Silvercrest 90852 User manual

OIL-FILLED RADIATOR SOR 2600 A1
OIL-FILLED RADIATOR
Operating instructions
ÖLRADIATOR
Bedienungsanleitung
OLEJOVÝ RADIÁTOR
Návod k obsluze
OLEJOVÝ RADIÁTOR
Návod na obsluhu
IAN 90852

GB Operating instructions Page 1
CZ Návod k obsluze Strana 7
SK Návod na obsluhu Strana 13
DE / AT / CH Bedienungsanleitung Seite 19
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

B
A

- 1 -
Content Page
Intended Use 2
Items supplied 2
Description of the appliance 2
Technical data 2
Safety instructions 2
Assembly 3
Commissioning 4
Frost protection function 4
Fan Heater 4
Cleaning and care 5
Storage 5
Disposal 5
Warranty and Service 5
Importer 6
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 1

- 2 -
OIL-FILLED RADIATOR
Congratulations on the purchase of your new
appliance.
You have clearly decided in favour of a quality
product. These operating instructions are a part of
this product. They contain important information
in regard to safety, use and disposal. Before using
the product, familiarise yourself with all of these
operating and safety instructions. Use the product
only as described and only for the specified areas
of application. In addition, pass these documents
on, together with the product, to any future owner.
Intended Use
This appliance in intended exclusively for heating in
domestic households. It is not suitable for commercial
or industrial applications.
Items supplied
Oil-filled radiator
2 Roller rails
2 Mounting bracket
4 Wing nuts
Operating instructions
Description of the appliance
Fig. A:
1Control lamp “Power”
2Heat level switch
3Thermostat
4Warm air switch with integrated
warm air control lamp
5Warm air outlet
6Cold air intake
7Power cable retainer
Fig. B:
8Mounting bracket
9Roller rails
0Wing nuts
Technical data
Rated voltage: 220–240 V ~, 50 Hz
Heat output: 2300 - 2600 W
Heat level: I = 800 W
II = 1200 W
III = 2000 W
Thermostat: Infinitely variable
Heating gills: 9
Safety instructions
Risk of electrocution!
• Connect the oil radiator only to correctly installed
and earthed mains sockets. Ensure that the voltage
supplied through the mains socket tallies completely
with the details given on the appliance rating
plate.
• Do not fold or crush the power cable.
• To disconnect, always pull the plug itself out of
the power socket, do not pull on the power cable.
• Never touch the oil radiator, the power cable or
the plug with wet hands.
• Do not use extension cables.
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 2

- 3 -
• Under no circumstances may the appliance be
submersed in fluids or fluids be allowed to per-
meate the housing. Do not expose the appliance
to humidity and do not use it outdoors. There is
the danger of electrocution. Should liquids enter
the housing, unplug the appliance from the power
socket immediately and arrange for it to be
repaired by a qualified technician.
• Under no circumstances should the oil radiator
be used in the vicinity of water, for example in
a bath, shower, washbasin or in humid cellar
rooms. The proximity of moisture presents a danger,
even when the appliance is switched off.
• In event of operating malfunctions and before
cleaning the appliance, remove the power plug
from the wall socket.
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
• This heating appliance has been filled with a
specific volume of a special oil. Should the
appliance become damaged or leak oil then
it may no longer be taken into use. Arrange for
the appliance to be checked and/or repaired by
qualified technicians.
• Do not open the housing or attempt to repair the
appliance yourself. Should you do so, the safety
concept of the device may be compromised and
the warranty becomes void. Permit only authorised
technicians to repair a defective appliance.
• Never place the appliance in the close vicinity
of sources of heat and protect the power cable
from potential damage.
• Do not place water-filled receptacles, e.g. flower
vases, on the appliance.
Risk of fire!
• Never place the appliance close to inflammable
materials, liquids or gases. Ensure there is at
least one meter of space to all sides and above
the appliance.
• Never leave a switched-on oil radiator unsuper-
vised.
• This appliance is not intended for use by indivi-
duals (including children) with restricted physical,
physiological or intellectual abilities or deficiences
in experience and/or knowledge unless they
are supervised by a person responsible for their
safety or receive from this person instruction in
how the appliance is to be used.
• Children should be supervised to ensure that
they do not play with the appliance.
• ALWAYS position the appliance on a level and
heat resistant surface.
• Do not place open fire sources, e.g. candles,
on the appliance.
Warning: To avoid an overheating of the
oil radiator it may not be covered!
• Clean the appliance at regular intervals.
• Do not use an external timing switch or a separate
remote control system to operate the appliance.
• Do not position the appliance underneath a
mains power socket.
Injury hazard
• Lay the power cable in such a way that no one
can tread on or trip over it.
• Do not use extension cables. In an emergency
the power plug must be quickly accessible.
Assembly
Use the fold-out page of these instructions to assist
you with the assembly.
1. Take the oil radiator and all components from
the package and remove all packaging materials.
2. Place the oil radiator, with the base uppermost,
on a soft surface, for example a carpet.
3. Place a mounting bracket 8under the heater
element so that the parts with a screw thread
project upwards.
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 3

