Silvercrest SPB 5200 A1 Product information sheet

IAN 273784
POWER BANK SPB 5200 A1
POWERBANK
Bedienungsanleitung und Sicherheitshinweise
POWER BANK
Operating instructions and safety instructions
POWERBANK
Instruc iuni de utilizare și indica ii de
siguran ă
ΦΟΡΗΤΟΣ ΦΟΡΤΙΣΤΗΣ
POWERBANK
Οδηγίες χρήσης και υποδείξεις ασφαλείας
PRIJENOSNA BATERIJA
Priručnik za rad i sigurnosne napomene
ВЪНШНА БАТЕРИЯ
Ръководство за потребителя и указания за
безопасност

GB/CY Operating instructions and safety instructions Page 1
HR Priručnik za rad i sigurnosne napomene Stranica 13
RO Instruc iuni de utilizare și indica ii de siguran ă Pagina 25
BG
Ръководство за потребителя и указания за безопасност Cтраница 37
GR/CY Οδηγίες χρήσης και υποδείξεις ασφαλείας Σελίδα 49
DE/AT/CH Bedienungsanleitung und Sicherheitshinweise Seite 61
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Prije nego što pročitate tekst, otvorite stranicu sa slikama i upoznajte se na
osnovu toga sa svim funkcijama uređaja.
Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate funcţiile
aparatului.
Преди да прочетете отворете страницата с фигурите и след това се
запознайте с всички функции на уреда.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειω-
θείτε με όλες τις λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.

IAN 273784
POWER BANK SPB 5200 A1
POWERBANK
Bedienungsanleitung und Sicherheitshinweise
POWER BANK
Operating instructions and safety instructions
POWERBANK
Instruc iuni de utilizare și indica ii de
siguran ă
ΦΟΡΗΤΟΣ ΦΟΡΤΙΣΤΗΣ
POWERBANK
Οδηγίες χρήσης και υποδείξεις ασφαλείας
PRIJENOSNA BATERIJA
Priručnik za rad i sigurnosne napomene
ВЪНШНА БАТЕРИЯ
Ръководство за потребителя и указания за
безопасност

GB│CY │ 1 ■
SPB 5200 A1
Contents
Introduction................................2
Information concerning these operating instructions . . . . . . 2
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Notes on trademarks . . . . . . . . . . . . . . . . . . . . . 2
Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warnings used . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic safety guidelines . . . . . . . . . . . . . . . . . . . . 3
Descriptions of components ...................5
Operation .................................5
Check the package contents . . . . . . . . . . . . . . . . . 5
Disposal of packaging materials . . . . . . . . . . . . . . . 6
Charging the Power Bank . . . . . . . . . . . . . . . . . . . 6
Checking the charge level . . . . . . . . . . . . . . . . . . . 7
Handling and operation......................7
Charging mobile devices with the Power Bank . . . . . . . . 7
Troubleshooting ............................8
Cleaning...................................9
Storage when not in use .....................9
Disposal ...................................9
Disposal of the device . . . . . . . . . . . . . . . . . . . . . 9
Appendix.................................10
Technical data. . . . . . . . . . . . . . . . . . . . . . . . 10
Notes on the Declaration of Conformity. . . . . . . . . . . 10
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Importer . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ 2 │ GB│CY SPB 5200 A1
Introduction
Information concerning these
operating instructions
Congratulations on the purchase of your new device. You
have selected a high-quality product. The operating instruc-
tions are part of this product. They contain important informa-
tion on safety, usage and disposal. Before using the product,
familiarise yourself with all operating and safety instructions.
Use the product only as described and for the specified areas
of application. Keep these operating instructions in a safe
place. Please also pass on these operating instructions to any
future owner.
Copyright
This documentation is protected by copyright. Any copying or
reproduction, including in the form of extracts, or any repro-
duction of images (even in a modified state), is permitted only
with the written authorisation of the manufacturer.
Notes on trademarks
USB®is a registered trademark of USB Implementers Forum,
Inc.
All other names and products may be trademarks or regis-
tered trademarks of their respective owners.
Intended use
This device is an information technology device and is intend-
ed exclusively for charging mobile devices that are charged
via a USB port as standard. The device is not intended for
any other purpose, nor for use beyond the scope described.
The device is not intended for use in commercial or industrial
environments. The manufacturer accepts no responsibility
for damage caused by failure to observe these instructions,
improper use or repairs, unauthorised modifications or the
use of unapproved replacement parts. The risk shall be borne
solely by the user.

GB│CY │ 3 ■
SPB 5200 A1
Warnings used
The following warning notice types are used in these operat-
ing instructions:
DANGER
A warning notice at this hazard level indicates
an imminently hazardous situation.
Failure to avoid this hazardous situation could result in
severe injuries or even death.
► Follow the instructions in this warning notice to avoid the
risk of serious injuries or death.
CAUTION!
A warning notice at this hazard level indicates a
potential for property damage.
Failure to avoid this situation could result in property
damage.
► Follow the instructions in this warning notice to prevent
property damage.
NOTE
► A note provides additional information that will assist
you in using the device.
Safety
This section contains important safety instructions for using the
device. This device complies with statutory safety regulations.
Improper use may result in personal injury and property
damage.
Basic safety guidelines
■ This device may be used by children aged 8 years and above
and by persons with limited physical, sensory or mental capa-
bilities, or lack of experience and knowledge, provided that
they are under supervision or have been told how to use the
device safely and are aware of the potential risks. Children
must not use the device as a plaything. Cleaning and user
maintenance tasks may not be carried out by children unless
they are supervised.

