SignaMax 065-7404GATB User manual

Hardened 4-Port 10/100/1000M
DIN-Rail Mount Switch
065-7404GATB
User's Manual
(V1.0 Version)
1

Overview
The Signamax 065-7404GATB industrial Ethernet switches are entry-level
industrial 4-port Ethernet switches that provide an economical solution for
your industrial Ethernet connection, support IEEE802.3/802.3u/802.3x.
Dustproof and full close structure and the IP40 case with LED indicators
make the plug-and-play 065-7404GATB switches easy to use and reliable.
These switches have been designed for harsh industrial environments.
065-7404GATB supports 4 ports 10/100/1000Base-T(X), Full/Half duplex
mode, and auto MDI/MDI-X connection.
The 065-7404GATB has a wide operating temperature range of -40 to
185°F (-40 to 85°C), and are designed to withstand a high degree of
vibration and shock. The rugged hardware design makes either model
perfect for ensuring that your Ethernet equipment can withstand critical
industrial applications.
Package Checklist
Signamax’s 065-7404GATB is shipped with the following items. If any of
these items is missing or damaged, please contact your customer service
representative for assistance.
065-7404GATB Switch x 1
User's Manual (CD format) x 1
Features
IEEE802.3/ 802.3u/ 802.3x
Support auto negotiation speed, F/H duplex mode, and auto send data
control
Plug-and-play, auto MDI/MDI-X connection
Store and Forward 1000M
Switching process type
Broadcast storm protection
Network work state LED indicator
12～36VDC power input
Operating temperature ranges from -40 to 185°F (-40 to 85°C)
Industry standard design, dustproof and close design IP40, rugged
high-strength metal case

Panel Layout
Mounting Dimensions
1. Power input PWR1 LED
2
. Power input PWR2 LED
3
. 10/100/1000BaseT(X) Port-G1
4.
10/100/1000BaseT(X) Port-G2
5.
10/100/1000BaseT(X) Port-G3
6.
10/100/1000BaseT(X) Port-G4
Front Panel View
Top Panel View
2
3

DIN-Rail Mounting
The aluminum DIN-rail attachment plate should already be fixed to the back
panel of the 065-7404GATB Switch when you take it out of the box. If you
need to reattach the DIN-rail attachment plate, make sure the stiff metal
spring is situated towards the top, as shown in the figures below.
To remove the switch from the DIN-rail, simply reverse Steps 1 and 2
above.
Wall Mounting (optional)
For some applications, you will find it convenient to mount the switch on the
wall, as illustrated below.
STEP 1:
Remove the aluminum DIN-rail
attachment plate from the
switch’s rear panel, and then
attach the wall mount plates,
as shown in the diagram
below.
STEP 2:
Mounting the switch on the wall requires 4 screws.
Use the switch, with wall mount plates attached,
as a guide to mark the correct locations of the 4 screws.
The heads of the screws should be less than 6.0 mm in
diameter, and the shafts should be less than 3.5 mm in
diameter, as shown in the figure at the right.
Do not screw the screws in all the way—leave about 2 mm to allow room
for sliding the wall mount panel between the wall and the screws.
STEP 2:
The DIN-rail attachment unit
will snap into place as shown
below.
STEP 1:
Insert the top of the DIN-rail
into the slot just below the stiff
metal spring.
Before tightening screws into the wall, make sure the
screw head and shank size are suitable by inserting the
screw into one of the key hole shaped apertures of the
Wall Mounting Plates.
4

STEP 3:
Once the screws are fixed in the
wall, insert the four screw heads
through the large parts of the
keyhole-shaped apertures, and
then slide the switch downwards, as
indicated. Tighten the four
screws for added stability.
Grounding the Signamax 065-7404GATB switch
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screw to the grounding surface prior to connecting devices.
Wiring the Redundant Power Inputs
The top two contacts and the bottom two contacts of the 6-contact terminal
block connector on the switch’s top panel are used for the switch’s two DC
inputs. Top and front views of one of the terminal block connectors are
shown here.
STEP 1:
Insert the negative/positive DC wires into the
V-/V+ terminals.
STEP 2:
To keep the DC wires from pulling loose, use a
small flat-blade screwdriver to tighten the
wire-clamp screws on the front of the terminal
block connector.
STEP 3:
Insert the plastic terminal block connector prongs
into the terminal block receptor, which is located
on the switch’s top panel.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface, such as a metal panel.
ATTENTION
Before connecting the Signamax 065-7404GATB switch to
the DC power inputs, make sure the DC power source
voltage is stable.
5

Communication Connections
Signamax 065-7404GATB switches have 4 10/100/1000BaseT(X) Ethernet
ports.
10/100/1000BaseT(X) Ethernet Port Connection
The 10/100/1000BaseT(X) ports located on the Signamax 065-7404GATB
switch’s front panel are used to connect to Ethernet-enabled devices.
Below we show pinouts for both MDI (NIC-type) ports and MDI-X
(HUB/Switch-type) ports, and also show cable wiring diagrams for
straight-through and cross-over Ethernet cables.
10/100/1000Base T(x) RJ45 Pinouts
MDI Port Pinouts MDI-X Port Pinouts 8-pin RJ45
RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring
RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring
6

LED Indicators
The front panel of the Signamax 065-7404GATB switch contains several
LED indicators. The function of each LED is described in the table below.
Auto MDI/MDI-X Connection
The Auto MDI/MDI-X function allows users to connect the Signamax
065-7404GATB’s 10/100/1000BaseTX ports to any kind of Ethernet
device, without needing to pay attention to the type of Ethernet cable
being used for the connection. This means that you can use either a
straight-through cable or cross-over cable to connect the Switch to
Ethernet devices.
LED
Color
State
Description
PWR1
GREEN
On
Power is being supplied to power
input PWR1
Off
Power is not being supplied to power
input PWR1
PWR2
GREEN
On
Power is being supplied to power
input PWR2
Off
Power is not being supplied to power
input PWR2
G1-G4
(TP) GREEN
On TP port’s 1000 Mbps link is active
Blinking
Data is being transmitted at1000Mbps
Off
1000BaseTX Port’s link is inactive
7

Specifications
Parameter Specifications
Interface
RJ45 Ports: 10/100/1000BaseT(X) auto
connection, Full /Half duplex or force work
mode, and support MDI/MDI-X connection
Technology
Standard
：
IEEE802.3, IEEE802.3x, IEEE802.3u
Forwarding and Filtrate Rate: 148810pps
Transmit type: Store and Forward switching
process type
Support 1K MAC Address
Power
Input Voltage: 12VDC~36VDC,
Overload Current Protection
Connection: 3 bit terminal block
Mechanical
Dimensions(L×W×H):140mm×118mm×60.5mm
Packaging: IP40 Protection,
Metal case
Environmental
Operating Temperature: -40 to 85°C
Storage Temperature: -45 to 85 °C
Ambient Relative Humidity: 5% to 95%
(non-condensing)
Approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 4
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
EN61000-4-6 (CS), Level 3
EN61000-4-8, Level 5
Shock: IEC 60068-2-27
Free Fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Warranty 5 years
8