- 4 -
4. Lay a roller railer 9over it, such that the screw
threads protrude through the holes. Check to
ensure that the recesses on the roller railers 9
face outwards. The screw ends projecting from
the appliance must reach into the recesses.
5. Screw one wing nut 0onto each of the threaded
ends of the mounting bracket 8until it is hand
tight.
6. Proceed in the same manner with the other side.
7. Turn the appliance over and place it on the rollers.
Commissioning
1. Unwind all of the power cable from the power
cable retainer 7.
Note:
Ensure that the thermostat 3and the heat level
switch 2are standing at MIN resp. 0.
2. Insert the power plug into a wall power socket.
3. Place the heat level switch 2at “III” and the
thermostat 3at MAX. The control lamp “Power”
1glows.
Note:
With the heat level switch 2you can regulate how
quickly the appliance warms up. If you wish to heat
it up particularly quickly, select heat level “III”, if a
slow warming up is preferred, select heat level “I”.
Using the thermostat 3you can set it to the desired
temperature.
4. When the desired room temperature has been
reached, slowly turn the thermostat 3back until
a quiet “click” is heard and the control lamp
“Power” 1extinguishes. The momentary room
temperature will now be retained. It could be
that every now and then the control lamp
“Power” 1switches itself on and then back off.
This means that the programmed room tempera-
ture had fallen below this level for a short period
and the appliance had warmed itself back up.
Note:
If you want to heat a room up particularly quickly,
activate additionally the warm air switch 4.
When the warm air switch 4is positioned at ON,
the warm air control lamp 4glows and warm air is
blown through the warm air outlet 5into the room.
5. If you wish to switch the appliance off, first place
the warm air switch 4at the position OFF. Next,
turn the heat level switch 2to “0” and then the
thermostat 3to MIN.
6. Remove the plug from the wall power socket.
Frost protection function
You can adjust the oil-filled radiator so that it auto-
matically switches on and heats up when the room
temperature reaches about 5°C:
1. Insert the plug into a mains power socket.
2. Position the heat level switch 2at “I”, “II” or
“III”, and the thermostat 3at MIN.
The oil radiator will now switch itself on if the tempe-
rature falls to about 5°C. As soon as the room tem-
perature rises to above about 5°C, t he oil radiator
switches itself off automatically.
Fan Heater
You can use the oil radiator as a heating fan:
1. Insert the plug into a mains power socket.
2. Place the heating fan switch 4at ON.
The red heating fan indicator lamp 4lights up
and warm air will now be blown through the he-
ating fan exit 5into the room.
3. To switch the heating fan off, place the heating
fan switch 4at OFF.
The red heating fan indicator lamp 4extinguis-
hes.
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 4

- 5 -
Cleaning and care
Injury hazard
Allow the appliance to cool down before cleaning
it! Risk of Burns!
Remove the power plug from the wall socket.
There is a risk of electric shock!
Clean the appliance with a lightly moist cloth. For
stubborn soiling use a mild detergent on the cloth.
Attention!
Do not use any aggressive, abrasive or chemical
cleaning agents. These could damage the surfaces.
Storage
If you do not intend to use the appliance for a long
period, clean it as described in the section “Cleaning
and care”.
Wrap the power cable around the power cable
retainer 7.
Store the appliance at a clean and dry location.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the European guideline
2002/96/EC.
Dispose of the appliance through an approved
disposal centre or at your community waste facility.
Observe the currently applicable regulations for
waste oil disposal.
In case of doubt, please contact your waste disposal
centre.
Note:
The guidelines regarding the scrapping of the appli-
ance must be strictly followed! Enquire at your local
waste disposal facility.
Dispose of all packaging materials in an
environmentally friendly manner.
Warranty and Service
The warranty for this appliance is for 3 years from
the date of purchase. The appliance has been ma-
nufactured with care and meticulously examined
before delivery.
Please retain your receipt as proof of purchase. In the
event of a warranty claim, please make contact by
telephone with our Service Department. Only in this
way can a post-free despatch for your goods be
assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for
private use only and is not intended for commercial
use. The warranty is void in the case of abusive and
improper handling, use of force and internal tampe-
ring not carried out by our authorized service branch.
Your statutory rights are not restricted in any way by
this warranty.
The warranty period will not be extended by repairs
made under warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after un-
packing the appliance, at the latest, two days after
the purchase date. Repairs made after the expira-
tion of the warranty period are subject to payment.
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: [email protected]
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)
IAN 90852
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 5

- 6 -
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 6

- 7 -
Obsah Strana
Použití odpovídající určení 8
Rozsah dodávky 8
Popis přístroje 8
Technické údaje 8
Bezpečnost 8
Montáž 9
Uvedení do provozu 10
Funkce ochrany proti zamrzání 10
Topný ventilátor 10
Čištění a údržba 11
Úschova 11
Likvidace 11
Záruka a servis 11
Dovozce 12
IB_90852_90853_SOR2600A1_LB4.qxd 22.04.2013 16:00 Uhr Seite 7