Signature Hardware LETHE 926768 User manual

11.800.855.2284
LETHE
FREESTANDING TUB FAUCET
SKU: 926768
REVISED 02/03/2021
CODES: 402359, 402358, 402360
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are

Hardware accepts no liability for any damage to the
faucet, plumbing, sink, counter top, or for personal
injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage.
If any damage is found, contact our Customer
Relations team via live chat at www.signaturehard-
ware.com or by emailing support@siganturehard-
ware.com.
Ensure that you have gathered all the required
materials that are needed for the installation.
ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at
www.signaturehardware.com for product and
warranty information, or contact us through live
chat or by emailing support@signaturehard-
ware.com.
TOOLS AND MATERIALS:
Plumbers
Tape
Thread
Sealant
Adjustable
Wrench Level

(provided)
Drill
Pencil or
Marker

21.800.855.2284
INSTALLATION
LETHE
FREESTANDING TUB FAUCET
SKU: 926768
3. Attach the mounting bracket by threading it onto the

faucet at its desired location, then mark the location of


hole locations.
1. Attach the spout to the faucet body. Insert the spout
into the top of the faucet, then tighten the set screw

by inserting the provided screw cover.
2. Slide the decorative baseplate onto the faucet body,
as shown.
Spout
Faucet Body
Screw Cover
Faucet Body
Decorative Baseplate

31.800.855.2284
LETHE
FREESTANDING TUB FAUCET
SKU: 926768
6. Connect the braided water lines to the main water

hot and cold lines appropriately. Apply thread sealant or
plumber’s tape to the threads before attaching. Hand

wrench. Be careful not to overtighten.

there are no leaks. Once you have determined that

continue with the installation.
5. Remove the nuts, locking washers, and metal washer
from each of the mounting screws. Drop each of the
screws and anchors into the drilled pilot holes, with the


washers, locking washers, and nuts that were removed

conceal the mounting hardware and rough-in.
Threading Facing Up
ON
OFF

41.800.855.2284
LETHE
FREESTANDING TUB FAUCET
SKU: 926768
10. Once installation is complete, turn on the main
water supply. Remove the aerator from the spout and

seconds to remove any dust or loose sediment within
the water lines. Check for any leaks, and that hot and
cold water are running appropriately. Divert the water to


9. Finish your installation by attaching the hand shower
to the faucet using the hand shower hose. Hand

ON
Hand Shower
Hand Shower
Hose
Faucet