SIHOO M76 User manual

PRODUCT
INSTALLATION
GUIDE
www.sihoo.com
Model:M76
Hello buyer,
First of all, thank you for choosing the SIHOO office chair. We cherish the
opportunity for your cooperation.
We Need Your HELP!
Firstly, we will offer product warranty services. If any non-human issues
occur within one year, please feel free to contact us. It is our pleasure to
serve you.
Secondly, we are a small business and your good review and feedback are
very important to us. If you are not satisfied, please email us before leaving
your review, so that we can have an opportunity to know the defect of our
products and to compensate you. We will do our best to satisfy you.
Please feel free to contact us with the following email:
(US) [email protected]
(EU and UK) [email protected]
ご不明な点がございましたら、お気軽にお問い合わせく
だ さ い：
(JP) [email protected]
Thank you for being one of our customers. We love our customers and will
always be here if you need us.
PRODUCT SIZE：63*62*91.5(99.5)CM

Functions (The size will be according to regular practice)
1.Please use on the flat floor and one chair can only bear one person's weight;
2.To avoid using the wrong screws, please fix all the screws before tightening
them;
3.Please don't let the child sit on the chair alone if he is under 5 year-old;
4.Please don't sit on the armrest, in case cause some danger;
5.Do not stand on the chair or use it as a ladder or footsteps;
6.Please don’t put overweight on the chair, or used as trolley;
7.Don’t use sharp or hooked objects to scrape the chair and do not get it close
to the fire;
8.To avoid any harm to your fingers, don’t insert them into the mechanism
while sitting .
Pls read the
Safety
Instructions
below carefully
Installation and commissioning
1、Installation and commissioning.
2、 Check whether the parts are complete and damaged.
3、Choose a spacious and clean site when assembling. Paper is laid flat on the
ground to prevent parts from colliding with the ground during installation.
4、 Use a soft flannel to remove the dirt on the furniture surface after installation. DO NOT wipe
the furniture with a rag with gravel.
Parts list (The size will be according to regular measurements; One more as a backup)
Notice: Before installa-
tion, pls classify the
screw, measure the
screw lengh for easy
assemble
Notice: Before installation, pls classify the screw, measure the screw lengh for easy assemble
Assemble Introduction (The size will be according to regular measurements ）
Pressing the caster into the
base.
1
Insert the gaslift to the base.
2Fix the mechanism to the seat
with 4pcs (M6*20) screws
including the shim； Pay
attention to the front and
back direction.
3
4
Fix the back plate to the
seat with 4pcs(M6*35)
screws including the shim.
Put the mechanism into
the gaslift and pull down
the armrest.
5
012345678910cm
Castor:5pcs Base:1pc Mechanism:1pc Backrest:1pc
Seat cushion:1pc Gas lift:1pc Hex wrench:1pc
User Manual
Backrest screw(M6*35):4+1pcs Mechanism screw(M6*20):4+1pcs
Armrest can
be rotated
up and down
Backrest tilt tension
adjustment +Tighten
-Loosen
Rotate the handle to adjust
the heightPull out the handle
to adjust the backrest tiltPush
in handle to lock backrest tilt
Lumbar support
depth & height
adjustment
The front
The front