SimpliFire VENTURE26-MA User manual

SimpliFire • VENTURE26-MA • 2040-914 • 3/14
1
VENTURE26-MA
- Assembly Instructions -
PREPARATION
Before beginning installation of the cabinet, verify that the
walls and oor in the area of the installation are clean, level
and have an electrical source. Any major deviation should be
remedied before installing the replace or cabinet.
These questions should also be considered and answered
before beginning installation of the cabinet.
a. Where are the electrical outlets?
b. Is there enough distance between windows and edge
of cabinet?
c. Is the cabinet centered between walls?
Tools and supplies needed:
• #2 Phillips Screwdriver
•Rubber Mallet
•Level
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation.
Leave this manual with party responsible for use
and operation.
CAUTION! Risk of Injury! It is recommended that two
people assemble the cabinet due to the weight and up-
right positioning of the cabinet.
NOTE:
• Theseinstructionsapplyonlytothecabinetandfacing
materialthatwillsurroundthereplace.
• Seereplacemanufacturer’sinstallationinstructionsto
ensure that all clearance and installation requirements
are met.
Model: VENTURE26-MA
SimpliFire, a brand of Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.hearthnhome.com
Please contact the SimpliFire customer/technical
support hotline at 877-320-0730 with any questions
or concerns.

SimpliFire • VENTURE26-MA • 2040-914 • 3/14 2
AB
CE
FGH
I J
A. TOP PANEL 1PC B. BOTTOM BASE 1PC
C. PARTITION 2PCS E. SIDE PANEL 2PCS
F. TOP (GLASS) 1PC G. DOOR (GLASS) 2PCS H. ADJUSTABLE
SHELF 2PCS
J. RIGHT SIDE BACK PANEL 1PCI. LEFT SIDE BACK PANEL 1PC
PARTS LIST:
D. FIREBOX SUPPORT 1PC
D

SimpliFire • VENTURE26-MA • 2040-914 • 3/14
3
HARDWARE LIST:
K. CAM BOLTS 16PCS
(Ø6x36mm)
L. CAM LOCK 16PCS
(Ø15x9mm)
M. ROUND HEAD SCREW 36PCS
(Ø3x15mm)
N. MAGNET 2PCS
O. METAL POST 8PCS
(Ø30x76mm)
P. BOLT 8PCS
(Ø5/16"x38mm)
Q. ALLEN WRENCH IPC R. PIN 8PCS
S. PLASTIC PLUG 4PCS
T. PIVOT HINGE 2PCS
U. PIVOT HINGE 2PCS
V. NON-SKID BUMPER 8PCS
(Ø15x2mm)
W. PUSH PLATE 2PCS
X. WOOD DOWEL 16PCS
(Ø8x30mm)
AA. TOUCH-UP MARKER 1PC
Z. WOOD SCREW 3PCS
(Ø4x25mm)

SimpliFire • VENTURE26-MA • 2040-914 • 3/14 4
STEP 1
B
A
K
KM
N

SimpliFire • VENTURE26-MA • 2040-914 • 3/14
5
STEP 2
STEP 3
E
C
B
C
E
X
L
LOCK
UNLOCK
A
E
C
C
E
X
L
LOCK
UNLOCK

SimpliFire • VENTURE26-MA • 2040-914 • 3/14 6
STEP 4
STEP 5
A
V
O
P Q
M
J
I

SimpliFire • VENTURE26-MA • 2040-914 • 3/14
7
STEP 6
Important Note:
• Make sure cord is free of Part
D prior to securing.
• Once rebox is secured in the
cabinet, move the cabinet to
desired location before pro-
ceeding to the next steps.
STEP 7
Z
D
Install Fireplace in cabinet
from the back of the cabinet.

SimpliFire • VENTURE26-MA • 2040-914 • 3/14 8
STEP 9
S
UW
T
S
G
G
STEP 8
F
H
H
R