■ 4 │ GB│CY SPB 5200 A1
■ DANGER! Do not allow children to play with the pack-
aging material! Keep all packaging materials away from
children. Risk of suffocation!
■ Check the device for visible external damage before use. Do
not operate an device that has been damaged or dropped.
■ Always place the device on a stable and level surface. It can
be damaged if dropped.
■ Do not expose the device to direct sunlight or high tem-
peratures. Otherwise it may overheat and be irreparably
damaged.
■ Do not place the product near heat sources such as radiators
or other heat-generating devices.
■ Do not operate the device close to naked flames (e.g. candles).
■ The device is not designed for use in rooms with high temperatures
or humidity (e.g. bathrooms) or where there is excessive dust.
■ Never expose the device to extreme heat. This particularly
applies to storage in a car. Extreme temperatures can occur in
car interiors and glove compartments during long periods of
immobilisation. Remove electrical and electronic devices from
the vehicle.
■ Do not use the device immediately after moving it from a cold
room to a warm room. Always allow the device to acclimatise
before switching it on.
■ DANGER! Never open the housing of the device. There
are no user-serviceable or replaceable components inside the
device.
■ Do not make any unauthorised modifications or alterations to
the device.
■ All repairs must be carried out by authorised specialist
companies or by the Customer Service department. Improper
repairs may put the user at risk. It will also invalidate any
warranty claims.
■ Do not expose the device to water spray or dripping water,
and do not place liquid-filled objects such as vases or open
drink containers on or near the device.
■ Switch the device off immediately and disconnect any con-
nected charging cables from the device if you smell fumes or
notice any smoke. Have the device checked by a qualified
specialist before using it again.
■ If you are using a USB power supply, the mains socket used
must always be easily accessible so that the USB power
supply can be quickly disconnected from the socket in a
hazardous situation. You should also observe the operating
instructions for the USB power supply.

GB│CY │ 5 ■
SPB 5200 A1
■ DANGER! Mishandling the batteries can cause fires, ex-
plosions, leakages or other hazards! Do not throw the device
into a fire, since the integrated battery may explode.
■ Comply with all restrictions or prohibitions on use for bat-
tery-powered devices in locations with specific hazard risks,
such as petrol stations, aeroplanes, hospitals, etc.
Descriptions of components
(See fold-out page for illustrations)
Power Bank
USB plug (input: 5 V , 1 A)
ON/OFF button
Micro-USB plug (output: 5 V , 1 A)
USB port (output: 5 V , 2.1 A)
Micro-USB port (input: 5 V , 1 A)
USB port (output: 5 V , 1 A)
Charge level LEDs
Operating instructions
Cable (USB to microUSB)
Operation
Check the package contents
(See fold-out page for illustrations)
The following components are included:
▯ Power Bank SPB 5200 A1
▯ USB cable
▯ These operating instructions
♦ Remove all parts of the device from the packaging and remove
all packaging materials.
NOTE
► Check the package for completeness and for signs of
visible damage.
► If the delivery is incomplete or damage has occurred as
a result of defective packaging or during transport, con-
tact the Service hotline (see chapter entitled Service).

■ 6 │ GB│CY SPB 5200 A1
Disposal of packaging materials
The packaging protects the device from damage
during transport. The packaging materials have
been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves
raw materials and reduces the amount of waste generated.
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations.
Charging the Power Bank
Before using the Power Bank, the integrated battery must be
fully charged. The required charging time for the Power Bank
is dependent of the charging source and its output (max.
5V/1A).
CAUTION!
► Only use mains adapters with an output voltage of 5V
and an output current of at least 1A or a USB 3.0 port
on your computer to charge the Power Bank. You can
recognise the USB 3.0 port due to the blue marking.
► When charging via a USB port, ensure that at least one
further USB port remains free. This also applies when
using USB 3.0 ports.
Option A
♦ Connect the USB plug of the Power Bank to a switched-on
PC or a USB power supply (not supplied). The current charge
level is shown during charging by means of the charge level
LEDs :
LED display Charge
level
One LED is flashing < 25%
One LED is on, the second LED is flashing 25–49%
Two LEDs are on, the third LED is flashing 50–74%
Three LEDs are on, the fourth LED is flashing 75–99%
All LEDs are on 100%

GB│CY │ 7 ■
SPB 5200 A1
Option B
♦ Connect the Micro-USB cable to the Micro-USB input
on the Power Bank.
♦ Connect the other end of the Micro-USB cable to a switched-
on PC or a USB power supply (not supplied).
The current charge level is shown during charging by means
of the charge level LEDs .
CAUTION!
► Do not use both charging options simultaneously as this
could damage the Power Bank, your mains adapter or
your computer.
Checking the charge level
You can also check the charge level of the Power Bank when
it is not charged or while it is being used for charging.
♦ Press the ON/OFF button briefly. The LEDs show the
current charge level of the Power Bank for about 20 seconds.
LED display Charge
level
All LEDs are on 100%
Three LEDs are on 75–99%
Two LEDs are on 50–74%
One LED is on 20–49%
One LED is flashing < 20%
All LEDs off 0%
Handling and operation
Charging mobile devices with the
Power Bank
You can charge up to three devices at a time using the Power
Bank. When all three outputs are being used, the total charg-
ing current may not exceed 2.1 A.
♦ Connect a suitable USB charging cable to the corresponding
USB output ( or ) of the Power Bank for each device
being charged.
♦ Then connect the USB charging cable to the device to be
charged. The charging process starts automatically.