Siqura SA-BL37 User manual

Unpack
Connector Definition
Installation Notices Connectors
Drill diagram
Mounting
SA-BL37
2MP Corrosion proof compact bullet, 3.7mm
Quick Start Guide
Find additional manuals, the datasheet,
the EU Declaration of Conformity, and
the latest firmware for this product at:
Siqura.com/downloads/software
SA-BL37 Camera Unit
Note 1: Subject to modification. Actual product and accessories may differ in appearance.
CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY.
INSTALLATIONSHALL BE IN ACCCORDANCE WITH LOCAL PROCEDURES.
THE CAMERA CONTAINS BATTERIES. DISPOSE OF USED BATTERIESIN
ACCORDANCEWITH LOCAL REGULATIONS.
IF YOU USE AN EXTERNALPOWER SUPPLY, CONTACT SIQURA TO MAKE SURE
THAT THE POWER SUPPLY HAS THE PROPER POWER SPECIFICATIONS.
MAKE SURE THAT THE POWER SUPPLY COMPLIES WITH LPS REQUIREMENTS.
THE CAMERA IS TO BE CONNECTEDONLY TO POE NETWORKSWITHOUT
ROUTINGTO THE OUTSIDE PLANT. For the connector definitions, see table 1.
© Siqura B.V. 2020
Version 1.1 (20201119)
SA-BL37 QSG
Table 1 Connector definitions
RJ45 water protection (IP66/67)
NO
Item Description
1
RJ
-45
Ethernet, RJ
-45 port compatible
with 10/100Mbps
PoE Modular Jack
2
DC
Jack
Main
Power,DC Jack, 12Vdc
3
AI
:Alarm In
Alarm
input and output, 3pin terminal
G
: GND
AO
:Alarm Out
4
MIC
: Audio In
Audio
line input, 2pinterminal
G
: GND
5
SPK
:AudioOut
Audio
line output, 2pinterminal
G
: GND
Upright mount
Ceiling mount
Dimensions in mm.
Dimensions in mm.

Default IP address Accessing the camera Auto detect with SDM2
1st time camera login Browser-based viewer Browser-based Viewer
IP = dhcp
Network Switch
DHCP
Siqura.com/downloads/software
SDM2-vx.xx-setup.zip
2
1
admin
admin
qwer1234
x6W@oM0a!9#
Modify user with
strong password
x6W@oM0a!9#F
1
2
2
3
4
5
IP = 192.168.30.1
Netmask: 255.255.255.0
IP = 192.168.30.220
Network Switch
DHCP
3