
Page 6
EN
The product, reservoir unit of the series:
KFG, KFGS, KFGL, KFGC
is hereby confirmed to comply with the essen-
tial protection requirements stipulated by the
Directive(s) of the Council on the approximati-
on of laws of the Member States concerning:
Machinery Directive 2006 2006/42/EG
Electromagnetic Compatibility 2014/30/EU
Low Voltage Devices 2014/35/EU
RoHS II Directive 2011/65/EU
Notes:
Information concerning EC Declaration of Conformity and EC Declaration of Incorporation
Information concerning EC Declaration of Conformity and EC Declaration of Incorporation
The product is neither designed nor approved
for use in conjunction with fluids of Group 1
(Dangerous Fluids) as defined in Article 2,
Para. 2 of Directive 67/548/EEC of J
une 27, 1967. The product is neither designed
nor approved for use in conjunction with gases,
liquefied gases, pressurized gases in solution,
vapors and such fluids whose vapor pressure
exceeds normal atmospheric pressure
(1013 mbar) by more than 0.5 bar at their
maximum permissible temperature.
When used in conformity with their intended
use, the products supplied by SKF Lubrication
Systems Germany GmbH do not reach the limit
values listed in Article 3, Para. 1, Clauses 1.1 to
1.3 and Para. 2 of Directive 97/23/EC. They are
therefore not subject to the requirements of
Annex 1 of the Directive. Consequently, they do
not bear a CE marking in respect of Directive
97/23/EC. SKF Lubrication Systems Germany
GmbH classifies them according to Article 3,
Para. 3 of the Directive. The Declaration of
Conformity and Incorporation forms part of
the product documentation and is supplied
together with the product.
(a) This declaration certifies compliance with
the aforementioned Directives, but does not
constitute a guarantee of characteristics.
(b) The safety instructions in the documentati-
on included with the product must be
observed.
(c) The commissioning of the products here
certified is prohibited until such time as the
machine or vehicle in which the product is
installed conforms with the provisions and
requirements of the applicable Directives.
(d) The operation of the products at non-
standard supply voltage, as well as non-
adherence to the installation instructions,
can negatively impact the EMC characteris-
tics and electrical safety.
We further declare:
The aforementioned product is, according
to EC Machinery Directive 2006/42/EC,
Annex II Part B, designed for installation
in machinery / for incorporation with other
machinery to form a machine. Within the
scope of application of the EC Directive,
commissioning shall be prohibited until the
machinery in which this part is installed
conforms with the provisions of this
Directive.
The aforementioned product may, with re-
ference to EC Directive 97/23/EC concer-
ning pressure equipment , only be used in
accordance with its intended use and in
conformity with the instructions provided in
the documentation. The following must
be observed in this regard:
KFG KFGS KFGL KFGC