Sizewise Rotate User manual

Rotate™ and Big Turn™
Quick Reference Guide
See reverse side for additional instructions
Operating Instructions
1. Locate both power switches on left side of control unit.
2. Turn both switches to ON position.
Mattress Ination/Autorm
Press AUTOFIRM button to fully inate surface. Transfer
patient to surface. AUTOFIRM times out after 10 minutes
and resets to previous setting. To manually exit, press
AUTOFIRM a second time.
Rotation Therapy
1. Choose desired turn by pressing corresponding button:
• Right or Left Turn: maintains a turning cycle only to
the selected side
• Full Turn: provides left, center, and right rotational
therapy (CLRT)
2. After selecting desired turn, press CYCLE TIME -/+
buttons until desired time is reached. If using left or
right turn as a holding cycle, press RIGHT or LEFT
button until Hd shows on screen. Patient will be held
on desired side.
3. After selecting therapy, pressing TRAINING MODE
will slowly acclimate patient to therapy over a period
of 60 minutes.
Pulsation Therapy
1. Press PULSATE button until desired time is reached
(3, 5, or 10 min).
2. Set rmness using FIRM/SOFT buttons based on
patient comfort and clinical discretion.
Static Therapy
1. Press STATIC button.
2. Set rmness using FIRM/SOFT buttons
based on patient comfort and clinical discretion.

Fowler: Increases airow when head section of bed is
elevated. Newer models include an Auto Fowler feature.
Firm/Soft: Increases (FIRM) or decreases airow (SOFT)
creating a rmer or softer surface.
Lockout: Locks control panel (auto after 3 min).
To unlock, press and hold for 3 sec.
Alarm Reset: Light remains illuminated until problem is
corrected.
FOWLER
Other Features
CPR/Quick Deflation
Patient Transport
sizewise.com 800-814-9389
OPS-0044-0718 27650035 Rev. 1.0
1. CPR control is on front of control unit.
Depending on model, push red button
or turn dial clockwise to activate CPR.
Alarm will sound.
2. Locate red CPR valve at head of
mattress. Turn valve for quick air release.
-OR- Locate hose connection to control
unit (all models). Disconnect for quick
air release.
1. Activate Autorm mode for 3-5 minutes to ensure mattress
is completely inated.
2. Turn both power switches o (left side of control unit).
Unplug from wall.
3. Mattress will slowly deate. As patient sinks into mattress,
patient will rest on foam transport pad.
This card is not meant to replace product user
manual. For complete manual, contact Sizewise.