your old
MultiMediaCard™on a PC using the
Data Exchange Software .
Save your Addressbook entries with the
Siemens QuickSync Software.
2. Format the new MultiMediaCard™using
the Data Exchange Software.
3. Copy the data from the PC to the
new MultiMediaCard™using the Data
Exchange Software. Copy the
Addressbook entries with Siemens
QuickSync.
All manuals and user guides at all-guides.com
all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
() !
Hold On/Off/End keyto switch
on or off.
"'
The SIM card can be protected with
a 4-8 digit PIN code.
•Enter your PIN code using the
digit keys (shown as a series of
asterisks,if you make a mistake
press ).
•Confirm input.
Press the soft key (see diagram).
When you switch the phone on for the first
time the language of your Service Provider
is loaded for the display prompt (see also
p. 57). This takes a few seconds.
'
%',
----
&
Logging on to the network will take
a few seconds.
When the name of the Service
Provider appears in the display,
the phone and
%.
When you switch on the phone for the first
time the Phonebook entries are copied from
the SIM card to the Addressbook. Please do
not interrupt this process and reject all
incoming calls.
$
Whenever you change a SIM card you are
prompted to copy the names and phone
numbers stored there to the
MultiMediaCard™after you have switched
on the phone. Follow the instructions on the
display.
If you want to copy the data of the SIM Card
to the MultiMediaCard™later on, you can
use the functions in the SIM memory menu
(see p. 21).
'$
If “'%$.“is
displayed, check for faults, see p. 75.
/!',#
If the PIN is entered incorrectly three times,
the SIM card is barred, see p. 75.
Activate/Deactivate PIN control,
Change PIN No., see p. 61.
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
((
!
The phone and SIM card are
protected against misuse by several
security codes and should be
treated with the same care as a
cheque guarantee card.
For further details see also p. 60 and
p. 61.
"!%0&1
By pressing the soft key you can
make an emergency call on any network
without a SIM card and without entering a
PIN . This must only be used in real
emergencies.
,
Strength of the incoming signal.
A weak signal reduces the call
quality and may lead to loss of
connection. In this case, change
your location.
Do not interfere with the antenna at the top
of the phone unnecessarily during
operation, otherwise the quality of the
connection may be impaired.
If you are outside your “home network“,
your phone automatically selects another
GSM network (see also p. 61).
$
This symbol is displayed if your
SIM card supports special
applications such as banking.
',2 Protects your SIM card (per-
sonal identification number).
Î% Î
% Î
then select a function:
',2
You can change the PIN to any
4 - 8 digit number (i.e . a number you
may find easier to remember).
Enter PIN.
Press.
/ Enter PIN.
/ Repeat PIN.
',3
You can change the PIN 2 to any 4-8
digit number (displayed only if PIN2
is available).
Proceed as with ',2.
'
You can also change the phone code
to any 4 - 8 digit number. Proceed as
with ',2.
',3 This is needed to set the
charge detail display and to
access additional functions
on special SIM cards.
'+ Key code. Used to unlock
SIM cards after the wrong
PIN has been entered.
'
Protects your phone. Must
be entered at the first securi-
ty setting (4-8 digits)).
%
%
!4%
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(+
()
The phone must be switched on
(standby mode).
Enter thenumber
- if necessary with interna-
tional dialling code
- national only for calls to
the national fixed network.
A short press clears
the last digit, a long press
clears the entire number.
Store phone number
in the Addressbook, see
p. 18.
Press the Call key. The
phone number displayed
is dialled.
Press the End key. The call
is ended.
Press this key even if the person on
the other end of the line has hung up
first.
!
You can access international dialling codes
stored in your phone:
Press the key until a “+“symbol
appears.
Press.
Select the required country from the list.
The international dialling code is displayed.
Now add the national number (in many
countries without the first digit if it is a zero)
and press the Call key.
Plug in the stereo headphones at the
bottom of the phone. With the PTT key you
can use the functions “answer call, end call
”and in standby mode you can use voice
dialling (see p. 24).
If there is a call, the music is automatically
interrupted. Press the PTT key on the
headset cable to accept the call (see p. 26).
Warning:
Both earpieces must never be used when
driving or operating machinery.
Microphone
PTT key
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(
*!
If the number called is busy or it
cannot be reached because of
network problems, the following
options are available:
Press. The number is
automatically dialled for up
to 15 minutes at
increasing intervals.
During this period, no
other phone number can
be dialled.
To end:
Press
end key .
Press. A beep reminds
you to redial the phone
number after 15 minutes.
Any other call ends the function.
#$!
To redial the phone number
called:
Press the Call key
.
To redial other numbers that were
dialled previously:
Press the Call key once.
Pick out the required
phone number from the
list of last calls, then
press...
... to dial.
You can add a phone number
to the Addressbook or edit an
entry or delete it.
Calling other stored phone numbers,
see p. 49.
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(
+
The phone must be switched on to
receive calls (in standby mode).
or, if call divert is set:
accept a call with:
or with
divert the call.
Press.
#,
The caller hears the busy signal.
Diverts, say, to the mailbox, if
this diversion has been set, see
p. 55.
567872396:
;
!
If a call comes in, the music is automatically
interrupted. Press the PTT key to accept the
call or to end the call (see p. 26).
