Sizewise Bari Rehab Platform 3 Series User manual

Bari Rehab Platform 3™
Quick Reference Guide
This card is not meant to replace
product user manual. For complete
manual, contact Sizewise.
800-814-9389
sizewise.com

Components
Side Rail Installation/Removal
Slide rail into top deck Install lock pin
Removal: pull out pin and lift rail straight up
Side Rail Adjustment
Push to adjust rail Position side rail
To adjust: squeeze knobs while placing rail in desired
position
Head Board
Head Angle
Indicator
Adjustable Side Rail Rest Secure System™
Info Pocket
Foot Board
Emergency
Hand Crank
Accessory Bar
Brake and
Steer Casters Side Bumper

Casters
Lever
Head and Foot casters lock and swivel
• To ENGAGE, press lever down
• To DISENGAGE, raise lever
Hand Control
Engage brake casters before operating bed
Swivel Point
Head/Foot
section
Hold to
atten bed
for CPR Cardiac Chair
Position
Trend/
Reverse Trend
Bed height
Expanding/Retracting Bed Deck
Position knob to UNLOCK while
pulling out/pushing in section
Expand/Retract all sections on
both sides to 48”/39” width

Emergency Hand Crank
Code Situation
sizewise.com 800-814-9389
OPS-0029-0418 27650034 Rev. 1.0
Located under foot section of deck, mounted to motor box cover.
Remove crank and insert into desired function. Crank either
clockwise or counterclockwise to operate. Bed functions located at
both foot and head section of bed.
Foot section: up/down knees, up/down foot section
Head section: up/down torso, up/down head section
1. Unlock casters and pull bed from wall.
2. Engage brakes, remove headboard, and lower side
rails for patient access.
3. Flatten bed by holding CPR button on hand control.
4. If using air surface, activate CPR switch on blower and
open CPR valve at head of mattress.
5. Proceed with facility protocols
for resuscitation.
Troubleshooting
If bed fails to function:
1. Verify power cord is properly plugged in.
2. Verify main power switch is turned on
3. Verify hand control is plugged into control module at
head of bed
4. Verify power source.
5. For further assistance, call 800-814-9389.