SIIG CE-H22Z11-S1 Product information sheet

1
04-1118A
P/N: CE-H22Z11-S1
HDMI 2.0 to DisplayPort 1.2
Converter - 4Kx2K 60Hz
User Reference Guide

2
Introduction
The HDMI 2.0 to DisplayPort 1.2 Converter easily
connects your HDMI source device to a DP monitor.
Key Features and Benefits
• Supportshighresolutionsupto3840x2160@60Hz
(4:4:4 8bit) and stereo or coaxial audio (up to
7.1ch) output
• CompliantwithDisplayPort1.2a,HDMI 2.0a and
HDCP 2.2
• Built-in EDID management switches allow for
expanded compatibility with different monitors
• Sturdy metal housing extends durability and
improves heat dissipation
Specifications
Video Bandwidth (Input) Single-link 600MHz (6.0Gbps)
Video Support Up to 4Kx2K @60Hz (4:4:4 8bit)
Audio Support Audio extraction only
HDMI Audio Format PCM2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
Connectors
1x 19-Pin, HDMI, Type A, Female, Input
1x 20-pin, DisplayPort, Female, Output
1x Coaxial, Output
1x 3.5mm Audio Jack, Output
Housing Material Metal
Power Adapter Input: AC 100-240V/ 50~60Hz
Output: DC 5V / 2A

3
Package Contents
• HDMI 2.0 to DisplayPort 1.2 Converter - 4Kx2K
60Hz
• PowerAdapter
• MountingKit
• UserReference Guide
Layout
Figure 1: Front side
• Micro USB Power Port: Connects to the included
power adapter
*Note:Also used for firmwareupdate.Connectit
to the computer by Micro USB cable (cable not
included) as needed
• Power LED: On when the unit is powered on
EDID Switches HDMI Input
Power LED
Micro USB Power Port

4
Figure 2: Rear side
• Coaxial Audio: Up to 7.1ch surround output -
connects to audio output device by coaxial cable
(cable not included)
• Audio Jack: Stereo output - connects to audio
output device by 3.5mm audio cable (cable not
included)
• DisplayPort Output: Connects to a DisplayPort
monitor/display by DisplayPort cable (cable not
included)
*Note: DisplayPort output has no audio stream
Coaxial Audio Audio Jack DisplayPort Output
• EDID Switches: Refer to the table to configure
EDID on Page 5
• HDMIInput:ConnectstoHDMIsourcedeviceby
HDMI cable (cable not included)

5
EDID Setting
There are 4 settings.
-"1": The button on the upper position
-"0": The button on the lower position
Switch Position Description
Pin 1 Pin 2
1 1 3840x2160 60Hz (Default EDID)
0 1 4096x2160 60Hz
1 0 3840x2160 30Hz
0 0 1080p 60Hz

6
Application
The HDMI 2.0 to DisplayPort 1.2 Converter allows you to
connect your HDMI source device to a DP monitor
instantly and supports high resolutions up to 4Kx2K.
Figure 3
* Note:
1. DisplayPort output has no audio stream.
2. For audio output, connect to 3.5mm audio jack (stereo) or
coaxial port (up to 7.1ch) depending on your needs.

7
Technical Support and Warranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
www.siig.com and click Support. Our online support database is updated daily with
new drivers and solutions. Answers to your questions could be just a few clicks away. You
can also submit questions online and a technical support analyst will promptly respond.
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for three (3) years from the date of purchase of the product. This warranty
is not transferable and is available only to the original purchaser of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product having
similar features and functionality) the product if defective in materials or workmanship.
This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
• Properly pack the product for shipping. All accessories that came with the
original package must be included
• Include a copy of your original sales receipt inside the package with date of
purchase and place of purchase circled and clearly visible
• Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping carton
• You are responsible for the cost of shipping to SIIG. Ship the product to the
following address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
• SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer

8
PRODUCTNAME
HDMI 2.0 to DisplayPort 1.2 Converter - 4Kx2K 60Hz
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]
About SIIG, Inc.
Foundedin 1985, SIIG,Inc. is aleading manufacturer ofIT connectivity solutions
(including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/
Oadapters) thatbridge the connection between Desktop/Notebooksystems and
external peripherals. SIIG continues to grow by adding A/V and Digital
Signage connectivity solutions to our extensive portfolio.
SIIG products offer comprehensive user manuals, many user-friendly features,
and are backed by an extensive manufacturer warranty. High quality control
standards are evident by the overall ease of installation and compatibility of
our products, as well as one of the lowest defective return rates in the industry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajor distributors, system integrators, VARs and through e-commerce
sites.
HDMI 2.0 to DisplayPort 1.2 Converter - 4Kx2K 60Hz is a trademark of SIIG, Inc. SIIG and
the SIIG logo are registered trademarks of SIIG, Inc. All other names used in this publication
are for identification only and may be trademarks of their respective owners.
January, 2018 Copyright © 2018 by SIIG, Inc. All rights reserved.