Sirona c8+ turn User manual

ATTENTION!
Patient simulator must be able to move "FREELY".
There must be no obstacles in the travel range!
Simulation workstation brief operating instructions
+
C8
Control panel on the dentist element
Main device switch ON (I)/OFF (0)
Motor speed controller/SIROSONIC L intensity
Spray instrument control
Motor rotation clockwise/counter-clockwise
Motor speed display/SIROSONIC L intensity
I
O
P
12
S0
ENDO
100
1
20
40
60
80
B
CD
A
B
CD
A
A
CD
B
B
A
B
A
D
F
E
C
L
"Patient simulator" mechanical setting
K
P
B
P
12
S0
ENDO
100
1
20
40
60
80
I
E
A
D
C
G
H
P1 P1
1
23
A
B
C
1
0
I
3
2
M
K
J
I
L
F
Operation light ON/OFF
G
Composite ON/OFF
H
Pneumatic foot switch
1 Start instruments
2 Spray ON/OFF
3 Chip Blower
I
Option: Foot switch, can be controlled electrically
1 Foot pedal for speed control during speed foot control functions
2 Instrument spray ON/OFF
3 Chip blower on the treatment instrument
J
Configuration on the highspeed handpiece
1. Remove motor è An LED on lights up
2. Remove motor hose – attach highspeed handpiece hose
3. Press button for > 10s
4. All LEDs on light up (configured on highspeed handpiece)
E
F
E
Configuration on the motor
1. Remove highspeed handpiece è All LEDs on light up
2. Remove highspeed handpiece hose – attach motor hose
3. Press button for > 10s
4. An LED on lights up (configured on motor)
E
F
E
1. Tilt adjustment: Release "tilt" clamping lever (A)
Tilt patient simulator to the desired position
Re-secure clamping lever
2. Rotation: Release "rotation" clamping lever (B) Rotate
patient simulator into the desired position
Re-secure clamping lever
3. Height adjustment: Press to release locking lever (C)
Move patient simulator into the desired position
Re-secure clamping lever
"Patient simulator" electrical setting
L
1. Tilt adjustment: Press the button (C or D) on the dentist
element or the 4-way foot switch (C or D)
è Patient simulator tilted DOWN/UP
2. Rotation (mechanical): Release "rotation" clamping lever (B)
Rotate patient simulator into the desired position
Re-secure clamping lever
3. Height adjustment: Press the button (A or B) on the dentist
element or the 4-way foot switch (A or B)
è Patient simulator DOWN/UP
Adjusting the articulating headrest
M
Tilt the headrest backward using the locking button (A)
Tilt the headrest forward by simply pulling it out

Quick maintenance and cleaning of simulation workstation + C8
Instrument hoses/instrument rack Suction handpiece/saliva ejector
Wipe disinfection
Wipe disinfection
Place the foot switch in the bracket at the end of the working day.
Wipe the base of the foot switch with a damp cloth.
I
P
12
S0
ENDO
100
1
20
40
60
80
B
134°C
3 min
According to manufacturer's
specifications
No amalgam!
According to manufacturer's
specifications
274°F
i
Sirona Dental Systems GmbH 2012, Fabrikstraße 31, 64625 Bensheim, www. sirona.com - We reserve the right to make any alteratios which may be required due to technical improvments.
D 3552.202.01.01.02 03.2012 63 87 422 Ä-Nr.: 000 000 Sprache: englisch
C
Every 2 hours, 2 glasses of water
Every day after work 1 liter of water
= SYNTHESO PRO AA2, Order No.: 34 42 019
B
For care and cleaning of the motors, the straight and contra-angle handpieces, and the
highspeed handpieces, please refer to the corresponding instructions for use.
CAUTION
Use only cleaning agents approved by Sirona! A regularly updated list of
approved agents can be found under REF 59 70 905 on the Sirona homepage on the
Internet: www.sirona.com.
CAUTION
Use only cleaning agents approved by Sirona! A regularly updated list of approved
agents can be found under REF 59 70 905 on the Sirona homepage on the Internet: www.sirona.com.
I
I
O
O
P
12
S0
ENDO
100
1
20
40
60
80
Simulation unit
+
C8 Premium
Simulation unit
+
C8 Eco