Sizewise Rest Secure System User manual

Rest Secure System™
Quick Reference Guide
This card is not meant to replace
product user manual. For complete
manual, contact Sizewise.
800-814-9389
sizewise.com

12 4 hrs
1. Plug into wall AC power.
2. Plug in Nurse Call interface (if applicable).
3. Press enter button to take system out of standby.
System Setup
Keypad Variants
Bed Exit
Protocol Timer
Volume Control
Zero Button
Back Button
Menu Button
Enter Button
Rev. 1 Buttons Rev. 2 Buttons

Press or
View patient weight on monitor.
System will enter standby after 60 seconds of inactivity.
Press and hold button for 3 seconds before placing
patient in bed.
Press or
Select SCALE SETTINGS and press ENTER.
Select CHANGE TO LBS or CHANGE TO KGS and press ENTER.
Press or
Select ADD/REMOVE ITEMS and press ENTER.
Press ENTER after changes are made.
See User Manual to customize time of weight history reading and alarm types/sounds.
Zero Scale
Weighing Patient
To change Lbs/Kgs
Add Remove Items
Set protocol reminder for 1, 2, or 4 hours.
Press to select desired time.
To disable: Press timer button until indicator lights are o.
Protocol Timer
.
.
.

sizewise.com 800-814-9389
PRD-0002J-0319 27650043, Rev. 1.0
Activate Alarm
Patient must be in bed prior to activation.
Press or to set desired sensitivity:
High Sensitivity: Do not use with alternation therapy
support surface.
Medium Sensitivity: Do not use with rotation therapy
support surface.
Low Sensitivity: Detects when patient has exited the bed.
Reset Alarm
Place patient back in bed. Press or to reset the
alarm and restart monitoring.
Disable Alarm
Press and hold or for 3 seconds to silence and
disable alarm.
Bed exit alarm must be reactivated after being disabled.
Press to select desired sound level.
NOTE: When bed exit alarm/protocol timer are disabled, the sound level indicator
lights will be off.
Bed Exit Alarm
Adjusting Alarm Volume