Model
5978A
118"
(3
mm)
PencilAir Die Grinder
Operator Instructions
Includes
-
Foreseen Use,Work Stations, Putting Into Service,
Operating, Dismantling,AssemblyandSafety Rules.
Manufacturer/Supplier
SiouxTools,
Inc.
250 Snap-on Drive
P.O. Box1596
Murphy, NC28906
U.S.A.
Tel No. 828-835-9765 FaxNo. 828-835-9685
Product NetWeight Recommended Use
Of
0.44 Ibs Balancer OrSupport
0.20
Kg
NO
Air Pressure
RecommendedWorking 6.2 bar 90 PSI
Maximum 6.2 bar
90
PSI
Personal
Safety
Equipment
a
Always
Read
Instructions
Before UsingPowerTools
e
-
a asses
YE
1
H^s
wear
Use
-
Safety Gloves YES
Goggles
Safety ruleswhen using
5978A
Pencil DieGrinder
Use
-
Safety Boots
Use
-
Breathing
Masks YES
Use
-
Ear Protectors YES
-
Use accessories rated at least
54.000
RPM.
-
Prolongedexposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained initsuse and aware of
these safety rules.
-
Do not exceedthe maximumworking air pressure.
-
Use personalprotectionequipmentas recommended.
-Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicalsknowntocausecancer, birthdefectsand other
reproductiveharm.
-Use only compressed air at the recommended
conditions.
-
If the tool appears to malfunction, remove from use
immediatelyand arrange for service
and reoair. If it is not oractical to
7
@
Wear
Hearing
Protection
A
~~b~~~ged
Expsure
remove tool from service, then shut
off the air supply to thetoolandwrite
or have written a warning note and
attach itto the tool.
-
If tool isto be usedwith a balanceror
othersuspensiondevice, ensurethat
the tool is firmly attached to the
suspension/supportdevice.
-When operatingthe tool, always keep
the body and particularly the hands
away from the working attachment
fixed to the tool.
-The tool is not electrically insulated.
Never use the tool if there is any
Form
#
ZCE568A
Date 6-03lA
Important
Read these instructions carefully before installing,operating,
servicingorrepairingthistool. Keeptheseinstructionsinasafe
accessibleolace.
ModelNotNos
ProductType
118"
(3
mm)
Pencil
Air DieGrinder
Serial No.
RPM
Cycles
Per
~m.
54000
Noise Level: SoundPressure Level 72.0 dB(A)
SoundPower Level 84.0 dB(A)
ce
Recommended Hose Bore
Size
-
Minimum
5/16 ins 8 mm
Test Method: Tested
in
accordance with Pneurop
test code PN8NTC1 andISO Standard 3744
-'
>
*
Recommended Max.
Hose Length
30 Ft 10
M
vibration Level 2.0 Meters
/
Sec2
Test Method: Tested
in
accordancewith IS0
standards 8662 Parts
1
&
13
chance of coming intocontactwith live electricity.
-Always when usingthe tool, adoptafirm footing and/or
positionand grip the tool sufficiently only to overcome
any reactionforces that may resultfrom the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicingand repairsshouldonly be carried out
by personstrainedto do so.
-
Do not lock, tape, wire, etc. the 'OnIOtf valve in'On'
position.The triggerllever, etc. must always be free to
returnto the 'Off' positionwhen released.
-Always shut off the air supply to the tool and press the
On/Off1valve to exhaust the air from the feed hose
before fitting, removing or adjusting the working
attachmentfittedto the tool.
-
Before usingthe tool, make sure that a shut off device
Take
Air
FromTop
All
Pipe
And
Fittings
Should
Be
112"
Or
Larger
Compressor
with
Sufficient
Capacity
To Maintain
Recommended
Working
Pressure
At
EachTool
Outlet
Drain
Daily
L
RecommendedAir Supply System Figure
1
Page No
1
