Sioux Tools 5979A Specifications

Form # ZCE567A
Model 5979A
118" (3 rnm) PencilAir DieGrinder
ManufacturerISupplier
SiouxTools, Inc.
250 Snap-on Drive
P.O. Box 1596
Murphy,NC28906
Operator Instructions
Includes - Foreseen Use, Work Stations, Putting Into Service,
Operating, Dismantling,Assembly and Safety Rules.
ProductType
RPM
118" (3 mm) Pencil
Cycles Per ~m
Air Die Grinder
Important
Read these instructions carefully before installing, operating,
servicingor repairingthistool. Keeptheseinstructionsina safe
accessibleplace.
U.S.A.
Tel No. 828-835-9765 Fax No. 828-835-9685
1 5979A
Model No/Nos
I
Serial No.
Air Pressure
ProductNetWeight
0.44 Ibs
0.20 Kg
RecommendedWorking
6.2 bar
90 PSI
Maximum
6.2 bar 90 PSI
RecommendedUseOf
BalancerOr Support
NO
Test Method: Tested inaccordance with Pneurop
test code PN8NTC1 and IS0Standard 3744
RecommendedHoseBore
Size
- Minimum
5/16 ins 8 mm
SAFETY MESSAGES
Personal Safety Equipment
Use - Safety lasses YES
Use - Safety Gloves YES
Use - Safety Boots
Use
- BreathingMasks YES
Use - Ear Protectors YES
RecommendedMax.
HoseLength
30Ft 10M
A WARNING
Always Read Instructions
Before Using PowerTools
NoiseLevel: Sound Pressure Level 72.0 dB(A)
Sound Power Level 84.0 dB(A)
@ Always Wear Safety
Goggles
@ Wear Hearing Protection
Avoid Prolonged Exposure
To Vibration
Safety ruleswhen using 5979A
pencil Die Grinder
-Use accessories rated at least 70,000 RPM.
- Prolonged exposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
- Do not exceed the maximumworking air pressure.
- Use personal protection equipment as recommended.
- Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicalsknownto cause cancer,birthdefectsandother
reproductiveharm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction, remove from use
immediately and arrange for service
Vibration Level 2.0 Meters / Sec2
Test Method:
Tested inaccordance with IS0
standards8662 Parts 1
& 13
chance of coming into contact with live electricity.
- Alwayswhen using the tool, adopt afirmfooting and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Majorservicing and repairs should only be carried out
by persons trained to do so.
- Do not lock, tape, wire, etc. the 'On/Off9valve in 'On'
position.The triggerllever, etc. must always be free to
return to the 'Off'position when released.
-Always shut off the air supply to the tool and press the
'OnIOff valve to exhaust the air from the feed hose
before fitting, removing or adjusting the working
attachment fitted tothe tool.
- Beforeusing the tool, make sure that a shut off device
and repair. If it is not practical to
remove tool from service, then shut
off the air supply to the tool and write
or have written a warning note and
attach itto the tool.
- If tool isto be usedwith a balanceror
other suspension device, ensurethat
the tool is firmly attached to the
Easy To Reach And
Air Tool
suspensionlsupport device.
Operate Shut Off Valve
-When operatingthetool, alwayskeep
the body and particularly the hands
away from the working attachment
fixed to the tool.
-The tool is not electrically insulated.
Never use the tool if there is any
Page No
1
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com