!!
You must have recorded and activated an
Answer.message.
When a call comes in, press the dictation
key . The call is accepted and an
Answer.message is played without your
having to speak (see also p. 30).
The numbers of calls that have been
received and missed are stored for call
backpurposes, see p. 49.
You can also press any key to accept a call,
for the setting, see "Any key answer", p. 57.
An incoming call will interrupt any other use
of the phone.
For data calls and fax calls see p. 68.
For functions during the call
see p. 15.
Switch off the ringer for the current call:
Hold down.
The call is displayed. The caller
hears the dialling tone.
All manuals and user guides at all-guides.com
all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(
(
During a call you may be advised
that there is another call waiting.
You will hear a special tone during
the call. Now, you have the
following options:
Accept the waiting call and
place the current call on
hold.
To swap between the two
calls, press each
time.
Reject the waiting call. The
caller will hear the busy
tone.
or
If this is set, the caller will
be diverted to the mailbox
for example (see p. 55).
!
End the current call.
Accept the new call.
You may need to register for this service
with your Service Provider and set your
phone accordingly (see p. 64).
You can adjust
the handset
volume with
the keys on
the phone.
If a car kit is used, its volume setting
does not affect the usual setting on
the phone.
"
You can play back a recording (the
person on the other end of the line
also hears it) or record the call, see
p. 28.
You can key in a number during a
call. The person on the other end of
the line can hear the number
entered. It can be stored or
contacted after the current call has
ended.
Follow the instructions on the
display.
High
Low
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(5
#
You can call another number during
a call.
You can swap back and forth
between both calls or link all callers
together in a conference.
During a call, inform your partner
about your intention then:
! Put the current call on
hold.
Now you can dial a new number.
When the connection is established,
you have the following options:
Swap back and forth
between the two calls.
Some functions may not be supported by
your Service Provider.
( %
Open call menu and select
.
A held call is added (conference call
with up to five subscribers).
To end:
All calls are ended
simultaneously when the
End key is pressed.
Open call menu and select
.
The original call is joined to the
second call. For you, both calls are
now ended. Not supported yet by all
Service Providers.
When the current call is ended, the
following query is displayed: “Return to call
on hold?“
" Return to the held call.
# The held call is ended.
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
(
!-
$
Switch the microphone
on or off. If switched
off, the person on the
other end of the line
can hear nothing.
Alternatively:
Hold .
(see p. 16)
<! While the connection
continues, the call
duration and (if set, see
p. 54) the call time/cost
are displayed.
(see p. 16)
$% Direct access to the
main menu.
% List all held and active
calls (e.g. participants
in a conference call).
<$*
Transmit the control
codes created by the
keys or Addressbook.
(&
Digits entered during a call are
transmitted directly as DTMF
signals so that an answering
machine, for example, can be
controlled (DTMF = Dual Tone Multi
Frequency).
All manuals and user guides at all-guides.com
20.7.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
( "#
Î&! Î
or
from standby mode
You can store names, addresses
and phone numbers in the
Addressbook. The Addressbook is
only available if a MultiMediaCard™
is inserted. Without a
MultiMediaCard™you can only
access the SIM card (with restricted
functionality) (p. 21).
'
Open Addressbook (in
standby mode).
Press.
The entry card for an address is dis-
played.
=
,
>%
?
@
*
Enter the first or last name
and a phone number.
Make your entries field by
field:
•Last name:
•First name:
•Company:
•Email:
•Phone:
•Tel.office:
•Tel.mobile:
•Fax:
•Street:
•Postcode:
•City:
•Country:
•URL: (Internet address)
•VIP: (see below)
Press.
)'
You should only assign important entries to
the VIP group.
You may display the VIP entries at the top of
the Addressbook (see p. 20).
You can set your phone so that the ringer
sounds only for calls from numbers in the
VIP group (see p. 53).
A call from a VIP entry can be announced by
a special melody (see p. 54).
Copy data from a different
Addressbook entry.
All manuals and user guides at all-guides.com
Other manuals for SL42
2
Table of contents
Other Siemens Telephone manuals
Siemens
Siemens Hicom 300 E CS User manual
Siemens
Siemens Gigaset A410 User manual
Siemens
Siemens HiPath 1100 User manual
Siemens
Siemens CF62 Setup guide
Siemens
Siemens Gigaset AS185 User manual
Siemens
Siemens optiPoint 500 economy User manual
Siemens
Siemens T-View User manual
Siemens
Siemens OpenScape Voice OpenStage 20 E SIP User manual
Siemens
Siemens HiPath 8000 User manual
Siemens
Siemens OpenStage 15 User manual
Siemens
Siemens OPTIPOINT HIPATH 2000 User manual
Siemens
Siemens Hicom 100 E User manual
Siemens
Siemens OpenStage15 User manual
Siemens
Siemens 300Series User manual
Siemens
Siemens Gigaset 5030 User manual
Siemens
Siemens HIPATH 2000 User manual
Siemens
Siemens HiPath500 User manual
Siemens
Siemens GIGASET AL140 TRIO User manual
Siemens
Siemens Euroset 5005 User manual
Siemens
Siemens HiPath 500 User manual
